Hillsdale Furniture RICHMOND 1078-570 User manual

Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that all
components are in proper position, tight and free from damage. Keep this assembly instruction for future reference. Adult assembly is required.
The product of Hillsdale Furniture, LLC is designed for residential use only. Customer Service Phone Number: 502-562-0000
Date: 10-24-2016
Page 1 of 1
RICHMOND HEADBOARD
Model #1078-570 - Queen
Model #1078-670 - King
HARDWARE LIST
A (10) M8*50 Bolts
B (10) M8 Spring Washers
C (14) M8 Flat Washers
D (1) Ø5 Allen Wrench
E (4) M8 Nuts
F (1) Ø5 Open End Wrench
PARTS LIST
G (1) Headboard Panel
H (2) Headboard Legs
CARE & MAINTENANCE : The touch ofa soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
as they may cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely tightened.
QTYPART
10A
4E
HARDWARE QTYPART HARDWARE
10
1
B
F
14C 1D
H
H
G
Back
of Leg
STEP1 - Figure 1
Begin assembly by attaching the Headboard (G) to
the Headboard Legs (H) using 3 Allen Bolts (A), 3
Spring Washers (B) & 3 Flat Washers (C) from
behind for each leg.
STEP2 - Figure 2
Attach the Side Rails (sold separately) to the Headboard Legs
(H) using 2 Allen Bolts (A) and 2 Flat Washers (C) on the
outside and 2 Hex Nuts (E), 2 Spring Washers (B) and 2 Flat
Washers (C) on the inside. Tighten all bolts with Allen Wrench
(D) and all nuts with Open Wrench (F) both provided.
FIGURE 2
FIGURE 1
Holes for
Cal King
AA
A
A
B
B
B
B
C
C
C
C
C
C
E
E
**
The Side Rails are not
included. Sold Separately

Date: 10-19-2016
Page 1 of 1
RICHMOND KING FOOTBOARD AND SLATS
Model #1078-680
HARDWARE LIST
A (8) M8*30mm Allen Bolts
B (8) M4*30mm Screws
C (1) Allen Wrench
D (8) Adjustable Feet
E (4) M8*50mm Allen Bolts
F (4) Spring Washers
G (4) Flat Washers
PARTS LIST
H (4) Slats
I (8) Support Legs
J (1) Footboard
CARE & MAINTENANCE : The touch ofa soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
as they may cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely tightened.
QTYPART
8A
1C
HARDWARE QTYPART HARDWARE
8
8
B
D
4E
4G
4F
STEP 1 - Figure 1
Attach Side Rails to Footboard (J) using 2 Long Bolts (E), 2 Spring Washers (F) and 2 Flat Washers (G) per
side. Hand tighten bolts only.
STEP 2 - Figure 2
Attach the Adjustable Feet (D) to the Support Legs (I) by screwing them into place.
STEP 3 - Figure 3
Attach Support Legs (I) to Slats (H)
using 1 Short Bolt (A) per leg. Tighten
all bolts with Allen Wrench (C) provided.
Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that all
components are in proper position, tight and free from damage. Keep this assembly instruction for future reference. Adult assembly is required.
The product of Hillsdale Furniture, LLC is designed for residential use only. Customer Service Phone Number: 502-562-0000
AA
B
B
D
D
H
H
H
H
I
I
I
I
IHI
I
I
I
I
The Side Rails are not
included. Sold Separately
FIGURE 3
FIGURE 4
FIGURE 2
STEP 4 - Figure 4
Attach Slats (H) to
Side Rails using 2
Wood Screws (B)
per beam. Tighten
with philips head
screwdriver (not
included). The
assembly is now
complete. EE
E
E
F
F
F
F
G
G
G
G
J
J
FIGURE 1