Hillsdale Furniture Corbin 4327-881 User manual

Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that all components are
in proper posion, ght and free from damage. Keep this assembly instrucon for future reference. Adult assembly is required. The product of Hillsdale Furniture,
LLC is designed for residenal use only. Customer Service Phone Number: 502-562-0000
Date: 10-28-2016
Page 1 of 2
Corbin Cocktail Table - Top Shelf Glass W/Round Bottom Ring
Model #4327-881
QTYCODE HARDWARE
8
4
4
4
4
1
1
2
3
4
5
6
1/4” x 15mm Sunk Bolts
1/4” x 15mm Allen Bolts
Ф6.5 Spring Washers
Ф6.5 x δ1.5 Flat Washers
Glass Pads
Allen Wrench
CARE & MAINTENANCE : The touch ofa so cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing, as they may
cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely ghtened.
HDFBP
• Do not let any sharp objects touch or rub the surface of the product.
• When assembling, do not let children play around the working area.
• Please confirm all parts are correct before starng the assembly process.
• Do not ghten all bolts and screws completely unl the enre unit has been assembled and set up.
• Be careful if using power tools as they can over ghten screws and strip threads.
WARNING
QTYCODE COMPONENTSCOMPONENTS
1A
CODE
B Glass TopTable Top Frame
1CSupport Ring
QTY
1
D Legs4
B
C
D
D
D
D

55
2
3
4
Date: 10-28-2016
Page 2 of 2
Corbin Cocktail Table - Top Shelf Glass W/Round Boom Ring
Model #4327-880
CARE & MAINTENANCE : The touch ofa so cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing, as they may
cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely ghtened.
STEP 1 - Figure 1
Begin assembly by aaching Support Ring (C) to Legs (D) using
2 Allen Bolts (2), 2 Spring Washers (3) and 2 Flat Washers (4) per
leg. Do not ghten bolts at this me.
STEP 2 - Figure 2
Aach Legs (D) to Table Top Frame (A) using 2 Sunk Bolts (1) per
leg. Tighten all bolts from steps 1 and 2 with Allen Wrench (6)
provided.
STEP 3 - Figure 3
Aach Glass Pads (5) to tabs on Table Top Frame (A).
STEP 4 - Figure 4
Carefully place Glass Top (B) down into Table Top Frame (A). The
assembly is now complete.
C
2
3
4
FIGURE 1
1
1
FIGURE 2
D
A
D
D
D
D
5
5
FIGURE 3
A
D
D
D
D
B
A
FIGURE 4