Hillsdale Furniture 62576A User manual

Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure
that all components are in proper position, tight and free from damage. Keep this assembly instruction for future reference. Adult
assembly is required. ustomer Service Phone Number: 502-562-0000
Page 1 of 3
04/05/10
FURNITURE, LLC.
HILLSDALE
OAK BAR / CHERRY BAR
Model #62576A / 62577A / 62586A Oak Finish
Model #62578A / 62579A / 62588A Cherry Finish
PARTS LIST
(1) Bar
(1) Bar Top
G
H
HARDWARE LIST
(28) Wood Screws M8 x 3/4
(4) Wood Screws M8 x 5 3/4
(2) Metal Screws M5 x 1/4
(7) Metal Brackets
(2) Metal Feet Supports
(1) Foot Rest
A
B
D
E
F
AD
CARE & MAINTENANCE : The touch of a soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for
polishing, as they may cause damage to the finish. Periodic checks are recommended to make sure that all bolts, screws and nuts are securely tightened.
B
STEP 1
Begin assembly by attaching the Bar Top (H) to the Bar (G) by attaching each Metal Bracket (D) to
the Bar (G) using 2 Wood Screws (A) per each bracket. Once secured, rest Bar Top in place and
secure using also 2 Wood Screws (A) to hold in place. Tighten all screws only using a phillips head
screwdriver (not included).
STEP 2
Attach each Metal Foot Support (E) to the front of the Bar (G) using 2 Wood Screws (B) per each
support. Tighten all screws.
STEP 3
Insert the Foot Rest (F) into the Metal Feet (E) by sliding in place and securing with 1 Metal Screw
( ) per each side. Tighten all screws. The assembly is now complete.
C
G
B
B
A
A
AA
H
E
E
F

Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure
that all components are in proper position, tight and free from damage. Keep this assembly instruction for future reference. Adult
assembly is required. ustomer Service Phone Number: 502-562-0000
Page 2 of 3
04/05/10
FURNITURE, LLC.
HILLSDALE
PARTS LIST
(1) Bar
(1) Bar Top
(1) Shelf
(2) Fasteners
F
G
H
J
HARDWARE LIST
(8) Wood Screws M8 x 1 1/2
(4) Shelf Supports
(8) Allen Bolts 1/4 x 1
(8) Flat Washers 1/4
(1) Allen Wrench 1/4
A
B
D
E
A
CARE & MAINTENANCE : The touch of a soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for
polishing, as they may cause damage to the finish. Periodic checks are recommended to make sure that all bolts, screws and nuts are securely tightened.
B
STEP 1
Begin assembly by attaching the Bar Top (G) to the Bar (F) by aligning holes and securing with 8
Wood Screws (A) to hold in place. Tighten all screws only using a phillips head screwdriver (*Not
Included).
STEP 2
Insert each Shelf Support (B) and carefully insert the Shelf (H) and place on top of each support. The
shelf should be sitting on an even plane. The assembly is now complete.
C
H
F
B
DE
H
F
G
A
A
A
A
OAK BAR / CHERRY BAR
Model #62576A / 62577A / 62586A Oak Finish
Model #62578A / 62579A / 62588A Cherry Finish

D
D
D
D
D
D
D
D
NOTE: Only ONE Side Bar is included with your
purchase. Diagram only shows TWO for your illustration
of attaching this to either side of the Main Bar.
* * * ASSEMBLY * * *
Once you have decided which side you
will be attaching your Side Bar, attach
each Wood Brace (J) to bottom of each
Bar Top on Large Bar & Side Bar, using
4 Allen Bolts ( ) & 4 Metal Washers (D)
per each brace. Tighten all bolts only
using Allen Wrench (E) provided. The
assembly of your Bar is now complete.
Please keep this instruction sheet for
future references.
Page 3 of 3
04/05/10
J
J