Hillsdale Furniture Harbortown 1610-500 User manual

D
C
A
A
C
D
A
C
D
D
C
A
Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended
to insure that all components are in proper position, tight and free from damage. Keep this assem ly instruction for future
reference. Adult assem ly is required. Customer Service Phone Num er: 502-562-0000
08/16/10
Page 1 of 3
FURNITURE, LLC.
HILLSDALE
HARBORTOWN QUEEN PLATFORM BED
Model #1610-500/550 Black Vinyl
Model #1611-500/550 Brown Vinyl
STEP 1
Begin assem ly y attaching each Head oard Post (H)
to the ack of the Head oard Panel (G) y aligning holes
and using 2 Allen Bolts (B), 2 Spring Washers (C) & 2
Flat Washers (D) to secure in place. Tighten all olts
using the Allen Wrench (F) that has een provided.
HARDWARE LIST
(14) Allen Bolts M8 x 40mm
(4) Allen Bolts M8 x 50mm
(13) Spring Washers M8
(13) Flat Washers M8
(2) Wood Screws M4 x 40mm
(1) Allen Wrench M5
(1) Allen Bolts M8 x 60mm
PARTS LIST
(1) Head oard Panel
(2) Head oard Posts
(1) Foot oard Panel
(1) Left Side Rail
(1) Right Side Rail
(1) Support Bar
(1) Center Support
(3) Support Legs
(26) Slats
(26) End Caps
(13) Center Caps
A
B
C
D
E
F
T
G
H
J
K1
K2
L
M
N
P
R
S
B
CD
A
E
F
G
H
J
H
D
C
A
A
C
D
B
C
D
A
C
D
A
STEP 2
Next attach each Side Rail (K) to the
Head oard Posts (H) y aligning holes
and securing with 2 Allen Bolts (A), 2
Spring Washers (C) & 2 Flat Washers
(D) per each side. Do not fully tighten
olts until assem ly is near completion.
STEP 3
Attach the remaining ends of the Side
Rails (K) to the Foot oard Panel (J) y
aligning holes and securing with 2 Allen
Bolts (A), 2 Spring Washers (C) & 2 Flat
Washers (D) per each side. Do not fully
tighten olts until assem ly is near
completion.
*See next page for more assem ly.
C
D
T
B
C
D
K 1
K 2

08/16/10
Page 2 of 3
L
M
N
N
K 1
J
G
N
A
AAA
AA
STEP 6
Once in place, secure the Center Support (M)
to the Support Bar (L) y fitting the metal
support in place and securing from the ackside
with 1 Allen Bolt (T), 1 Spring Washer (C) & 1
Flat Washer (D). Do not fully tighten olt. See
Figure 1 a ove.
STEP 7
Also secure the Center Support (M) to the
inside of the Foot oard Panel (J) y fitting the
metal supports in place and securing each end
with 1 Wood Screw (E). Tighten all olts and
screws. See Figure 2 a ove.
*See next page for more assem ly.
E
T
C
D
Figure 1
Figure 2
MAIN ILLUSTRATION
View from
assembly side
STEP 4
Secure the Support Bar (L) to the
inside of each Side Panel (K1 & K2)
at the Head oard y fitting the metal
supports in place on each end making
sure each is secured in place. See
Figure 2 a ove
K 2
STEP
Attach each Support Leg (N)
to the Center Support (M)
with 2 Allen Bolts (A) to
secure in place. See the
Main Illustration.

CARE & MAINTENANCE : The touch of a soft cloth is all the maintenance the finish will ever need.
Please do not use harsh or a rasive cleaners for polishing, as they may cause damage to the finish.
Periodic checks are recommended to make sure that all olts, screws and nuts are securely tightened.
08/16/10
Page 3 of 3
P
PS
R
P
STEP 8
Attach one End Cap (R) to one end of
each Slat (P) y fitting in place.
STEP 9
Secure each set of 13 Slats (P) together
in the center with 1 Center Cap (S) y
fitting into place.
STEP 10
Once assem led secure each slat to
the Side Rails (K1 & K2) and Center
Support (M) y guiding plastic teeth in
place into the open holes. Press firmly
to e sure each slat is tight. The
assem ly is now complete.
MAIN ILLUSTRATION
Figure 1
Figure 2
Assem ly of all slats not shown in the
illustration a ove. Assem le all slats efore
securing to the side rails.
P
P
R
S
R