Hillsdale Furniture 50973 User manual

Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that all
components are in proper position, tight and free from damage. Keep this assembly instruction for future reference. Adult assembly is required.
The product of Hillsdale Furniture, LLC is designed for residential use only. Customer Service Phone Number: 502-562-0000
Date: 12-04-2013
Page 1 of 2
CANAL STREET VANITY STOOL
Model #50973
HARDWARE LIST
A (4) Allen Bolts 1/4” x 1/2”
B (12) Allen Bolts 1/4” x 3/4”
C (12) Flat Washers
D (8) Spring Washers
E (1) Allen Wrench
PARTS LIST
F (1) Back Panel
G (1) Seat Frame
H (1) Cross Brace
I (2) Front Legs
J (1) Back Leg Panel
K (1) Seat Cushion
QTYPART
4A
12C
HARDWARE QTYPART HARDWARE
12
8
B
D
1E
CARE & MAINTENANCE : The touch ofa soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
as they may cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely tightened.
AA
A
AB
B
B
B
C
C
D
D
D
D
F
STEP 2 - Figure 2
Attach Seat Frame (G) to Back
Panel (F) by aligning the open
holes and securing with 4 Allen
Bolts (B), 4 Spring Washers (D),
& 4 Flat Washers (C) to secure
each in place. Do not tighten
bolts for this step.
STEP 3 - Figure 2
Attach Cross Brace (H) to rear
legs on Back Leg Panel (J) using
1 Sunk Bolt (A) per side. Do not
tighten bolts for this step.
STEP 1 - Figure 1
Begin assembly by inserting Back Panel (F) into
Back Leg Panel (J) making sure to line up holes.
CC
FIGURE 1
F
J
J
BB
C
C
D
D
GFIGURE 2
H
BB
C
C
D
D

CANAL STREET VANITY STOOL
Model #50973
Date: 12-04-2013
Page 2 of 2
FIGURE 4
CARE & MAINTENANCE : The touch ofa soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
as they may cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely tightened.
STEP 4 - Figure 3
Next, attach each Front Leg (I) to the bottom of
Seat Frame (G) using 2 Allen Bolts (B), 2 Spring
Washers (D), & 2 Flat Washers (C) to secure
each in place. Do not tighten bolts for this step.
STEP 5 - Figure 3
Attach Cross Brace (H) to Front Legs (I) using 1
Sunk Bolt (A) each. Tighten all bolts using Allen
Wrench (E) provided.
STEP 6 - Figure 4
Finally attach Seat Cushion (K)
to Seat Frame (G) using 4 Allen
Bolts (B) and 4 Flat Washers
(C). Tighten all bolts using Allen
Wrench (E) provided. Assembly
is now complete.
AA
B
B
C
C
D
D
B
B
C
C
D
D
G
H
I I
AA
FIGURE 3
BB
C
C
BB
C
C
BB
C
C
BB
C
C
G
K