Hillsdale Furniture 1825-574 Queen User manual

CARE & MAINTENANCE : The touch ofa soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
as they may cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely tightened.
Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that all
components are in proper position, tight and free from damage. Keep this assembly instruction for future reference. Adult assembly is required.
The product of Hillsdale Furniture, LLC is designed for residential use only. Customer Service Phone Number: 502-562-0000
Date: 07-08-2015
Page 1 of 2
BELIZE HEADBOARD / FOOTBOARD
Model #1825-574 / 1825-584 Queen
Model #1825-674 / 1825-684 King
HDFBP
QTYPART
14A
20C
2E
HARDWARE QTYPART HARDWARE
16
4
B
1D
F
1G
HARDWARE LIST
A (14) M8x50 Allen Bolts
B (16) Ф8 Spring Washers
C (20) Ф8 Flat Washers
D (1) Ø5 Allen Wrench
E (2) M8x100 Allen Bolts
F (4) Nuts
G (1) Open Wrench
PARTS LIST
H (1) Headboard
I (2) Headboard Legs
J (1) Footboard
K (2) Footboard Feet
STEP 1 - Figure 1
Begin assembly by attaching the Headboard Legs (I) to the bottom of each side of the Headboard (H)
using 6 Allen Bolts (A), 6 Spring Washers (B) and 6 Flat Washers (C). Tighten all bolts using the Allen
Wrench (D) provided.
STEP 2 - Figure 2
Next attach the Wooden Feet (K)
to the Footboard (J) using 2 Allen
Bolts (A), 2 Spring Washers (B)
and 2 Flat Washers (C). See
Figure 2. Tighten all bolts
using the Allen Wrench (D)
provided.
FIGURE 1
AA
B
B
B
B
C
C
C
C
E
E
B
B
C
C
E
E
FIGURE 2
H
I
I
I
K
K
J
H

BELIZE HEADBOARD / FOOTBOARD
Model #1825-574 / 1825-584 Queen
Model #1825-674 / 1825-684 King
Date: 07-08-2015
Page 2 of 2
H
FF
J
CC
C
C
C
C
B
B
B
B
AA
A
A
B
B
B
B
C
C
C
C
FIGURE 4
STEP 3 - Figure 3
Attach Headboard (H) to rails (sold separately) using 2 Allen Bolts (A), 2 Spring Washers (B) and 2
Flat Washers (C) from the inside per side and 2 Flat Washers (C) and 2 Nuts (F) from the outside
per side. Tighten all bolts with Allen Wrench (D) provided. Tighten nuts with Open Wrench (G)
provided.
STEP 4 - Figure 4
Attach Footboard (J) to rails (sold separately) using 2 Allen Bolts (A), 2 Spring Washers (B) and 2
Flat Washers (C) per side. Tighten all bolts with Allen Wrench (D) provided.
FIGURE 3
AA
A
A
CARE & MAINTENANCE : The touch ofa soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
as they may cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely tightened.
H
J