Hillsdale Furniture STACI 1525-010 User manual

STEP 1
Begin assembly by attaching
ONE Side Panel (H) to the Back
Panel (G) by inserting each
Wood Dowel (E) and aligning
with the open holes to set in
place. Once in place, secure
from the outside using 2 Allen
Bolts (B) per each side. Place
Lock Washer (C) into the whole
at the side with the curved side
in. Tighten all bolts using the
Allen Wrench (F) that has been
provided.
STEP 2
Next attach both Mattress Rails
(J) to the SAME Side Panel (H)
using 2 Allen Bolts (A) from the
outside to secure in place.
Tighten all bolts.
HARDWARE LIST
(4) Allen Bolts 1/4” x 3”
(4) Allen Bolts 1/4” x 2
3
/
8
”
(4) Lock Washers
1
/
4
”
(6) Wood Screws 35mm
(12) Wood Pins 50mm
(1) Allen Wrench 4mm
A
B
C
D
E
F
PARTS LIST
(1) Back Panel
(2) Side Panels
(2) Mattress Rails
(1) Mattress Slats
G
H
J
K
STACI DAYBED
Model #1525-010 / 1526-010 / 1572-010 -Carton A
Model #1525-020 / 1526-020 / 1572-020 -Carton B
Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that all
components are in proper position, tight and free from damage. Keep this assembly instruction for future reference. Adult assembly is required.
The product of Hillsdale Furniture, LLC is designed for residential use only. Customer Service Phone Number: 502-562-0000
Date: 11-08-2013
Page 1 of 1
CARE & MAINTENANCE : The touch ofa soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
as they may cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely tightened.
STEP 3
Repeat Steps 1 and 2 to
assemble the REMAINING Side
Panel (H) to the components
illustrated above.
STEP 4
Attach the Mattress Slats (K) to
the inside of each Mattress Rail
(J) by unrolling the slats and
setting in place. Once in place
secure to the support bar with 6
Wood Screws (D) to secure in
place. See next page for
Trundle assembly instructions.
D
AB F
G
E
C
C
E
E
E
E
E
E
E
E
D
D
D
D
D
C
C E
H
J
K
J
J
H
H
H
G
A
A
B
B

G
G
GG
HARDWARE LIST
(8) Allen Bolts
1
/
4
” x 2
3
/
8
”
(4) Screws
1
/
4
x 1
1
/
4
”
(8) Screws 35mm
(4) Wood Knobs
(6) Metal Casters
(1) Allen Wrench 4mm
(24) Allen Bolts
1
/
4
” x 2”
A
B
C
D
E
F
G
PARTS LIST
(1) Front Panel
(2) Side Panels
(1) Rear Panel
(6) Wheel Blocks
(2) Slat Sets
H
J
K
L
M
STEP 2
To assemble the Trundle, attach each Trundle Side Panel (J) to the inside of the Front Panel (H) by aligning
holes and securing with 2 Allen Bolts (A) per each corner. Tighten all bolts using the Allen Wrench (F) that has
been provided.
STEP 3
Next attach the Trundle Back Panel (K) to each Trundle Side Panel (J) by aligning the holes and securing with
2 Allen Bolts (A) per each corner. Tighten all bolts.
STEP 4
Attach each Wheel Block (L) to the inside of each Front & Rear Panels (H & K) by aligning each in place and
securing with 4 Allen Bolts (G). Tighten all bolts. Attach each Metal Caster (E) to the bottom of each block by
screwing in place.
A B C F
ED
STEP 5
Finally attach the
Slat Sets (M) to
the inside of the
Trundle unit (now
assembled) using
8 Wood Screws
(C) to secure in
place. Tighten all
screws. The
assembly is now
complete.
C
C
C
C
STACI TRUNDLE
Model #1525-030 / 1526-030 / 1572-030 -Carton C
L
H
JK
J
B
B
B
B
A
A
A
A
A
A
A
A
M
STEP 1
Attach each Wood Knob (D) to the Front Panel (H) by aligning
holes and securing from the backside with 1 Screw (B) per each.
D
D
D
D
E
G
Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that all
components are in proper position, tight and free from damage. Keep this assembly instruction for future reference. Adult assembly is required.
The product of Hillsdale Furniture, LLC is designed for residential use only. Customer Service Phone Number: 502-562-0000
Date: 11-08-2013
Page 1 of 1
CARE & MAINTENANCE : The touch ofa soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
as they may cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely tightened.