Hillsdale Furniture CAMERON X-BACK 4671-826 User manual

F
D
A
F
D
A
QTYPART
8A
9C
16
2
E
QTY
8
25
7
PART
B
D
F
HARDWAREHARDWARE
1J
G 4H
CAMERON X-BACK SWIVEL STOOL
Model #4671-826 Swivel Counter Stool
Model #4671-830 Swivel Bar Stool
Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure
that all components are in proper position, tight and free from damage. Keep this assembly instruction for future reference. Adult assembly
is required. Customer Service Phone Number: 502-562-0000
FURNITURE, LLC.
HILLSDALE
HARDWARE LIST
A
B
C
D
E
F
G
H
J
(8)
(8)
(9)
(25)
(16)
(7)
(2)
(4)
(1)
1/4” x 1-1/8” Allen Bolts
1/4” x 1/2” Allen Bolts
1/4” x 5/8” Allen Bolts
1/4” Spring Washers
1/4” Small Flat Washers
1/4” Large Flat Washers
1/4” Camber Washers
5 x 30mm Wood Screws
1/4” Allen Wrench
PARTS LIST
K
L
M
N
P
R
(1)
(1)
(1)
(4)
(1)
(1)
Stool Back
Seat Base
Stool Base
Legs
Support Ring
Seat Cushion
Date: 07-01-2011
Page 1 of 2
CARE & MAINTENANCE : The touch ofa soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
as they may cause damage to the finish. Periodic checks are recommended to make sure that all bolts, screws and nuts are securely tightened.
F
D
C
STEP 1
Begin assembly by attaching the Stool Back (K) to the
Seat Base (L) using 2 Allen Bolts (A), 2 Spring Washers
(D) & 2 Camber Washers (G) from the inside (See
Figure 1); as well as 2 Allen Bolts (A), 1 Allen Bolt (C), 3
Spring Washers (D) & 3 Large Flat Washers (F) from the
outer backside (See Figure 2). Tighten all bolts using the
Allen Wrench (J) to secure in place.
FIGURE 1
FIGURE 2
K
L
K
L
ADG
ADG

F
D
A
CAMERON X-BACK SWIVEL STOOL
Model #4671-826 Swivel Counter Stool
Model #4671-830 Swivel Bar Stool
FURNITURE, LLC.
HILLSDALE
E
D
C
E
D
B
E
D
B
Date: 07-01-2011
Page 2 of 2
CARE & MAINTENANCE : The touch ofa soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
as they may cause damage to the finish. Periodic checks are recommended to make sure that all bolts, screws and nuts are securely tightened.
FIGURE 3
FIGURE 5
STEP 2
Next, attach the Legs (N) to the bottom of the Stool Base (M) using 2 Allen
Bolts (C), 2 Spring Washers (D) & 2 Small Flat Washers (E) per each leg. Do
not fully tighten bolts. See Figure 4.
STEP 3
Attach the Support Ring (P) to the bracket outside of the Legs (N) using 2 Allen
Bolts (B), 2 Spring Washers (D) & 2 Small Flat Washers (E). See Figure 3.
Tighten all bolts from Steps 2 & 3.
STEP 4
Attach the Seat Cushion (R) to the top of the
Seat Base (L) using 4 Wood Screws (H) to
secure in place. See Figure 5. Tighten all
screws only using a philips head screwdriver
(not included). Do not over tighten.
STEP 5
Finally, attach the Seat Base (L) to the Stool
Base (M) at the swivel metal plate from the
bottom using 4 Allen Bolts (A), 4 Spring
Washers (D) & 4 Large Flat Washers (F) to
secure in place. See Figure 5. Tighten all
bolts. The assembly is now complete.
P
M
N
N
H
H
L
M
R
HH
H
Bracket
FIGURE 4
PN