Hillsdale Furniture URBAN QUARTERS YOUTH JR 101818-104788 User manual

To help prevent serious or fatal injuries from entrapment or falls:
• Follow the information on the warnings appearing on the upper bunk end structure
and on the carton. Do not remove warning label from bed.
• Always use the recommended size mattress or mattress support, or both, to help
prevent the likelihood of entrapment or falls.
• Use only mattress which is 74-75 inches long and 37-1/2 - 38-1/2 inches wide on
upper bunk. Ensure thickness of mattress and foundation combined does not
exceed 8 inches and that mattress surface is at least 5 inches (127 mm)
below the upper edge of guardrails.
• Do not allow children under 6 years of age to use the upper bunk.
• Prohibit more than one person on the upper bunk at all times.
• Periodically check and ensure that the guardrail, ladder, and other components are
in their proper position, free from damage, and that all connectors are tight.
• Do not allow horseplay on or under the bed and prohibit jumping on the bed.
• Always use the ladder for entering and leaving the upper bunk.
• Do not use substitute parts.
Contact the manufacturer ordealer for replacement parts.
• Use of a night light may provide added safety precaution for a child using the
upper bunk.
• Always use guardrails on both long sides of the upper bunk. If the bunk bed will be
placed next to the wall, the guardrail that runs the full length of the bed should be
placed against the wall to prevent entrapment between the bed and wall.
• The use of water or sleep flotation mattresses is prohibited.
• STRANGULATON HAZARD - Never attach or hang items to any part of the bunk bed
that are not designed for use with the bed; for example: but not limited to - hooks, belts,
and jump ropes.
! IMPORTANT !
Keep these instructions for future reference.

AA
Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that all
components are in proper position, tight and free from damage. Keep this assembly instruction for future reference. Adult assembly is required.
The product of Hillsdale Furniture, LLC is designed for residential use only. Customer Service Phone Number: 502-562-0000
Date: 08-19-2015
Page 1 of 3
URBAN QUARTERS YOUTH JR LOFT & SLIDE
Model #101818-104788 (1265-310) Side and Deck
Model #101817-104787 (1265-311) Guard Rails and Ladder
HARDWARE LIST
A (4) M8 x 95mm Allen Bolts
B (11) 1/4” x 2-3/4” Allen Bolts
C (16) 1/4” x 5/8” Allen Bolts
D (4) M8 Connectors
E (1) 4mm Allen Wrench
F (1) 5mm Allen Wrench
G (6) 1/4” x 1-1/4” Allen Bolts
PARTS LIST
H (1) Open End Panel
I (1) Full End Panel
J (1) Left Side Panel
K (1) Right Side Panel
L (3) Deck Panels
M (4) Left Shelf Supports
N (4) Right Shelf Supports
O (1) Left Frame Support
P (1) Right Frame Support
Q (1) Left Shelf Wall
R (1) Right Shelf Wall
S (2) Left Shelves
T (2) Right Shelves
CARE & MAINTENANCE : The touch ofa soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
as they may cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely tightened.
HDFBP
QTYPART
16C
1E
HARDWARE QTYPART HARDWARE
4
1
D
4A 11B
F
6G
AA
AA
AA
O
P
H
I
DD
DD
D
D
STEP 1 - Figure 1
Begin assembly by inserting Frame Supports (O & P) down into slots
on Open End Panel (H) and Full End Panel (I). Insert Connectors (D)
into sides of Frame Supports (O & P) and secure from end panels with
Allen Bolts (A). Tighten bolts with Allen Wrench (F) provided.
FIGURE 1
DD

Date: 08-19-2015
Page 2 of 3
CARE & MAINTENANCE : The touch ofa soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
as they may cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely tightened.
FIGURE 2
FIGURE 3
H
I
CC
CC
CC
CC CC
CC
CC
CC
CC
CC
CC
CC
BB
BB
BB
O
Q
P
R
M
M
M
M
N
N
STEP 2 - Figure 2
Next attach Left and Right
Shelf Walls (Q & R) in
between Left and Right
Support Frames (O & P)
using 1 Allen Bolt (B) from
each end.
STEP 3 - Figure 2
Attach Left and Right Shelf
Supports (M & N) in between
End Panels (H & I) and Shelf
Walls (Q & R) using 2 Allen
Bolts (C) per support. Tighten
all bolts from steps 2 and 3
with Allen Wrench (E).
STEP 4 - Figure 3
Insert Left and Right Shelves
(S & T) down on to Shelf
Supports (M & N).
S
S
T
T
M
M
N
N
URBAN QUARTERS YOUTH JR LOFT & SLIDE
Model #101818-104788 (1265-310) Side and Deck
Model #101817-104787 (1265-311) Guard Rails and Ladder

Date: 08-19-2015
Page 3 of 3
CARE & MAINTENANCE : The touch ofa soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
as they may cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely tightened.
STEP 5 - Figure 4
Insert Deck Panels (L) down in bewtween Left and Right Frame
Supports (O & P) and secure each with 2 Allen Bolts (G). Tigthen
bolts with Allen Wrench (E) provided.
STEP 6 - Figure 5
Attach Left Side Panel
(J) to End Panels (H & I)
using 1 Allen Bolt (B) per
side and to Left Frame
Support (O) using 2 Allen
Bolts (B) from
underneath. Attach Right
Side Panel (K) to Open
End Panel (H) with 1
Allen Bolt (B) and to Right
Frame Support (P) using 2 Allen
Bolts (B) from underneath. Tighten all
bolts with Allen Wrench (E) provided. The
assembly is now complete.
BB
BB
BB
BB
BB
FIGURE 4
FIGURE 5
P
O
LLL
I
H
K
J
P
GG
GG
GG
GG
GG
GG
URBAN QUARTERS YOUTH JR LOFT & SLIDE
Model #101818-104788 (1265-310) Side and Deck
Model #101817-104787 (1265-311) Guard Rails and Ladder

Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that all
components are in proper position, tight and free from damage. Keep this assembly instruction for future reference. Adult assembly is required.
The product of Hillsdale Furniture, LLC is designed for residential use only. Customer Service Phone Number: 502-562-0000
Date: 08-09-2016
Page 1 of 1
URBAN QUARTERS YOUTH JR LOFT & SLIDE
Model #101819-104789 (1265-314) Optional Slide
HARDWARE LIST
A (10) 1/4” x 1-1/4” Allen Bolts
B (1) 1/4” x 5/8” Allen Bolt
C (1) Flat Washer
D (1) 4mm Allen Wrench
PARTS LIST
E (1) Slide
F (2) Sides (Left & Right)
G (1) Stretcher
CARE & MAINTENANCE : The touch ofa soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
as they may cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely tightened.
HDFBP
QTYPART HARDWARE QTYPART HARDWARE
10A 1B
STEP 1 - Figure 1
Begin assembly by attaching
Sides (F) to Slide (E) using 4 Allen
Bolts (A) per side. Attach
Stretcher (G) in between Sides (F)
using 1 Allen Bolt (A) per side.
Tighten all bolts using Allen
Wrench (D) provided.
STEP 2 - Figure 2
Attach Slide (E) to upper bunk of
bed by inserting peg into hole.
Secure with Allen Bolt (B) and Flat
Washer (C). The assembly is
complete.
1D
1C
AA
A
A
A
A
A
A
AA
A
A
AA
AA
A
A
A
A
G
E
F
F L
R
FIGURE 1
E
FIGURE 2
BB
C
C