Hisense K600HK3D series User manual

K600HK3D series
RSAG2.025.4136SS
条形码定位框，长 ３５ｍｍ，高度请根
据长度等比例缩放。该定位框不做印
刷处理。物料号：
English
USER MANUAL
Before using the TV, Please read this manual
thoroughly, retain it for future reference.

I
Preface
Dear Hisense Customer,
We appreciate for your buying Hisense products, and believe that this wholly new product can bring you
innite pleasure. Before using the TV, Please read this manual thoroughly, retain it for future reference.
Our company does not assume any liability for any accident arising from violation of the matters of
attention and instruction on use in this manual.
Ｔｈｉｓ ｐｒｏｄｕｃｔ ｉｎｖｏｌｖｅｓ ｈｉｇｈ ｖｏｌｔａｇｅ． Ｔｈｅ ｕｓｅｒ ｍａｙ ｎｏｔ ｏｐｅｎ ｔｈｅ ｃａｂｉｎｅｔ ｗｉｔｈｏｕｔ ａｕｔｈｏｒｉｚａｔｉｏｎ． Ａｎｙ
ｐｅｒｓｏｎ ｏｔｈｅｒ ｔｈａｎ ｔｈｅ ｒｅｐａｉｒｅｒ ｍａｙ ｎｏｔ ｒｅｐａｉｒ ａｎｄ ｒｅｐｌａｃｅ ｐａｒｔｓ ｗｉｔｈｏｕｔ ａｕｔｈｏｒｉｚａｔｉｏｎ ｔｏ ａｖｏｉｄ ｓｈｏｃｋ
ａｎｄ ｆｉｒｅ ａｃｃｉｄｅｎｔｓ．
Ｐｌｅａｓｅ ｃｌｅａｎ ａｎｄ ｍａｉｎｔａｉｎ ｔｈｅ ｅｎｔｉｒｅ ＴＶ ｓｅｔ ｗｉｔｈ ｃｌｅａｎ ａｎｄ ｓｏｆｔ ｃｏｔｔｏｎ ｃｌｏｔｈｓ， ａｎｄ ｒｅｐｅａｔｅｄ ｆｏｒｃｉｂｌｅ
ｃｌｅａｎｉｎｇｓ ａｒｅ ｐｒｏｈｉｂｉｔｅｄ．
Ｔｈｅ ｓｃｒｅｅｎ ｍａｙ ｎｏｔ ｂｅ ｓｃｒｉｂｅｄ， ｔａｐｐｅｄ， ｉｍｐａｃｔｅｄ ｗｉｔｈ ｈａｒｄ ｏｂｊｅｃｔｓ ｏｒ ｒｕｂｂｅｄ ｗｉｔｈ ａｎｙ ｇｒｉｎｄｉｎｇ
ｍａｔｅｒｉａｌｓ．
Ｄｕｒｉｎｇ ｐｌａｃｅｍｅｎｔ ａｎｄ ｕｓｅ， ｔｈｅ ｐｒｏｄｕｃｔ ｓｈｏｕｌｄ ｂｅ ｋｅｐｔ ｆｒｏｍ ｗａｔｅｒ ｄｒｏｐｌｅｔ ａｎｄ ｓｐｌａｓｈ． Ｉｎ ｃａｓｅ ｏｆ
ａｄｖｅｒｓｅ ｗｅａｔｈｅｒ ｅ．ｇ． ｔｈｕｎｄｅｒｓｔｏｒｍ， ｔｈｅ ｐｏｗｅｒ ｐｌｕｇ ａｎｄ ｃａｂｌｅ ＴＶ （ｏｒ ｏｕｔｄｏｏｒ ａｎｔｅｎｎａ） ｐｌｕｇ ｓｈａｌｌ ｂｅ
ｒａｐｉｄｌｙ ｐｕｌｌｅｄ ｏｆｆ ｔｏ ａｖｏｉｄ ｄａｍａｇｅ ｄｕｅ ｔｏ ｌｉｇｈｔｎｉｎｇ ｓｔｒｉｋｅ．
The TV set is a Type II equipment, and used without requiring grounding.
Attention:
Ｓｔｉｌｌ ｉｍａｇｅｓ ｃａｎ ｒｅｓｕｌｔ ｉｎ ｐｅｒｍａｎｅｎｔ ｄａｍａｇｅ ｔｏ ＴＶ ｓｃｒｅｅｎ．
１． Ｔｈｅ ｔｉｍｅ ｆｏｒ ｄｉｓｐｌａｙｉｎｇ ｓｔａｔｉｃ ｉｍａｇｅｓ ｏｎ ｔｈｅ ＬＣＤ ＴＶ ｓｃｒｅｅｎ ｍａｙ ｎｏｔ ｅｘｃｅｅｄ ２ ｈｏｕｒｓ， ｏｔｈｅｒｗｉｓｅ ｉｔ ｗｉｌｌ ｒｅｓｕｌｔ
ｉｎ ｒｅｓｉｄｕａｌ ｉｍａｇｅ ｏｎ ｔｈｅ ｓｃｒｅｅｎ． Ｔｏ ａｖｏｉｄ ｔｈｉｓ， ｙｏｕ ｎｅｅｄ ｔｏ ｌｏｗｅｒ ｔｈｅ ｓｃｒｅｅｎ ｂｒｉｇｈｔｎｅｓｓ ａｎｄ ｃｏｎｔｒａｓｔ ｗｈｅｎ
ｄｉｓｐｌａｙｉｎｇ ｔｈｅ ｓｔｉｌｌ ｉｍａｇｅｓ．
２． Ｗｈｅｎ ｖｉｅｗｉｎｇ ４：３ ｆｏｒｍａｔ ｐｒｏｇｒａｍ ｏｖｅｒ ｌｏｎｇ ｔｉｍｅ， ｄｉｆｆｅｒｅｎｔ ｔｒａｃｅｓ ｗｉｌｌ ｂｅ ｌｅｆｔ ｏｎ ｔｈｅ ｌｅｆｔ ａｎｄ ｒｉｇｈｔ ｓｉｄｅｓ ｏｆ
ｔｈｅ ｓｃｒｅｅｎ ａｎｄ ｔｈｅ ｅｄｇｅ ｏｆ ｍａｒｇｉｎ． Ｓｏ ｔｈｅ ｕｓｅｒ ｉｓ ａｄｖｉｓｅｄ ｎｏｔ ｔｏ ｕｓｅ ｓｕｃｈ ｐａｔｔｅｒｎ ｏｖｅｒ ｌｏｎｇ ｔｉｍｅ．
３． Ｌｏｎｇ－ｔｉｍｅ ｄｉｓｐｌａｙ ｏｆ ｅｌｅｃｔｒｏｎｉｃ ｇａｍｅｓ ａｎｄ ｃｏｍｐｕｔｅｒ ｓｔａｔｉｃ ｉｍａｇｅｓ ｍａｙ ｒｅｓｕｌｔ ｉｎ ｌｏｃａｌ ｒｅｓｉｄｕａｌ ｉｍａｇｅ， ａｎｄ
ｔｈｅ ｓｃｒｅｅｎ ｍａｙ ｇｅｔ ｂｕｒｎｔ ａｎｄ ｒｅｓｕｌｔ ｉｎ ｒｅｓｉｄｕａｌ ｉｍａｇｅ ｏｎ ｔｈｅ ｓｃｒｅｅｎ． Ｔｏ ａｖｏｉｄ ｔｈｉｓ， ｙｏｕ ｎｅｅｄ ｔｏ ｌｏｗｅｒ ｔｈｅ
ｓｃｒｅｅｎ ｂｒｉｇｈｔｎｅｓｓ ａｎｄ ｃｏｎｔｒａｓｔ ｄｕｒｉｎｇ ｕｓｅ．
For any image residual shadow, local residual image and trace problems with the TV screen due to the
said reasons, the display screen is not within the range of warranty.
Tips for energy saving:
１． Ｐｌｅａｓｅ ｃｈｏｏｓｅ ＡＣ ｐｏｗｅｒ ｏｆｆ （ｔｕｒｎ ｏｆｆ ｔｈｅ ＴＶ ｔｈｒｏｕｇｈ ｔｈｅ ｐｏｗｅｒ ｓｗｉｔｃｈ） ｗｈｅｎ ｎｏｔ ｖｉｅｗｉｎｇ ＴＶ ｐｒｏｇｒａｍ ｔｏ
ｍｉｎｉｍｉｚｅ ｅｎｅｒｇｙ ｃｏｎｓｕｍｐｔｉｏｎ．
２． Ｕｎｄｅｒ ｃｏｎｄｉｔｉｏｎ ｔｈａｔ ｔｈｅ ｖｉｅｗ ｑｕａｌｉｔｙ ｉｓ ｎｏｔ ｉｍｐａｃｔｅｄ， ｒｅｄｕｃｅ ｔｈｅ ｂｒｉｇｈｔｎｅｓｓ ｏｆ ｄｉｓｐｌａｙ ｓｃｒｅｅｎ ｔｏ ｍｉｎｉｍｉｚｅ
ｔｈｅ ｅｎｅｒｇｙ ｃｏｎｓｕｍｐｔｉｏｎ ｏｆ ＴＶ ｄｕｒｉｎｇ ｕｓｅ．
Check the Symbol
Ｔｒｉａｎｇｌｅ ｅｎｃｌｏｓｉｎｇ ａ ｌｉｇｈｔｎｉｎｇ ａｒｒｏｗ ｉｓ ａ ｗａｒｎｉｎｇ ｓｙｍｂｏｌ，
ｒｅｍｉｎｄｉｎｇ ｙｏｕ ｏｆ ｔｈｅ ｈｉｇｈ ｖｏｌｔａｇｅ ｄａｎｇｅｒ ｉｎ ｔｈｅ ｐｒｏｄｕｃｔ． √Ｔｈｅ ｃｏｒｒｅｃｔ ｗａｙ．
Ｔｒｉａｎｇｌｅ ｅｎｃｌｏｓｉｎｇ ａｎ ｅｘｃｌａｍａｔｉｏｎ ｍａｒｋ ｉｓ ａ ｗａｒｎｉｎｇ ｓｙｍｂｏｌ，
ｒｅｍｉｎｄｉｎｇ ｙｏｕ ｏｆ ｔｈｅ ｉｍｐｏｒｔａｎｔ ｎｏｔｅｓ ｒｅｌａｔｅｄ ｔｏ ｔｈｅ ｐｒｏｄｕｃｔ． ×Ｔｈｅ ｗｒｏｎｇ ｗａｙ．
Ｇｅｎｅｒａｌ ｎｏｔｅｓ． －＞ Ｎｅｘｔ ｓｔｅｐ．

II
3D Display
Ａｐｐｌｙ ｌａｔｅｓｔ ３Ｄ ｐｒｏｃｅｓｓ ｔｅｃｈｎｏｌｏｇｙ ａｎｄ ｎｅｗ ３Ｄ ｄｉｓｐｌａｙ ｔｅｃｈｎｏｌｏｇｙ，ｇｉｖｉｎｇ ｙｏｕ ｕｌｔｒａ－ｃｏｍｆｏｒｔａｂｌｅ ３Ｄ ｖｉｓｕａｌ
ｅｎｊｏｙｍｅｎｔ．
Cloud Share
Ａｐｐｌｙ ｃｌｏｕｄ ｔｅｃｈｎｏｌｏｇｙ， ｏｗｎ ｃｌｏｕｄ ｂａｃｋｇｒｏｕｎｄ ｒｅｓｏｕｒｃｅ， ｓｈａｒｅ ｐｌａｔｆｏｒｍ ａｎｄ ｒｉｃｈ ａｐｐｌｉｃａｔｉｏｎ， ｐｒｏｖｉｄｅ ｅａｃｈ
Ｈｉｓｅｎｓｅ ＴＶ ｕｓｅｒ ｗｉｔｈ ｇｒｅａｔ Ｉｎｔｅｒｎｅｔ ｖｉｄｅｏ ｒｅｓｏｕｒｃｅ， ａｎｄ ｍａｋｅ ｉｔ ｅａｓｙ ｔｏ ｓｈａｒｅ ａｎｄ ｂｒｏａｄｃａｓｔ ｕｓｅｒ ｓｉｄｅ．
Smart Operating System
3D Play
Ｔｈｅ ｄｅｖｉｃｅ ｈａｓ ３Ｄ ｐｌａｙ ｆｕｎｃｔｉｏｎ， ｉｔ ｃａｎ ｐｒｏｖｉｄｅ ｗｉｔｈ ｖｉｒｔｕａｌ ａｎｄ ｐｅｒｆｅｃｔ ３Ｄ ｓｃｅｎｅｓ， ｒｅｐｒｏｄｕｃｉｎｇ ｓｈｏｃｋｉｎｇ ｐｒｅｓｅｎｃｅ
ｅｘｐｅｒｉｅｎｃｅｓ．
2D/3D Compatible Display
Ｕｓｅ ｍｅｎｕ ｔｏ ｔｕｒｎ ｏｎ ｏｒ ｔｕｒｎ ｏｆｆ ３Ｄ ｆｕｎｃｔｉｏｎ， ｓｗｉｔｃｈ ｂｅｔｗｅｅｎ ２Ｄ ａｎｄ ３Ｄ ｆｒｅｅｌｙ．
High Quality LED Backlight 3D Liquid Screen
Ｎｅｗ ｇｅｎｅｒａｔｉｏｎ ｂａｃｋｌｉｇｈｔ ｓｏｕｒｃｅ ｗｉｔｈ ｔｈｅ ４ ｃｕｔｔｉｎｇ ｅｄｇｅｓ ｏｆ ｍａｇｎｉｆｉｃｅｎｃｅ，ｅｎｅｒｇｙ ｓａｖｉｎｇ， ｅｎｖｉｒｏｎｍｅｎｔ ｐｒｏｔｅｃｔｉｏｎ
ａｎｄ ｓｌｉｍｎｅｓｓ．
Built-in WiFi wireless network function
Ｃａｐａｂｌｅ ｔｏ ｃｏｎｎｅｃｔ ｔｏ ｗｉｒｅｌｅｓｓ ｒｏｕｔｅｒ ｄｉｒｅｃｔｌｙ ｆｏｒ ｓｕｒｆｉｎｇ ｏｎ Ｉｎｔｅｒｎｅｔ．
PC to TV
Ｃａｐａｂｌｅ ｔｏ ｉｎｔｅｒｃｏｎｎｅｃｔ ｂｅｔｗｅｅｎ ＴＶ ａｎｄ ｍｏｂｉｌｅ， Ｈｉｓｅｎｓｅ Ｉ＇ＴＶ， ｍｅｅｔ ｆａｍｉｌｙ ｅｎｔｅｒｔａｉｎｍｅｎｔ ｓｈａｒｉｎｇ ｎｅｅｄｓ．
Great Application
Ｔｈｅ ｄｅｖｉｃｅ ｃａｒｒｉｅｓ Ｈｉｍａｒｋｅｔ， ｐｒｏｖｉｄｅ ｍａｇｎｉｔｕｄｅ Ａｐｐｓ ｆｏｒ ｕｓｅｒｓ ｔｏ ｄｏｗｎｌｏａｄ．
SRS TruSurround HD Sound Effect
Ｍａｋｅ ＴＶ ａｕｄｉｏ ｍｏｒｅ ｒｅａｌ ａｎｄ ｍｏｒｅ ｓｈｏｃｋｉｎｇ．
Multi-Mode Widescreen Display
Ｐｒｏｖｉｄｅ ｗｉｔｈ ｍｕｌｔｉｐｌｅ ａｓｐｅｃｔ ｒａｔｉｏ ｃｈｏｉｃｅ： Ｆｕｌｌ Ｓｃｒｅｅｎ， Ｓｔａｎｄａｒｄ， Ｚｏｏｍ１， Ｚｏｏｍ２， Ｓｍａｒｔ Ｚｏｏｍ， Ｄｏｔ Ｔｏ Ｄｏｔ．
Power Saving Mode
Ｔｈｅ ｄｅｖｉｃｅ ｗｉｌｌ ｅｎｔｅｒ ｓｌｅｅｐ ｏｒ ｓｔａｎｄｂｙ ｍｏｄｅ ａｆｔｅｒ ｔｈｅｒｅ ｉｓ ｎｏ ｉｎｐｕｔ ｓｉｇｎａｌ １５ ｍｉｎｕｔｅｓ ｌａｔｅｒ， ｔｈｕｓ ｅｘｔｅｎｄｉｎｇ ｔｈｅ
ｄｅｖｉｃｅ ｌｉｆｅｔｉｍｅ ａｎｄ ｓａｖｉｎｇ ｐｏｗｅｒ．
Multimedia Port
Ｔｈｅｒｅ ａｒｅ ｓｅｖｅｒａｌ ｐｏｒｔｓ ｆｏｒ Ａｎｔｅｎｎａ， ＶＧＡ， ＨＤＭＩ， Ａ／Ｖ， Ｃｏｍｐｏｎｅｎｔ， ＵＳＢ， Ｈｅａｄｐｈｏｎｅ， Ｅｔｈｅｒｎｅｔ ａｎｄ ＴＦ ｃａｒｄ．
is trademarks registered by SRS Labs,Inc..SRS Labs,Inc.have approved the product to apply
TruSurround HD technology.
Characteristics
Special Statement: (This statement is applicable throughout this user manual)
Ｔｈｅ ｐｉｃｔｕｒｅｓ ａｎｄ ｉｎｓｔｒｕｃｔｉｏｎｓ ｉｎ ｔｈｅ ｕｓｅｒ ｍａｎｕａｌ ａｒｅ ｏｎｌｙ ｆｏｒ ｒｅｆｅｒｅｎｃｅ， ａｎｄ ｍａｙ ｂｅ ｄｉｆｆｅｒｅｎｔ ｆｒｏｍ ａｐｐｅａｒａｎｃｅ ｏｆ
ａｃｔｕａｌ ｐｒｏｄｕｃｔｓ． Ｐｌｅａｓｅ ｍａｋｅ ｔｈｅ ｏｂｊｅｃｔ ａｓ ｔｈｅ ｓｔａｎｄａｒｄ．
Ａｎｙ ｃｈａｎｇｅ ｔｏ ｑｕａｌｉｔｙ ｕｐｇｒａｄｅ， ｐｒｏｄｕｃｔ ｄｅｓｉｇｎ ａｎｄ ｓｐｅｃｉｆｉｃａｔｉｏｎ ｗｉｌｌ ｎｏｔ ｂｅ ｓｕｂｊｅｃｔ ｔｏ ａｎｙ ｐｒｉｏｒ ｎｏｔｉｃｅ．
Ｕｓｅｒ ｍａｎｕａｌ ｉｓ ｏｎｌｙ ｐａｒｔ ｏｆ ｔｈｅ ａｐｐｌｉｃａｔｉｏｎ ｇｕｉｄａｎｃｅ ｉｎｓｔｒｕｃｔｉｏｎｓ， ａｎｄ ｏｔｈｅｒ ａｐｐｌｉｃａｔｉｏｎｓ ｃａｎ ｒｅｆｅｒ ｔｏ ｔｈｅ ｐｒｏｍｐｔ
ｉｎ ｔｈｅ ａｐｐｌｉｃａｔｉｏｎ ｉｎｓｔｒｕｃｔｉｏｎｓ．
This TV incorporates High-Denition Multimedia Interface (HDMITM) technology.
HDMI, the HDMI logo and High-Denition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

III
Below is the list of video format compatible:
Specifications
Model LHD32K600HK3D LTDN39K600HK3D LTDN48K600HK3D
Dimension
(W × H × D) (mm)
Without stand
７３０×４２８．６×６１．６ ８８２×５１０×６１ １０８４×６２７×５２
With stand
７３０×４８１．５×１９８ ８８２×５６３×２１０ １０８４×６８５×２４０
Weight (kg) Without stand
６．３ １０．８ １６．５
With stand
８．２ １３ ２０
LCD Panel
Minimum size (Diagonal)
８０ ９８ １２１
Screen resolution
１３６６×７６８ １９２０×１０８０ １９２０×１０８０
Power supply
～ ５０／６０Ｈｚ １６０－２４０Ｖ ～ ５０／６０Ｈｚ １６０－２４０Ｖ ～ ５０／６０Ｈｚ １６０－２４０Ｖ
Power consumption
５５Ｗ ７４Ｗ １００Ｗ
Audio power
６Ｗ＋６Ｗ ７Ｗ＋７Ｗ ８Ｗ＋８Ｗ
Standard Ｑ／０２０２ＲＳＲ ５９１－２０１１
Receiving
systems
RF ＰＡＬ／Ｉ， ＤＴＭＢ
AV ＰＡＬ， ＮＴＳＣ
Channel range Ｃ１ ～ Ｃ５７ Ｚ１ ～ Ｚ３５
Environmental conditions Ｔｅｍｐｅｒａｔｕｒｅ ５℃～ ３５℃ Ｈｕｍｉｄｉｔｙ ２０％ ～ ８０％ＲＨ Ａｔｍｏｓｐｈｅｒｉｃ ｐｒｅｓｓｕｒｅ ８６ｋＰａ ～ １０６ｋＰａ
Antenna input ７５Ω
DTV specication Ｆｒｅｑｕｅｎｃｙ： ４７４ＭＨｚ－８７４ＭＨｚ Ｔｒａｎｓｍｉｓｓｉｏｎ ｃｈａｎｎｅｌ ｂａｎｄｗｉｄｔｈ： ８ＭＨｚ Ｍｏｄｕｌａｔｉｏｎ：
６４ＱＡＭ， １６ＱＡＭ, ４ＱＡＭ Ｆｒａｍｅ Ｈｅａｄｅｒ： Ｐｎ９４５ Ｓｙｍｂｏｌ Ｉｎｔｅｒｌｅａｖｉｎｇ： ７２０ Ｃｏｄｅ Ｒａｔｅ：
０．４， ０．６ Ｖｉｄｅｏ ｄｅｃｏｄｅ Ｆｏｒｍａｔ： Ｈ．２６４， ＭＰＥＧ－２ Ａｕｄｉｏ ｄｅｃｏｄｅ Ｆｏｒｍａｔ： ＭＰＥＧ－１， ＡＣ－３
Analogue Tune ＶＨＦ－Ｌ：４８．２５ ～ １６８．２５ＭＨｚ ＶＨＦ－Ｈ：１７５．２５ ～ ４６３．２５ＭＨｚ ＵＨＦ：４７１．２５ ～ ８６３．２５ＭＨｚ
Component Input ４８０ｉ， ４８０ｐ， ５７６ｉ， ５７６ｐ
７２０ｐ／６０Ｈｚ， １０８０ｉ／５０Ｈｚ， １０８０ｉ／６０Ｈｚ， １０８０ｐ／５０Ｈｚ， １０８０ｐ／６０Ｈｚ
The level charactaristics of terminals:
Interface name Interface type Input signal Level Impedance
ＡＶ ｉｎｐｕｔ Ｃｏｍｐｏｓｉｔｅ ｖｉｄｅｏ Ｖｉｄｅｏ １．０Ｖｐ－ｐ ７５Ω
Ｃｏｍｐｏｎｅｎｔ ｉｎｐｕｔ Ａｎａｌｏｇｕｅ
ｃｏｍｐｏｎｅｎｔ ｖｉｄｅｏ Ｙ １．０Ｖｐ－ｐ ７５Ω
ＰＢ、ＰＲ０．７Ｖｐ－ｐ ７５Ω
ＶＧＡ Ｉｎｐｕｔ ＶＧＡ Ｒ、Ｇ、Ｂ ０．７Ｖｐ－ｐ ７５Ω
ＨＳ、ＶＳＴＴＬ Ｈｉｇｈ ｉｍｐｅｄａｎｃｅ
Ａｕｄｉｏ ｉｎｐｕｔ Ａｎａｌｏｇｕｅ ａｕｄｉｏ Ｌ、Ｒ １Ｖｒｍｓ ＞ １０ ｋΩ
NOTE
We can not promise
that this set would
support all the formats
listed above, as the
programming tools
are different.
Formats Video decoding Audio decoding
Type Resolution (max) Bit rate (max)
．ａｖｉ Ｘｖｉｄ １２８０×７２０ ８Ｍｂｐｓ ＡＣ３， ＭＰＥＧ１（Ｌａｙｅｒ１，２，３）
．ａｖｉ ．ｍｐｇ ．ｔｓ ＭＰＥＧ２ １９２０×１０８０ ２５Ｍｂｐｓ ＡＣ３， ＭＰＥＧ１（Ｌａｙｅｒ１，２，３）
．ｔｓ ．ｍｋｖ ．ａｖｉ Ｈ．２６４ １９２０×１０８０ ４０Ｍｂｐｓ ＡＣ３， ＡＡＣ， ＭＰＥＧ１（Ｌａｙｅｒ１，２，３）
．ａｖｉ ．ｍｐｇ
．ｍｏｖ ＭＰＥＧ４ ＡＳＰ １９２０×１０８０ ８Ｍｂｐｓ ＡＣ３， ＭＰＥＧ１（Ｌａｙｅｒ１，２，３）
．ｒｍ ．ｒｍｖｂ Ｒｅａｌ ８／９／１０ １２８０×７２０ １．５Ｍｂｐｓ Ｃｏｏｋｅｒ
．ｆｌｖ Ｈ．２６４ ７２０×５７６ １．０Ｍｂｐｓ ＭＰＥＧ１（Ｌａｙｅｒ１，２，３）

IV
Ｗｈｅｎ ｉｔ ｉｓ ｒａｉｎｙ， ｐｌｅａｓｅ ｐｕｌｌ ｏｕｔ ｔｈｅ ｐｏｗｅｒ ｐｌｕｇ， ＣＡＴＶ ｐｌｕｇ ｏｒ
ｏｕｔｓｉｄｅ ａｎｔｅｎｎａ ｐｌｕｇ ｔｏ ａｖｏｉｄ ａｎｙ ｐｏｓｓｉｂｌｅ ｄａｍａｇｅ ｔｏ ｔｈｅ ＴＶ
ｓｅｔ． Ｄｏ ｎｏｔ ｔｏｕｃｈ ｔｈｅ ｉｎｄｕｃｔｉｎｇ ｗｉｒｅ ｏｆ ｔｈｅ ａｎｔｅｎｎａ．
Ｉｆ ｙｏｕ ｄｏ ｎｏｔ ｕｓｅ ｔｈｅ ｐｒｏｄｕｃｔ ｆｏｒ ａ ｌｏｎｇ ｔｉｍｅ， ｐｌｅａｓｅ ｐｕｌｌ ｏｕｔ
ｔｈｅ ｐｏｗｅｒ ｐｌｕｇ．
Ｉｆ ｙｏｕ ｆｉｎｄ ａｂｎｏｒｍａｌ ｓｏｕｎｄ ｏｒ ｓｍｅｌｌ， ｏｒ ｔｈｅｒｅ ｉｓ ｓｏｕｎｄ ｂｕｔ ｎｏ
ｉｍａｇｅ， ｐｌｅａｓｅ ｔｕｒｎ ｏｆｆ ｔｈｅ ＴＶ ａｎｄ ｐｕｌｌ ｏｕｔ ｔｈｅ ｐｌｕｇ ｉｍｍｅｄｉａｔｅｌｙ
ａｎｄ ｃｏｎｔａｃｔ ｔｈｅ ｐｒｏｆｅｓｓｉｏｎａｌ ｔｅｃｈｎｉｃｉａｎｓ．
Ｐｌｅａｓｅ ｄｏ ｎｏｔ ｐｒｅｓｓ ｔｈｅ ｐｏｗｅｒ ｌｉｎｅ ａｎｄ ｓｉｇｎａｌ ｌｉｎｅ ｗｉｔｈ ｏｔｈｅｒ
ｔｈｉｎｇｓ．
Ｐｌｅａｓｅ ｄｏ ｎｏｔ ｍａｋｅ ｔｈｅ ｐｏｗｅｒ ｏｕｔｌｅｔ ｏｖｅｒｌｏａｄｅｄ， ｏｒ ｉｔ ｗｉｌｌ
ｒｅｓｕｌｔ ｉｎ ｔｈｅ ｄａｎｇｅｒ ｏｆ ｆｉｒｅ．
Ｋｅｅｐ ｔｈｅ ｐｏｗｅｒ ｌｉｎｅ ａｗａｙ ｆｒｏｍ ｈｉｇｈ ｔｅｍｐｅｒａｔｕｒｅ ａｎｄ ｈｅａｔｉｎｇ
ｔｈｉｎｇｓ．
Ｔｈｅｒｅ ａｒｅ ｓｏｍｅ ｃｈａｎｇｅｓ ｆｏｒ ｔｈｅ ｏｕｔｄｏｏｒ ａｎｔｅｎｎａ ｉｆ ｉｔ ｓｔａｙｓ
ｏｕｔｓｉｄｅ ｆｏｒ ａ ｌｏｎｇ ｔｉｍｅ， ｗｈｉｃｈ ｍａｙ ａｆｆｅｃｔ ｔｈｅ ｐｉｃｔｕｒｅ ｑｕａｌｉｔｙ ｏｆ
ｔｈｅ ＴＶ， ｓｏ ｐｌｅａｓｅ ｃｈｅｃｋ ｔｈｅ ａｎｔｅｎｎａ ｏｒ ｒｅｐｌａｃｅ ｉｔ ｒｅｇｕｌａｒｌｙ．
Ｄｏ ｎｏｔ ｃｌｅａｎ ｔｈｉｓ ｕｎｉｔ ｗｉｔｈ ｖｏｌａｔｉｌｅ ｏｉｌｓ ｏｒ ｄｉｌｕｔｉｏｎ， ｗｈｉｃｈ ｍａｙ
ｃａｕｓｅ ｃａｂｉｎｅｔ ｄｅｔｅｒｉｏｒａｔｉｏｎ ｏｒ ｄａｍａｇｅ ｉｔｓ ｃｏａｔｉｎｇ ｓｕｒｆａｃｅ．
Ｉｆ ｔｈｅ ｃａｂｉｎｅｔ ｂｅｃｏｍｅｓ ｄｉｒｔｙ， ｐｌｅａｓｅ ｃｌｅａｎ ｉｔ ｗｉｔｈ ａ ｓｏｆｔ ｃｌｏｔｈ
ｗｈｉｃｈ ｈａｓ ｎｅｕｔｒａｌ ｄｅｔｅｒｇｅｎｔ ｗｅｔ ｗｉｔｈ ｗａｔｅｒ．
Ｉｎ ｔｈｅ ｃａｓｅ ｗｈｅｒｅ ｓｕｃｈ ｓｕｂｓｔａｎｃｅｓ ｔｈａｔ ａｒｅ ｐａｉｎｔｅｄ ｗｉｔｈ ｐａｉｎｔ
ｏｒ ｏｒｇａｎｉｃ ｓｏｌｖｅｎｔ ａｎｄ ｇｒｅａｓｅ， ｅｔｃ． ｏｎ ｔｈｅ ｓｕｒｆａｃｅ ｏｆ ｔｈｅ ＴＶ
ｃａｂｉｎｅｔ， ｔｈｅ ｃｈｅｍｉｃａｌ ｒｅａｃｔｉｏｎ ｍａｙ ｂｅ ｏｃｃｕｒｒｅｄ ｉｎ ｂｅｔｗｅｅｎ ｔｈｅ
ｒｕｂｂｅｒ ｃｕｓｈｉｏｎ ｏｎ ｔｈｅ ｂａｓｅ ａｎｄ ｓｕｃｈ ｓｕｂｓｔａｎｃｅｓ ｈｅｒｅｉｎｂｅｆｏｒｅ，
ｗｈｉｃｈ ｍａｙ ｃａｕｓｅ ａ ｓｌｉｇｈｔ ｃｏｒｒｏｓｉｏｎ ｏｎ ｔｈｅ ｓｕｒｆａｃｅ ｏｆ ｔｈｅ ＴＶ
ｃａｂｉｎｅｔ． Ｔｈｅｒｅｆｏｒｅ， ｕｓｅｒｓ ａｒｅ ｒｅｃｏｍｍｅｎｄｅｄ ｔｏ ｆｉｒｓｔｌｙ ｐｕｔ ａ
ｌａｙｅｒ ｏｆ ｐｒｏｔｅｃｔｉｖｅ ｍａｔｅｒｉａｌ （ｓｕｃｈ ａｓ ｐｒｅｓｓｂｏａｒｄ ｏｒ ｇｌａｓｓ ｓｈｅｅｔ，
ｅｔｃ．） ｏｎ ｔｈｅ ＴＶ ｃａｂｉｎｅｔ ａｎｄ ｔｈｅｎ ｐｌａｃｅ ｔｈｅ ＴＶ ｓｅｔ．
Ｐｌｅａｓｅ ｄｏ ｎｏｔ ｔｒｙ ｔｏ ｄｅｃｏｍｐｏｓｅ ａｎｙ ｐａｒｔ ｏｆ ｔｈｅ ｐｒｏｄｕｃｔ， ｗｈｉｃｈ
ｍａｙ ｃａｕｓｅ ｄａｍａｇｅ ｔｏ ｔｈｅ ｐｒｏｄｕｃｔ ａｓ ｗｅｌｌ ａｓ ｈａｒｍ ｔｏ ｔｈｅ
ｈｕｍａｎ． Ａｎｄ ｉｔ ｗｉｌｌ ａｌｓｏ ｍａｋｅ ｙｏｕ ｆａｃｅ ｔｈｅ ｐｒｏｄｕｃｔ ｗａｒｒａｎｔｙ
ｆａｉｌｕｒｅ．
Ｐｌｅａｓｅ ｄｏ ｎｏｔ ｒｅｍｏｖｅ ｔｈｅ ｂａｃｋ ｃｏｖｅｒ． Ｔｈｅ ａｄｊｕｓｔ ａｎｄ ｃｈｅｃｋ
ｉｎｓｉｄｅ ｔｈｅ ｕｎｉｔ ｓｈｏｕｌｄ ｏｎｌｙ ｂｅ ｃａｒｒｉｅｄ ｏｕｔ ｂｙ ｔｈｅ ｐｒｏｆｅｓｓｉｏｎａｌ
ｔｅｃｈｎｉｃｉａｎｓ．
Ｐｌｅａｓｅ ｄｏ ｎｏｔ ｃｏｖｅｒ ｏｒ ｂｌｏｃｋ ｔｈｅ ｈｅａｔ－ｒａｄｉａｔｉｎｇ ｈｏｌｅｓ ｉｎ ｏｒｄｅｒ
ｎｏｔ ｔｏ ｈａｍｐｅｒ ｔｈｅ ｕｎｉｔ ｔｏ ｇｉｖｅ ｏｆｆ ｈｅａｔ．
Ｐｌｅａｓｅ ｄｏ ｎｏｔ ｓｔｉｃｋ ｔｈｅ ｓｈａｒｐ ｏｂｊｅｃｔｓ， ｍｅｔａｌ， ｏｒ ｌｉｑｕｉｄ ｉｎｔｏ ｏｒ
ｕｓｅ ｔｈｅｍ ｔｏ ｔｏｕｃｈ ｔｈｅ ｓｉｇｎａｌ ｉｎｔｅｒｆａｃｅ ｏｒ ｈｅａｔ－ｒａｄｉａｔｉｎｇ ｈｏｌｅｓ
ｉｎ ｃａｓｅ ｏｆ ｓｈｏｒｔ ｃｉｒｃｕｉｔ ｏｒ ｄａｍａｇｅ ｔｏ ｔｈｅ ｐｒｏｄｕｃｔ．
Ｗａｔｃｈ ＴＶ ａｔ ａ ｐｒｏｐｅｒ ｄｉｓｔａｎｃｅ， ａｎｄ ｔｈｅ ｂｅｓｔ ｄｉｓｔａｎｃｅ ｉｓ ３
ｔｏ ４ ｔｉｍｅｓ ｔｈｅ ｌｅｎｇｔｈ ｏｆ ｔｈｅ ｖｅｒｔｉｃａｌ ｄｉｓｔａｎｃｅ ｏｆ ＬＣＤ．
Ｋｅｅｐ ｔｈｅ ｌｉｇｈｔｉｎｇ ｉｎｄｏｏｒｓ ｂｒｉｇｈｔ ｅｎｏｕｇｈ ｔｏ ｒｅａｄ ｎｅｗｓｐａｐｅｒ．
Ｔｈｅ ｖｏｌｕｍｅ ｓｈｏｕｌｄ ｂｅ ｐｒｏｐｅｒｌｙ ｓｅｔ ｉｎ ｏｒｄｅｒ ｎｏｔ ｔｏ ｄｉｓｔｕｒｂ
ｙｏｕｒ ｎｅｉｇｈｂｏｒｓ， ｅｓｐ． ｗｈｅｎ ｉｔ ｉｓ ｄｕｒｉｎｇ ｔｈｅ ｎｉｇｈｔ．
Ｉｔ ｉｓ ｒｅｃｏｍｍｅｎｄｅｄ ｔｈａｔ ２ ｏｒ ｍｏｒｅ ｐｅｏｐｌｅ ｓｈｏｕｌｄ ｌｏａｄ， ｕｎｌｏａｄ
ａｎｄ ｃａｒｒｙ ｔｈｅ ｕｎｉｔ； ｔｒｙ ｔｏ ａｖｏｉｄ ａｎｙ ｃｒａｓｈ ｗｈｅｎ ｃａｒｒｙｉｎｇ ｔｈｅ
ｕｎｉｔ， ａｎｄ ｐｒｏｔｅｃｔ ｔｈｅ ＬＣＤ ｓｃｒｅｅｎ ｉｎ ｐａｒｔｉｃｕｌａｒ．
Ｉｆ ｙｏｕ ｔｏｕｃｈ ｔｈｅ ＬＣＤ ｓｃｒｅｅｎ ｗｈｅｎ ｔｕｒｎｉｎｇ ｏｎ ｏｒ ｏｆｆ ｔｈｅ ＴＶ，
ｙｏｕ ｃａｎ ｆｅｅｌ ｔｈｅ ｓｌｉｇｈｔ ｅｌｅｃｔｒｉｃ ｓｈｏｃｋ， ｗｈｉｃｈ ｉｓ ｔｈｅ ｓｏ－ｃａｌｌｅｄ
ｅｌｅｃｔｒｏｓｔａｔｉｃ ａｎｄ ｄｏｅｓ ｎｏ ｈａｒｍ ｔｏ ｙｏｕｒ ｈｅａｌｔｈ．
√Ｅｖｅｎ ａｎｄ ｓｔｅａｄｙ ｏｃｃａｓｉｏｎｓ．
× Ｐｌａｃｅｓ ｕｎｄｅｒ ｄｉｒｅｃｔ ｓｕｎｓｈｉｎｅ ｏｒ ｃｌｏｓｅ ｔｏ ｈｅａｔｉｎｇ ｄｅｖｉｃｅｓ．
× Ｐｌａｃｅｓ ｗｉｔｈ ｐｏｏｒ ｖｅｎｔｉｌａｔｉｏｎ．
× Ｐｌａｃｅｓ ｃｌｏｓｅ ｔｏ ｆｕｒｎａｃｅ ｏｒ ｐｌａｃｅｓ ｔｏ ｗｈｉｃｈ ｗａｔｅｒ， ｏｉｌ ｏｒ ｓｍｏｋｅ
ｉｓ ｅａｓｙ ｔｏ ｅｎｔｅｒ．
× Ｐｌａｃｅｓ ｗｈｅｒｅ ｖｅｎｔｉｌａｔｉｎｇ ｏｐｅｎｉｎｇｓ ａｒｅ ｃｌｏｓｅｄ．
× Ｕｎｓｔｅａｄｙ ｐｌａｃｅｓ．
× Ｐｌａｃｅｓ ｓｕｆｆｅｒｉｎｇ ｆｒｏｍ ｅａｓｙ ｖｉｂｒａｔｉｏｎ．
× Ｐｌａｃｅｓ ｏｆ ｌｏｔ ｏｆ ｄｕｓｔ ｏｒ ｍｏｉｓｔ ｐｌａｃｅｓ．
× Ｐｌａｃｅｓ ｏｆ ｈｉｇｈ ｔｅｍｐｅｒａｔｕｒｅｓ．
ＬＣＤ ｄｉｓｐｌａｙ ｐａｎｅｌ ｉｓ ｔｈｅ ａｄｖａｎｃｅｄ Ｓ＆Ｔ ｐｒｏｄｕｃｔ， ｃｏｍｐｏｓｅｄ ｏｆ
ｓｅｖｅｒａｌ ｍｉｌｌｉｏｎｓ ｏｆ Ｍｏｖｉｅ ｔｒａｎｓｉｓｔｏｒｓ ｉｎｓｉｄｅ． Ｔｈｅｒｅ ｃａｎ ｂｅ ｄａｒｋ
ｏｒ ｂｒｉｇｈｔ ｓｐｏｔｓ ａｐｐｅａｒｉｎｇ ｏｎ ｔｈｅ ｐａｎｅｌ． ｐｌｅａｓｅ ｎｏｔｅ ｔｈａｔ ｔｈｉｓ
ｉｓ ａ ｎｏｒｍａｌ ｐｈｅｎｏｍｅｎｏｎ， ｗｈｉｃｈ ｄｏｅｓ ｎｏｔ ａｆｆｅｃｔ ｔｈｅ ｏｖｅｒａｌｌ
ｐｅｒｆｏｒｍａｎｃｅ．
The incorrect maintenance will lead to damage to the LCD screen,
which will affect the image effect, so you must pay attention to the
following items:
Ｄｏｎ＇ｔ ｃｌｅａｎ ｔｈｅ ｓｃｒｅｅｎ ｗｉｔｈ ｔｈｅ ｏｒｇａｎｉｃ ｓｏｌｖｅｎｔｓ， ｓｕｃｈ ａｓ
ａｌｃｏｈｏｌ， ｇａｓｏｌｉｎｅ， ｅｔｃ． ｏｒ ｃｈｅｍｉｃａｌ ｒｅａｇｅｎｔｓ ，ｓｕｃｈ ａｓ ａｃｉｄ，
ａｌｋａｌｉ， ｅｔｃ．
Ｄｏ ｎｏｔ ｃｌｅａｎ ｔｈｅ ｓｃｒｅｅｎ ｗｉｔｈ ａｎｙ ｋｉｎｄ ｏｆ ｄｅｔｅｒｇｅｎｔ．
Ａｆｔｅｒ ｔｈｅ ＴＶ ｉｓ ｔｕｒｎｅｄ ｏｆｆ， ｙｏｕ， ｗｈｅｎ ｎｅｃｅｓｓａｒｙ， ｃａｎ ｃｌｅａｎ ｔｈｅ
ｓｃｒｅｅｎ ｗｉｔｈ ａ ｃｌｅａｎ ａｎｄ ｓｏｆｔ ｃｏｔｔｏｎ ｃｌｏｔｈ ｔｏ ｐｒｏｐｅｒｌｙ ｓａｆｅｇｕａｒｄ
ｉｔ， ｂｕｔ ｒｅｐｅａｔｅｄｌｙ ｃｌｅａｎｉｎｇ ｗｉｔｈ ｆｏｒｃｅ ｉｓ ｐｒｏｈｉｂｉｔｅｄ．
Ｐｌｅａｓｅ ｄｏ ｎｏｔ ｄｉｒｅｃｔｌｙ ｔｏｕｃｈ ｔｈｅ ｓｃｒｅｅｎ ｗｉｔｈ ｙｏｕｒ ｆｉｎｇｅｒｓ，
ｗｈｉｃｈ ｍａｙ ｄａｍａｇｅ ｔｈｅ ｓｃｒｅｅｎ ｓｕｒｆａｃｅ． Ｗｈａｔ＇ｓ ｍｏｒｅ， ｔｈｅ ｏｉｌ
ａｎｄ ｆａｔ ｏｎ ｔｈｅ ｓｃｒｅｅｎ ｉｓ ｄｉｆｆｉｃｕｌｔ ｔｏ ｒｅｍｏｖｅ．
Ｐｌｅａｓｅ ｄｏ ｎｏｔ ｐｕｔ ｐｒｅｓｓｕｒｅ ｏｎ ｔｈｅ ＬＣＤ， ｆｏｒ ｔｈｅ ＬＣＤ ｓｃｒｅｅｎ ｉｓ
ｄｅｌｉｃａｔｅ ａｎｄ ｖｕｌｎｅｒａｂｌｅ．
Ｔｈｅ ｈａｒｄ ｏｂｊｅｃｔ ｉｓ ｎｏｔ ａｌｌｏｗｅｄ ｔｏ ｔｏｕｃｈ ｔｈｅ ＬＣＤ ｓｃｒｅｅｎ， ｆｏｒ ｉｔ
ｉｓ ｅａｓｉｌｙ ｓｃｒａｔｃｈｅｄ．
Alerts: Before using the product, please read the following clauses carefully.
Product
Watching TV
Others
Power and signal
Maintenance
LCD display instruction and maintenance
Method of placement
Important Safety Instructions

1｜Ｃｏｎｔｅｎｔｓ ＵＳＥＲ ＭＡＮＵＡＬ
Contents
Getting
Started
1
Accessories List................................................................................................ 2
Installing the Stand........................................................................................... 2
Securing the Installation Space........................................................................ 3
Control Panel.................................................................................................... 4
Remote Control ................................................................................................ 5
Connections
8
TV Terminal ...................................................................................................... 8
Connecting an Antenna or Cable...................................................................... 9
Connecting an A/V Device................................................................................ 9
Ｗｉｔｈ ｔｈｅ ＨＤＭＩ Ｃａｂｌｅ ／ Ｗｉｔｈ ｔｈｅ Ｃｏｍｐｏｎｅｎｔ Ｃａｂｌｅ ／ Ｗｉｔｈ ｔｈｅ ＡＶ Ｃａｂｌｅ
Connecting a PC .............................................................................................11
Connecting a TV Monitor or VCR....................................................................11
Connecting an Ex-Speaker............................................................................. 12
Connecting a Headphone............................................................................... 12
Connecting a USB Device.............................................................................. 12
Connecting a TF card..................................................................................... 13
Selecting the Input Source ............................................................................. 13
Basic
Features
14
Using the TV for the First Time....................................................................... 14
Ｔｕｒｎｉｎｇ ｔｈｅ ＴＶ Ｏｎ ｏｒ Ｏｆｆ ／ Ｃｈａｎｇｉｎｇ ｔｈｅ Ｃｈａｎｎｅｌ ａｎｄ Ｖｏｌｕｍｅ
Using the Menu .............................................................................................. 14
Ｇｅｎｅｒａｌ ／ Ｐｉｃｔｕｒｅ ／ Ｓｏｕｎｄ ／ ３Ｄ ／ Ｃｈａｎｎｅｌ ／ Ｎｅｔｗｏｒｋ ／ Ｓｙｓｔｅｍ ／ Ａｂｏｕｔ
Advanced
Features
21
Upgrade.......................................................................................................... 21
Account........................................................................................................... 21
Using the Home Page .................................................................................... 22
Applications .................................................................................................... 22
HiMarket ......................................................................................................... 22
PC to TV ......................................................................................................... 23
Cloud • Media ................................................................................................. 23
Ｍｕｓｉｃ ／ Ｐｈｏｔｏ ／ Ｖｉｄｅｏ
Other
Information
26
Trouble Shooting ............................................................................................ 26

ＵＳＥＲ ＭＡＮＵＡＬ Ｇｅｔｔｉｎｇ Ｓｔａｒｔｅｄ ｜2
To install the base stand (32")
To install the base stand (39"/48")
Please make sure the following items are included with your TV. If any item is missing, contact your dealer.
Getting Started
Accessories List
Installing the Stand
NOTE
Install the base stand with the provided screws in the accessory bag in case of causing damage to TV.
Ｕｓｅｒ Ｍａｎｕａｌ×１ Ｗａｒｒａｎｔｙ Ｃａｒｄ×１ ３Ｄ Ｇｌａｓｓｅｓ×２ Ｒｅｍｏｔｅ Ｃｏｎｔｒｏｌ×１ Ｍｉｃｒｏ－ＵＳＢ Ｃａｂｅｌ×１
Ａｎｔｅｎｎａ Ｃａｂｌｅ×１ ＡＶ Ａｄａｐｔｅｒ×１ Ｃｏｍｐ ／ Ｖｉｄｅｏ Ａｄａｐｔｅｒ×１ Ａｕｄｉｏ Ａｄａｐｔｅｒ×１ Ｓｃｒｅｗｓ
保 修 卡
产产产产产产
M5×12
12
M5×12
3
ST4×14
Ｓｅｃｕｒｅ ｔｈｅ ｓｔａｎｄ ｃｏｌｕｍｎ ｔｏ ｔｈｅ ｂａｓｅ
ｗｉｔｈ ３ ｓｃｒｅｗｓ （４８＂ ｎｅｅｄｓ ４ ｓｃｒｅｗｓ）
ｐｒｏｖｉｄｅｄ．
Ｓｅｃｕｒｅ ｔｈｅ ｓｔａｎｄ ｃｏｖｅｒ ｔｏ ｔｈｅ ｓｔａｎｄ
ｃｏｌｕｍｎ ｖｅｒｔｉｃａｌｌｙ ｗｉｔｈ ｔｈｅ ２ ｓｃｒｅｗｓ
ｐｒｏｖｉｄｅｄ．
Ｓｅｃｕｒｅ ｔｈｅ ｓｔａｎｄ ｃｏｖｅｒ ｔｏ ｔｈｅ ｓｔａｎｄ
ｃｏｌｕｍｎ ｈｏｒｉｚｏｎｔａｌｌｙ ｗｉｔｈ ｔｈｅ ２ ｓｃｒｅｗｓ
ｐｒｏｖｉｄｅｄ．
M4×10
M4×10
ST4×14
1 2 3
Ｓｅｃｕｒｅ ｔｈｅ ｓｔａｎｄ ｃｏｌｕｍｎ ｔｏ ｔｈｅ ｂａｓｅ
ｗｉｔｈ ３ ｓｃｒｅｗｓ ｐｒｏｖｉｄｅｄ． Ｓｅｃｕｒｅ ｔｈｅ ｓｔａｎｄ ｃｏｖｅｒ ｔｏ ｔｈｅ ｓｔａｎｄ ｃｏｌｕｍｎ ｖｅｒｔｉｃａｌｌｙ ｗｉｔｈ ｔｈｅ １ ｓｃｒｅｗ
ｐｒｏｖｉｄｅｄ．
Ｓｅｃｕｒｅ ｔｈｅ ｓｔａｎｄ ｃｏｖｅｒ ｔｏ ｔｈｅ ｓｔａｎｄ
ｃｏｌｕｍｎ ｈｏｒｉｚｏｎｔａｌｌｙ ｗｉｔｈ ｔｈｅ ２ ｓｃｒｅｗｓ
ｐｒｏｖｉｄｅｄ．

3｜Ｇｅｔｔｉｎｇ Ｓｔａｒｔｅｄ ＵＳＥＲ ＭＡＮＵＡＬ
１．Ｌａｙ ｔｈｅ ｓｏｆｔ ｃｕｓｈｉｏｎ ｏｎ ｔｈｅ ｔａｂｌｅ ｗｈｉｃｈ ｃａｎ ｈｏｌｄ ｅｎｏｕｇｈ ｗｅｉｇｈｔ ｏｆ ｔｈｅ ｗｈｏｌｅ ＴＶ ｉｎ ｃａｓｅ ｏｆ ｃａｕｓｉｎｇ ｄａｍａｇｅ ｔｏ ＴＶ
ｏｒ ｐｅｒｓｏｎ．
２．Ｐｕｔ ｔｈｅ ＴＶ ｏｎ ｔｈｅ ｃｕｓｈｉｏｎ， ｗｉｔｈ ｉｔｓ ｂａｃｋ ｕｐｗａｒｄｓ ａｎｄ ｔｈｅ ＬＣＤ ｄｏｗｎｗａｒｄｓ．
３．Ｔｏ ｉｎｓｔａｌｌ ｔｈｅ ｂａｓｅ ｓｔａｎｄ， ｓｌｉｄｅ ｉｎ ｔｈｅ ｂａｓｅ ｓｔａｎｄ ｕｎｔｉｌ ｔｈｅ ｓｃｒｅｗ ｈｏｌｅｓ ａｒｅ ａｌｉｇｎｅｄ． Ｓｅｃｕｒｅ ｔｈｅ ｂａｓｅ ｓｔａｎｄ ｔｏ ｔｈｅ ＴＶ
ｗｉｔｈ ｔｈｅ ４ ｐｒｏｖｉｄｅｄ ｓｃｒｅｗｓ．
To install the stand
Getting Started
M5×12
(32" needs M4×10)
Ｎｅｖｅｒ ｃｏｖｅｒ ｏｒ ｂｌｏｃｋ ｔｈｅ ｈｅａｔ－ｒａｄｉａｔｉｎｇ ｈｏｌｅｓ．
Ａｖｏｉｄ ｏｐｅｒａｔｉｎｇ ｔｈｅ ＴＶ ｂｅｌｏｗ ５ ℃ ．
Ｍａｋｅ ｓｕｒｅ ｔｈａｔ ｙｏｕｒ ＴＶ ｈａｓ ａｄｅｑｕａｔｅ ａｉｒ ｃｉｒｃｕｌａｔｉｏｎ． Ａｌｌｏｗ ｅｎｏｕｇｈ ｓｐａｃｅ ａｒｏｕｎｄ ｔｈｅ ＴＶ ａｓ ｓｈｏｗｎ ｂｅｌｏｗ．
Ｎｅｖｅｒ ｉｎｓｔａｌｌ ｔｈｅ ＴＶ ｓｅｔ ａｓ ｆｏｌｌｏｗｓ：
Inadequate air circulation can lead to overheating of the TV and
may cause damage to your TV or cause re.
Leave enough space around the set.
Install with stand: Install on the wall:
Leave enough space
around the set.
Wall Wall
Air circulation is blocked.
Securing the Installation Space

ＵＳＥＲ ＭＡＮＵＡＬ Ｇｅｔｔｉｎｇ Ｓｔａｒｔｅｄ ｜4
Getting Started
Control Panel
Item Description
Power button Ｔｕｒｎ ｏｎ ｏｒ ｏｆｆ ｔｈｅ ＴＶ ｓｅｔ．
Power indicator
Ｄｅｐｅｎｄｉｎｇ ｏｎ ｙｏｕｒ ｃｈｏｉｃｅ ｏｆ Ｂｏｏｔ ＬＥＤ ａｎｄ Ｓｔａｎｄｂｙ ＬＥＤ， ｔｈｅ ＬＥＤ ｌｉｇｈｔ
ｉｎｃｌｕｄｉｎｇ ｌｏｎｇ ｂｒｉｇｈｔ ｍｏｄｅ， ｆｌａｓｈ ｍｏｄｅ ａｎｄ ｏｆｆ ｍｏｄｅ． （Ｆｏｒ ｍｏｒｅ ｉｎｆｏｒｍａｔｉｏｎ，
ｓｅｅ ＂Ｓｙｓｔｅｍ＂ ｏｆ Ｂａｓｉｃ Ｆｅａｔｕｒｅｓ）
Code matching of
remote control
Ｇｅｔ ｔｈｅ ｃｏｎｔｒｏｌｌｅｒ ａｐｐｒｏａｃｈ ｉｔ， ａｎｄ ｍａｔｃｈ ｔｈｅ ｃｏｄｅ ｆｏｒ ｒｅｍｏｔｅ ｃｏｎｔｒｏｌ
ａｃｃｏｒｄｉｎｇ ｔｏ ｔｈｅ ｏｐｅｒａｔｉｏｎ ｍｅｔｈｏｄ． （Ｆｏｒ ｍｏｒｅ ｉｎｆｏｒｍａｔｉｏｎ， ｓｅｅ ｔｈｅ ＂Ｃｏｄｅ
ｍａｔｃｈｉｎｇ＂ ｏｆ Ｒｅｍｏｔｅ Ｃｏｎｔｒｏｌ）
Side
button
Setting Ｏｐｅｎ ｔｈｅ ｓｅｔｔｉｎｇ ｍｅｎｕ．
CH+/▲ Ｓｅｌｅｃｔ ｔｈｅ ｐｒｅｖｉｏｕｓ ｃｈａｎｎｅｌ／Ｕｐ ｂｕｔｔｏｎ．
CH-/▼ Ｓｅｌｅｃｔ ｔｈｅ ｎｅｘｔ ｃｈａｎｎｅｌ／Ｄｏｗｎ ｂｕｔｔｏｎ．
VOL+/► Ｖｏｌｕｍｅ ｉｎｃｒｅａｓｉｎｇ／Ｒｉｇｈｔ ｂｕｔｔｏｎ．
VOL-/◄ Ｖｏｌｕｍｅ ｄｏｗｎ／Ｌｅｆｔ ｂｕｔｔｏｎ．
OK Ｃｏｎｆｉｒｍ ｂｕｔｔｏｎ．
HOME Ｅｎｔｅｒ ｔｈｅ ｔｅｌｅｖｉｓｉｏｎ＇ｓ Ｈｏｍｅ ｐａｇｅ；Ｐｒｅｓｓ ｔｈｅ ｂｕｔｔｏｎ ｔｏ ｅｘｉｔ ｔｈｅ ｓｔａｎｄｂｙ
ｍｏｄｅ．
Power indicator Code matching of
remote control
NOTES
• Code matching of different models can be different, specically it is based on to the position of symbol
on the entity (remote control code matching).
•In the home page and menu operation, you can use the arrow button to select, part of the interfaces
and applications does not support the button for the time being.
•As a result of time consumption of power down of power supply and system processing, please don't
switch on and off continuously and fast, otherwise it may cause abnormal working.
Power button
Setting
CH+/▲
CH-/▼
OK
HOME
VOL+/►
VOL-/◄

5｜Ｇｅｔｔｉｎｇ Ｓｔａｒｔｅｄ ＵＳＥＲ ＭＡＮＵＡＬ
Getting Started
Remote Control
Standby button
Ｅｎｔｅｒ ｓｔａｎｄｂｙ／ｅｘｉｔ ｓｔａｎｄｂｙ
Setting button
Ｓｔａｒｔ／ｓｔｏｐ ｑｕｉｃｋ ｓｅｔｕｐ ｍｅｎｕ
Power indicator
Cute button Return button
Ｅｘｉｔ ｔｈｅ ｃｕｒｒｅｎｔ ｍｅｎｕ
Home button
Ｅｎｔｅｒ ｔｈｅ ｔｅｌｅｖｉｓｉｏｎ＇ｓ Ｈｏｍｅ ｐａｇｅ
Micro-USB port
OK button /OFN
Ｃｏｎｆｉｒｍ ／ｐａｕｓｅ ｏｒ ｐｌａｙ／ｓｌｉｄｉｎｇ
ｓｃｒｅｅｎ
Ｄｉｓｐｌａｙ ｔｈｅ Ｃｈａｎｎｅｌ Ｌｉｓｔ ｉｎ ＤＴＶ ／
ＡＴＶ
Mute button
Ｓｔａｒｔ／Ｅｘｉｔ ｔｈｅ ｍｕｔｅ ｓｔａｔｅ
Volume increasing button
Code matching indicator
Numeric buttons
Ｓｅｌｅｃｔ ｃｈａｎｎｅｌ／Ｉｎｐｕｔ ｃｈａｒａｃｔｅｒ
▲/▼/◄/► button
Ｕｐ／ｄｏｗｎ／ｌｅｆｔ／ｒｉｇｈｔ ｂｕｔｔｏｎ
+/– button
Ｃｈａｎｎｅｌ ｕｐ／ｃｈａｎｎｅｌ ｄｏｗｎ ｂｕｔｔｏｎ
/button
Ｒｅｗｉｎｄ／ｆａｓｔ－ｆｏｒｗａｒｄ ｂｕｔｔｏｎ
（ｓｅｅ ＂Ａｄｖａｎｃｅｄ Ｆｅａｔｕｒｅｓ＂）
ＮＯＴＥ： Ｔｈｉｓ ｒｅｇｉｏｎ ｆｏｒ ｒｅｕｓｅ ｂｕｔｔｏｎ
ＣＲＦ６Ｂ１６ ｉｓ ａ ｋｉｎｄ ｏｆ ｍｕｌｔｉ－ｆｕｎｃｔｉｏｎａｌ ｒｅｍｏｔｅ ｃｏｎｔｒｏｌｌｅｒ ｆｏｒ ｔｈｅ ｎｅｔｗｏｒｋ ＴＶ ｓｅｔ ａｓ ａ ｃｏｍｐｌｅｘ ｏｆ ｋｅｙｂｏａｒｄ， ａｉｒ ｍｏｕｓｅ
ａｎｄ ＯＦＮ ｔｏｕｃｈ ｐａｎｅｌ． Ｉｔ ｉｓ ｔｏ ｃｏｎｔｒｏｌ ｏｔｈｅｒ ｆｕｎｃｔｉｏｎｓ ｔｈｒｏｕｇｈ ｔｈｅ ＲＦ （ｒａｄｉｏ ｆｒｅｑｕｅｎｃｙ） ｍｏｄｅ． ＲＦ ｒｅｃｅｉｖｉｎｇ ｔｅｒｍｉｎａｌ
（ｄｏｎｇｌｅ） ｉｓ ｅｍｂｅｄｄｅｄ ｉｎ ＴＶ ｓｅｔ． Ｔｈｅ ｃｏｎｔｒｏｌｌｅｒ ｃａｎｎｏｔ ｂｅ ｕｓｅｄ ｂｅｆｏｒｅ ｃｏｄｅ ｍａｔｃｈｉｎｇ． Ｆｏｒ ｔｈｅ ｃｏｄｅ ｍａｔｃｈｉｎｇ
ｏｐｅｒａｔｉｏｎ＇ｓ ｄｅｔａｉｌｅｄ ｓｔｅｐｓ， ｐｌｅａｓｅ ｓｅｅ ＂ｃｏｄｅ ｍａｔｃｈｉｎｇ＂ ｌａｔｅｒ．
Quantity description
Ｗｈｅｎ ｔｈｅ ｂａｔｔｅｒｙ ｉｓ ｌｏｗ， ｔｈｅ ｐｏｗｅｒ ｉｎｄｉｃａｔｏｒ
ｌｉｇｈｔ （ｒｅｄ） ｗｉｌｌ ｓｈｉｎｉｎｇ， ｐｌｅａｓｅ ｃｈａｒｇｉｎｇ ｔｈｅ
ｂａｔｔｅｒｙ． Ｗｈｅｎ ｔｈｅ ｂａｔｔｅｒｙ ｓｈｏｒｔａｇｅ ｉｓ ｓｅｒｉｏｕｓ，
ａｌｌ ｉｎｄｉｃａｔｉｏｎ ｌａｍｐｓ ａｒｅ ｏｆｆ， ａｎｄ ｐｒｅｓｓ ａｎｙ
ｂｕｔｔｏｎ， ｔｈｅｒｅ ｗｉｌｌ ｎｏ ａｎｙ ｒｅａｃｔｉｏｎ．
Charging the battery
Ｔｈｅ ｒｅｍｏｔｅ ｃｏｎｔｒｏｌ ｉｓ ｅｍｂｅｄｄｅｄ ｗｉｔｈ
ｒｅｃｈａｒｇｅａｂｌｅ ｌｉｔｈｉｕｍ ｂａｔｔｅｒｙ． Ｔｏ ｃｈａｒｇｅ ｔｈｅ
ｂａｔｔｅｒｙ， ｕｓｅ ｔｈｅ Ｍｉｃｒｏ－ＵＳＢ ｃａｂｌｅ ｔｏ ｃｏｎｎｅｃｔ
ｔｈｅ Ｍｉｃｒｏ－ＵＳＢ ｐｏｒｔ ｏｆ ｔｈｅ ｒｅｍｏｔｅ ｃｏｎｔｒｏｌ ｔｏ
ＵＳＢ ｐｏｒｔ ｏｆ ｅｘｔｅｒｎａｌ ｄｅｖｉｃｅ． Ｗｈｅｎ ｃｈａｒｇｉｎｇ，
ｔｈｅ ｐｏｗｅｒ ｉｎｄｉｃａｔｏｒ ｌｉｇｈｔ （ｒｅｄ） ｗｉｌｌ ｂｅ ｏｎ ｆｏｒ
ｌｏｎｇ， ａｆｔｅｒ ｔｈｅ ｃｏｍｐｌｅｔｅ ｏｎ ｏｆ ｃｈａｒｇｉｎｇ， ｔｈｅ
ｐｏｗｅｒ ｉｎｄｉｃａｔｏｒ ｗｉｌｌ ｂｅ ｏｆｆ．
Attention
·Ｂｅｃａｕｓｅ ｏｆ ｔｈｅ ｌｉｍｉｔａｔｉｏｎ ｏｆ ｒｅｃｈａｒｇｅａｂｌｅ
ｂａｔｔｅｒｙ ｃｈａｒｇｉｎｇ ｃｙｃｌｅ， ａｆｔｅｒ ｂｅｉｎｇ ｕｓｅｄ ｆｏｒ ａ
ｌｏｎｇ ｔｉｍｅ， ｉｆ ａｆｔｅｒ ｔｈｅ ｂａｔｔｅｒｙ ｉｓ ｆｕｌｌｙ ｃｈａｒｇｅｄ，
ｔｈｅ ｔｉｍｅ ｉｓ ｏｂｖｉｏｕｓｌｙ ｓｈｏｒｔｅｎｅｄ， ｐｌｅａｓｅ ｃａｌｌ
Ｈｉｓｅｎｓｅ＇ｓ ａｕｔｈｏｒｉｚｅｄ ｓｅｒｖｉｃｅ ｐｒｏｖｉｄｅｒ ｆｏｒ
ｃｈｅｃｋｉｎｇ， ｔｈｅ ｕｓｅｒ ｃａｎｎｏｔ ｄｉｓａｓｓｅｍｂｌｅ ｉｔ
ａｕｔｏｍａｔｉｃａｌｌｙ ｔｏ ｒｅｐｌａｃｅ ｔｈｅ ｂａｔｔｅｒｙ， ｉｆ ｔｈｅ
ｂａｔｔｅｒｙ ｒｅｐｌａｃｅｍｅｎｔ ｉｓ ｉｍｐｒｏｐｅｒ， ｔｈｅｒｅ ｗｉｌｌ ｂｅ
ｄａｎｇｅｒ ｏｆ ｅｘｐｌｏｓｉｏｎ．
· Ｔｈｅ ｃｈａｒｇｉｎｇ ｖｏｌｔａｇｅ ｏｆ ｒｅｍｏｔｅ ｃｏｎｔｒｏｌ ｉｓ ＤＣ
５Ｖ．
·Ｗｈｅｎ ｉｔ ｉｓ ｕｓｅｄ ｆｏｒ ｔｈｅ ｆｉｒｓｔ ｔｉｍｅ， ｔｈｅｒｅ ｉｓ
ｎｅｅｄ ｔｏ ｃｈａｒｇｅ ｔｈｅ ｄｅｖｉｃｅ ｆｏｒ ８ ｈｏｕｒｓ， ｔｈｅｎ ｉｔ
ｗｉｌｌ ｂｅ ｃｈａｒｇｅｄ ａｓ ｎｅｅｄｅｄ．
·Ｉｆ ｙｏｕ ｄｏ ｎｏｔ ｕｓｅ ｔｈｅ ｒｅｍｏｔｅ ｃｏｎｔｒｏｌ ｆｏｒ
ｌｏｎｇ ｔｉｍｅ ｏｒ ｔｈｅ ｂａｔｔｅｒｙ ｒｕｎｓ ｏｕｔ， ｐｌｅａｓｅ
ｃｈａｒｇｅ， ｔｈｅ ｐｏｗｅｒ ｉｎｄｉｃａｔｏｒ ｌｉｇｈｔ （ｒｅｄ） ｍａｙ ｂｅ
ｓｕｓｐｅｎｄｅｄ ｆｏｒ ｓｈｉｎｉｎｇ， ｄｕｒｉｎｇ ｃｈａｒｇｉｎｇ， ｐｌｅａｓｅ
ｓｔｏｐ ｕｓｉｎｇ．
· Ｗｈｉｌｅ ｃｈａｒｇｉｎｇ ｏｒ ｌｏｎｇ ｔｉｍｅ ｕｓｅ ｏｆ ｄｅｖｉｃｅ， ｔｈｅ
ｓｕｒｆａｃｅ ｍａｙ ｂｅ ｈｅａｔｉｎｇ， ｗｈｉｃｈ ｉｓ ａ ｎｏｒｍａｌ
ｐｈｅｎｏｍｅｎｏｎ．
· Ｉｆ ｔｈｅ ｒｅｍｏｔｅ ｃｏｎｔｒｏｌ ｅｎｃｏｕｎｔｅｒｓ ｍａｌｆｕｎｃｔｉｏｎ，
ｐｌｅａｓｅ ｒｅ－ｍａｔｃｈ ｔｈｅ ｃｏｄｅ ａｃｃｏｒｄｉｎｇ ｔｏ ｔｈｅ
ｅｘｐｌａｎａｔｉｏｎ．
Volume down button
ＣＲＦ６Ｂ１６

ＵＳＥＲ ＭＡＮＵＡＬ Ｇｅｔｔｉｎｇ Ｓｔａｒｔｅｄ ｜6
Getting Started
Indicator description
OFN
Standby description
Button pressing
Air mouse
Code matching
Ｔｈｅ ｒｅｍｏｔｅ ｃｏｎｔｒｏｌ ｈａｓ ｔｈｒｅｅ ｋｉｎｄｓ ｏｆ ｓｔａｔｅ ｉｎｄｉｃａｔｉｎｇ
ｌａｍｐ： ｐｏｗｅｒ ｉｎｄｉｃａｔｏｒ ｌｉｇｈｔ （ｂｌｕｅ）， ｔｈｅ ｐｏｗｅｒ ｉｎｄｉｃａｔｏｒ
ｌｉｇｈｔ （ｒｅｄ）， ｔｈｅ ｃｏｄｅ ｍａｔｃｈｉｎｇ ｉｎｄｉｃａｔｉｎｇ ｌａｍｐ．
Ｐｏｗｅｒ ｉｎｄｉｃａｔｏｒ ｌｉｇｈｔ （ｂｌｕｅ）： ｉｎ ＴＶ ｒｅｍｏｔｅ ｃｏｎｔｒｏｌ，
ｔｈｅ ｒｅｍｏｔｅ ｃｏｎｔｒｏｌ＇ｓ ｐｏｗｅｒ ｉｎｄｉｃａｔｏｒ ｌｉｇｈｔ （ｂｌｕｅ）
ｗｉｌｌ ｂｅ ｓｈｉｎｉｎｇ， ｗｈｅｎ ｉｔ ｉｓ ｓｔａｎｄｂｙ ｏｒ ｔｈｅ ｂａｔｔｅｒｙ ｉｓ
ｒｅｍｏｖｅｄ， ｔｈｅ ｉｎｄｉｃａｔｏｒ ｌａｍｐ ｗｉｌｌ ｂｅ ｏｆｆ．
Ｐｏｗｅｒ ｉｎｄｉｃａｔｏｒ ｌｉｇｈｔ （ｒｅｄ）： ｗｈｉｌｅ ｃｈａｒｇｉｎｇ， ｔｈｅ ｌｉｇｈｔ
ｗｉｌｌ ｂｅ ｏｎ ｃｏｎｔｉｎｕｏｕｓｌｙ， ａｎｄ ｉｆ ｔｈｅｒｅ ｉｓ ｅｌｅｃｔｒｉｃｉｔｙ
ｓｈｏｒｔａｇｅ， ｉｔ ｗｉｌｌ ｂｅ ｓｈｉｎｉｎｇ．
Ｃｏｄｅ ｍａｔｃｈｉｎｇ ｉｎｄｉｃａｔｏｒ： ｉｎ ｔｈｅ ｃｏｄｅ ｍａｔｃｈｉｎｇ， ｔｈｅ
ｃｏｄｅ ｍａｔｃｈｉｎｇ ｉｎｄｉｃａｔｏｒ ｌｉｇｈｔ ｗｉｌｌ ｂｅ ｓｈｉｎｉｎｇ．
NOTE
In the corresponding mode, the corresponding
indication light will be shining. After entering the
standby state, all lights will be extinguished.
Ｔｈｅ ｒｅｍｏｔｅ ｃｏｎｔｒｏｌ ｈａｓ ＯＦＮ （ｔｏｕｃｈ ｐａｎｅｌ）， ｉｔ ｉｓ
ａｖａｉｌａｂｌｅ ｆｏｒ ｔｈｅ ｆｉｎｇｅｒｓ ｔｏ ｓｌｉｄｅ ｔｈｅ ｔｏｕｃｈ ｐａｎｅｌ ｔｏ
ｃｏｎｔｒｏｌ ｔｈｅ ｔｅｌｅｖｉｓｉｏｎ．
Ｙｏｕ ｃａｎ ａｃｈｉｅｖｅ ｌｅｆｔｗａｒｄ ｓｌｉｄｉｎｇ ａｎｄ ｒｉｇｈｔｗａｒｄ
ｓｌｉｄｉｎｇ ｏｎ ｔｈｅ ＯＦＮ， ａｎｄ ｔｈｅ ＴＶ ｓｃｒｅｅｎ ｗｉｌｌ ｐｒｏｄｕｃｅ
ｔｈｅ ｃｏｒｒｅｓｐｏｎｄｉｎｇ ｓｌｉｄｉｎｇ ｅｆｆｅｃｔ ｔｏ ａｃｈｉｅｖｅ ｆａｓｔ
ｓｃｒｅｅｎ ｃｕｔｔｉｎｇ．
NOTES
•Some application programs cannot support the
sliding operation.
• When using OFN, please keep ngers dry, once it is
wet, it may affect its sensitivity.
Ｗｈｅｎ ｔｈｅ ｒｅｍｏｔｅ ｃｏｎｔｒｏｌ ｄｅｖｉｃｅ ｉｓ ｉｎ ａ ｑｕｉｅｓｃｅｎｔ
ｓｔａｔｅ， ｉｔ ｗｉｌｌ ａｕｔｏｍａｔｉｃａｌｌｙ ｅｎｔｅｒ ａ ｓｔａｔｅ ｏｆ ｄｏｒｍａｎｃｙ．
Ａｆｔｅｒ ｅｎｔｅｒｉｎｇ ａ ｓｔａｔｅ ｏｆ ｄｏｒｍａｎｃｙ， ｔｈｅ ｌｉｇｈｔ ｗｉｌｌ ｂｅ
ｓｈｕｔ ｏｆｆ， ｐｒｅｓｓ ａｎｙ ｂｕｔｔｏｎ ｔｏ ｗａｋｅ ｕｐ ｔｈｅ ｏｐｅｒａｔｉｏｎ，
ａｆｔｅｒ ｗａｋｉｎｇ ｕｐ， ｉｔ ｗｉｌｌ ｂｅ ｂａｃｋ ｔｏ ｔｈｅ ｓｔａｔｅ ｂｅｆｏｒｅ ｔｈｅ
ｓｔａｎｄｂｙ ｓｔａｔｅ．
Ａｆｔｅｒ ｔｈｅ ｃｏｄｅ ｍａｔｃｈｉｎｇ ｉｓ ｃｏｍｐｌｅｔｅｄ， ｐｒｅｓｓ ｔｈｅ
ｒｅｍｏｔｅ ｃｏｎｔｒｏｌ＇ｓ ｂｕｔｔｏｎｓ ｆｏｒ ｔｈｅ ｃｏｒｒｅｓｐｏｎｄｉｎｇ
ｏｐｅｒａｔｉｏｎ． Ｉｎ ｔｈｅ ｂｕｔｔｏｎ ｏｐｅｒａｔｉｏｎ， ｔｈｅ ｐｏｗｅｒ ｉｎｄｉｃａｔｏｒ
ｌｉｇｈｔ （ｂｌｕｅ） ｗｉｌｌ ｂｅ ｓｈｉｎｉｎｇ．
Ｆｏｒ ｔｈｅ ｃｏｎｖｅｎｉｅｎｃｅ ｏｆ ｔｈｅ ｕｓｅｒ ｏｐｅｒａｔｉｏｎ， ｔｈｅ ｒｅｍｏｔｅ
ｓｕｐｐｏｒｔ ｓｕｐｐｏｒｔｓ ｔｈｅ ａｉｒ ｍｏｕｓｅ ｆｕｎｃｔｉｏｎ．
Ｓｗｉｔｃｈ ｏｎ ｔｈｅ ａｉｒ ｍｏｕｓｅ： ｓｈａｋｅ ｔｈｅ ｒｅｍｏｔｅ ｃｏｎｔｒｏｌ
ｇｅｎｔｌｙ ｔｏ ａｃｔｉｖａｔｅ ｔｈｅ ａｉｒ ｍｏｕｓｅ． Ａｔ ｔｈｉｓ ｐｏｉｎｔ， ｙｏｕ
ｃａｎ ｈｏｌｄ ｔｈｅ ｒｅｍｏｔｅ ｃｏｎｔｒｏｌ ｗｉｔｈ ｏｎｅ ｈａｎｄ ｉｎ ｔｈｅ
ｖｅｒｔｉｃａｌ ｄｉｒｅｃｔｉｏｎ， ｔｈｒｏｕｇｈ ｔｈｅ ｗｒｉｓｔ ｍｏｖｅｍｅｎｔ， ｙｏｕ
ｃａｎ ｃｏｎｔｒｏｌ ｔｈｅ ｍｏｕｓｅ．
Ｓｗｉｔｃｈ ｏｆｆ ｔｈｅ ａｉｒ ｍｏｕｓｅ： ｐｒｅｓｓ ａｎｙ Direction buttons
（ｕｐ， ｄｏｗｎ， ｌｅｆｔ ａｎｄ ｒｉｇｈｔ）， ｙｏｕ ｃａｎ ｓｔｏｐ ｔｈｅ ｆｕｎｃｔｉｏｎ．
Ｉｆ ｔｈｅ ａｉｒ ｍｏｕｓｅ ａｐｐｅａｒｓ ｔｏ ｄｒｉｆｔ ｐｈｅｎｏｍｅｎｏｎ，
ｐｌｅａｓｅ ｐｌａｃｅ ｔｈｅ ｒｅｍｏｔｅ ｃｏｎｔｒｏｌ ｓｔａｔｉｃａｌｌｙ ｔｏ ｔｈｅ
ｓｔａｎｄｂｙ ｓｔａｔｅ， ｔｈｅｎ ｒｅｕｓｅ ｉｔ．
NOTES
•When the air mouse is in the running state, press
the OK button with the left mouse button to achieve
single-clicking operation.
•In the home page operation and browsing the
webpage, you can use air mouse, and part of the
interfaces and applications cannot be supported
temporarily.
Ｗｈｉｌｅ ｕｓｉｎｇ ｔｈｅ ｒｅｍｏｔｅ ｃｏｎｔｒｏｌ ｆｏｒ ｔｈｅ ｆｉｒｓｔ ｔｉｍｅ，
ｔｈｅｒｅ ｉｓ ｎｅｅｄ ｔｏ ｃａｒｒｙ ｏｕｔ ｔｈｅ ｏｐｅｒａｔｉｏｎ ｏｆ ｔｈｅ ｃｏｄｅ
ｍａｔｃｈｉｎｇ． Ｗｈｅｎ ｔｈｅ ＴＶ ｉｓ ｏｎ， ｍａｋｅ ｔｈｅ ｒｅｍｏｔｅ ｃｏｎｔｒｏｌ
ｎｅａｒ ｔｈｅ ａｒｅａ ｗｉｔｈｉｎ ５ｃｍ ｂｅｌｏｗ ｔｈｅ ｃｏｄｅ ｍａｔｃｈｉｎｇ
ｐｏｒｔｉｏｎ ｏｆ ｔｈｅ ＴＶ， ｐｒｅｓｓ ａｎｄ ｈｏｌｄ ｔｈｅ "#" button ｏｎ
ｔｈｅ ｒｅｍｏｔｅ ｃｏｎｔｒｏｌ ｆｏｒ ｍｏｒｅ ｔｈａｎ ３ ｓｅｃｏｎｄｓ， ｔｈｅ
ｒｅｍｏｔｅ ｃｏｎｔｒｏｌ＇ｓ ｐｏｗｅｒ ｉｎｄｉｃａｔｏｒ （ｂｌｕｅ） ｗｉｌｌ ｂｅｇｉｎ ｆａｓｔ
ｓｈｉｎｙ （ｐｌｅａｓｅ ｒｅｌｅａｓｅ ｔｈｅ "#" button， ｋｅｅｐ ｔｈｅ ｒｅｍｏｔｅ
ｃｏｎｔｒｏｌ ｉｎ ｔｈｅ ａｒｅａ ｏｆ ｃｏｄｅ ｍａｔｃｈｉｎｇ）， ｔｈｅ ｒｅｍｏｔｅ
ｃｏｎｔｒｏｌ＇ｓ ｐｏｗｅｒ ｉｎｄｉｃａｔｏｒ （ｂｌｕｅ） ａｎｄ ｔｈｅ ｃｏｄｅ ｍａｔｃｈｉｎｇ
ｉｎｄｉｃａｔｏｒ ｗｉｌｌ ｂｅ ｓｌｏｗｌｙ ｆｌａｓｈｉｎｇ ｆｏｒ ｔｈｒｅｅ ｔｉｍｅｓ， ｗｈｉｃｈ
ｉｎｄｉｃａｔｅｓ ｔｈａｔ ｔｈｅ ｏｐｅｒａｔｉｏｎ ｉｓ ｓｕｃｃｅｓｓｆｕｌ．
Ａｆｔｅｒ ｔｈｅ ｓｕｃｃｅｓｓ ｏｆ ｃｏｄｅ ｍａｔｃｈｉｎｇ， ｔｈｅ ｒｅｍｏｔｅ
ｃｏｎｔｒｏｌ ｗｉｌｌ ｂｅ ｂａｃｋ ｔｏ ｔｈｅ ｉｎｉｔｉａｌ ｓｔａｔｅ ｏｆ ｐｏｗｅｒ．
Ｉｆ ｔｈｅ ｍａｔｃｈｉｎｇ ｉｓ ｎｏｔ ｓｕｃｃｅｓｓｆｕｌ， ｔｈｅ ｒｅｍｏｔｅ
ｃｏｎｔｒｏｌ＇ｓ ｉｎｄｉｃａｔｏｒ ｌｉｇｈｔ ｗｉｌｌ ｂｅ ｒｅｔｕｒｎｅｄ ｔｏ ｎｏｒｍａｌ
ｓｈｉｎｉｎｇ， ｐｌｅａｓｅ ｒｅｐｅａｔ ｔｈｅ ｏｐｅｒａｔｉｏｎ ａｇａｉｎ ｆｏｒ ｒｅ－
ｍａｔｃｈｉｎｇ ｔｈｅ ｃｏｄｅ．
Ｔｈｉｓ ｍａｃｈｉｎｅ ｃａｎ ｓｉｍｕｌｔａｎｅｏｕｓｌｙ ｓｕｐｐｏｒｔ ｔｗｏ
ｒｅｍｏｔｅ ｃｏｎｔｒｏｌ ｄｅｖｉｃｅｓ， ｔｈｅ ｒｅｍｏｔｅ ｃｏｎｔｒｏｌ
ｍａｔｃｈｉｎｇ ｔｈｅ ｃｏｄｅ ｆｏｒ ｔｈｅ ｆｉｒｓｔ ｔｉｍｅ ｉｓ ｔｈｅ ｍａｉｎ
ｒｅｍｏｔｅ ｃｏｎｔｒｏｌ； ａｎｄ ｔｈｅ ｏｎｅ ｄｏｅ ｓｅｃｏｎｄ ｃｏｄｅ
ｍａｔｃｈｉｎｇ ｉｓ ｔｈｅ ａｕｘｉｌｉａｒｙ ｒｅｍｏｔｅ ｃｏｎｔｒｏｌ， ｐｌｅａｓｅ ｕｓｅ
ｔｈｅ "*" button ｆｏｒ ｃｏｄｅ ｍａｔｃｈｉｎｇ ｏｐｅｒａｔｉｏｎ．
NOTES
•The remote control’s initial code matching will
generally be completed by the service personnel
when they get to your home for installing the TV set.
•If the remote control encounters an unknown error,
the receiver’s signal may probably be disturbed, at
this time, please remove the interference, and
conduct the code matching.
•In the standby mode, it will not support the code
matching for the time being.

7｜Ｇｅｔｔｉｎｇ Ｓｔａｒｔｅｄ ＵＳＥＲ ＭＡＮＵＡＬ
Others
Ａｓ ｔｈｅ ｗｉｒｅｌｅｓｓ ｄｅｖｉｃｅ， ｔｈｅ ｒｅｍｏｔｅ ｃｏｎｔｒｏｌ ｄｅｖｉｃｅ
ａｎｄ ｒｅｃｅｉｖｅｒ＇ｓ ｓｉｇｎａｌ ｍａｙ ｂｅ ｕｎｄｅｒ ｉｎｔｅｒｆｅｒｅｎｃｅ
ａｎｄ ｓｈｉｅｌｄｉｎｇ； ｔｈｅ ｗｉｒｅｌｅｓｓ ｃａｒｄ ｉｎｓｅｒｔｅｄ ｉｎ ｔｈｅ ＵＳＢ
ｐｏｒｔ ｍａｙ ｉｎｔｅｒｆｅｒｅ ｗｉｔｈ ｔｈｅ ｎｏｒｍａｌ ｗｏｒｋ ｏｆ ｒｅｃｅｉｖｅｒ；
ａｎｄ ｔｈｅ ｔｅｌｅｖｉｓｉｏｎ ｗａｌｌ ｍａｙ ｌｅａｄ ｔｏ ａｔｔｅｎｕａｔｉｏｎ ｏｆ
ｒｅｃｅｉｖｅｒ＇ｓ ｓｉｇｎａｌ．
Ｗｈｅｎ ｔｈｅ ｂａｔｔｅｒｙ ｉｓ ｎｏｒｍａｌ ｉｎ ｅｌｅｃｔｒｉｃ ｑｕａｎｔｉｔｙ， ｉｆ
ｔｈｅ ｒｅｍｏｔｅ ｃｏｎｔｒｏｌ ｅｎｃｏｕｎｔｅｒｓ ａｎ ｕｎｋｎｏｗｎ ｅｒｒｏｒ，
ｔｈｅ ｕｓｅｒ ｃａｎ ｉｎｓｅｒｔ ｔｈｅ ｒｅｓｅｔ ｈｏｌｅ ａｔ ｔｈｅ ｂｏｔｔｏｍ ｏｆ
ｂａｃｋ ｏｆ ｒｅｍｏｔｅ ｃｏｎｔｒｏｌ ｗｉｔｈ ａ ｎｅｅｄｌｅ－ｓｈａｐｅｄ ｏｂｊｅｃｔ
ａｎｄ ｐｒｅｓｓ ｆｏｒ １ ￣ ２ ｓｅｃｏｎｄｓ， ｔｈｅ ｒｅｍｏｔｅ ｃｏｎｔｒｏｌ ｃａｎ
ｗｏｒｋ ｎｏｒｍａｌｌｙ．
Ｉｎ ＡＴＶ ｍｏｄｅ， ｐｒｅｓｓ ｔｈｅ OK button ｔｏ ｄｉｓｐｌａｙ ｔｈｅ
Ａｌｌ ｃｈａｎｎｅｌ ｌｉｓｔ．
Ｉｎ ＤＴＶ ｍｏｄｅ， ｐｒｅｓｓ ｔｈｅ OK button ｔｏ ｄｉｓｐｌａｙ ｔｈｅ
Ａｌｌ， Ｒｅｃｅｎｔ， Ｒａｄｉｏ ｌｉｓｔ．
Ｐｒｅｓｓ ｔｈｅ ▲/▼ button ｔｏ ｓｅｌｅｃｔ ｔｈｅ ｃｈａｎｎｅｌ， ｐｒｅｓｓ
ｔｈｅ OK button ｔｏ ｅｎｔｅｒ ｔｈｅ ｃｈａｎｎｅｌ ｔｏ ｗａｔｃｈ ｔｈｅ
ｐｒｏｇｒａｍ．
Ｗｈｅｎ ｔｈｅ ｆｏｃｕｓ ｉｓ ｏｎ ｔｈｅ ｃｈａｎｎｅｌ， ｐｒｅｓｓ ◄ button
ｔｏ ｏｐｅｎ ｔｈｅ ＥＰＧ ｉｎｔｅｒｆａｃｅ．
·Ｗｈｅｎ ｔｈｅ ｆｏｃｕｓ ｉｓ ｏｎ ｔｈｅ ｄａｙ， ｐｒｅｓｓ ▲/▼ button
ｔｏ ｓｅｌｅｃｔ ｔｈｅ ｄａｙ ｏｆ ｔｈｅ ｗｅｅｋ．
·Ｗｈｅｎ ｔｈｅ ｆｏｃｕｓ ｉｓ ｏｎ ｔｈｅ ｐｒｏｇｒａｍ， ｐｒｅｓｓ ▲/▼
button ｔｏ ｓｅｌｅｃｔ ｐｒｏｇｒａｍ ａｎｄ ｐｒｅｓｓ OK button
ｔｏ ｂｏｏｋ ｉｔ， ｒｅ－ｐｒｅｓｓ OK button ｔｏ ｕｎｄｏ ｉｔ．
Getting Started
Channel list
Setting button
Ｐｒｅｓｓ ｔｈｅ ｂｕｔｔｏｎ ｔｏ ｓｗｉｔｃｈ ｏｎ／ｏｆｆ ｔｈｅ ｓｅｔｔｉｎｇｓ ｍｅｎｕ，
ｉｎｃｌｕｄｉｎｇ： Ｓｏｕｒｃｅ， ３Ｄ／２Ｄ， Ｓｃｒｅｅｎ Ｏｆｆ， Ｎｉｃａｍ， Ｍｏｒｅ．
NOTE
In the different application modes, the menu of
setting button will vary, according to the specific
functions supported by different application scenes,
press the button for decision.
Source
Ｓｅｌｅｃｔ ｔｈｅ ｃｕｒｒｅｎｔ ｉｎｐｕｔ ｓｉｇｎａｌ ｉｎ ｔｈｅ ｍａｎｎｅｒ ｏｆ
ｍｅｎｕ， ｔｈｅ ｍｅｎｕ ｉｓ ｔｏ ｐｒｏｖｉｄｅ ａｌｌ ｓｉｇｎａｌ ｉｎｐｕｔ ｍｏｄｅｓ
ｆｏｒ ｔｈｅ ＴＶ ｓｅｔ， ｉｎｃｌｕｄｉｎｇ： ＤＴＶ， ＡＴＶ， ＡＶ１， ＡＶ２，
ＣＯＭＰＯＮＥＮＴ， ＨＤＭＩ１， ＨＤＭＩ２， ＨＤＭＩ３， ＶＧＡ．
NOTE
If you want to appreciate the program from the
external equipment, you should choose the
connection mode corresponding to the device, and
use the remote control to select the correct signal
source. (See "Connections")
3D / 2D
Ｉｎ ＤＴＶ／ＡＴＶ ｍｏｄｅ， ｙｏｕ ｃａｎ ｓｗｉｔｃｈ ｔｈｅ ｖｉｄｅｏ
ｂｅｔｗｅｅｎ ３Ｄ ａｎｄ ２Ｄ ｄｉｓｐｌａｙ．
NOTE
3D mode options vary depending on the source of
the video varies.
Settings
Ｓｏｕｒｃｅ ＡＴＶ
３Ｄ／２Ｄ
Ｓｃｒｅｅｎ Ｏｆｆ
Ｎｉｃａｍ Ｍｏｎｏ
Ｍｏｒｅ
Screen Off
Ｉｆ ｙｏｕ ｓｅｌｅｃｔｅｄ ＂Ｓｃｒｅｅｎ Ｏｆｆ＂， ｔｈｅ ＴＶ ｓｃｒｅｅｎ ｗｉｌｌ ｂｅ
ｃｌｏｓｅｄ． Ｉｎ ｔｈｉｓ ｓｔａｔｅ， ｔｈｅ ＴＶ ｉｓ ｓｔｉｌｌ ｒｕｎｎｉｎｇ， ｙｏｕ ｃａｎ
ｒｅｄｕｃｅ ｐｏｗｅｒ ｃｏｎｓｕｍｐｔｉｏｎ ｗｈｅｎ ｌｉｓｔｅｎｉｎｇ ｔｏ ｔｈｅ
ｍｕｓｉｃ． Ｙｏｕ ｃａｎ ｐｒｅｓｓ ｔｈｅ Home button， Direction
buttons， OK button ａｎｄ Return button ｅｔｃ． ｔｏ
ｒｅｃｏｖｅｒｙ ｔｈｅ ｓｃｒｅｅｎ．
Nicam
Ｉｎ ＤＴＶ／ＡＴＶ ｍｏｄｅ， ｉｆ ｔｈｅ ｐｒｏｇｒａｍ ｈａｓ Ｎｉｃａｍ
ｆｕｎｃｔｉｏｎ， ｙｏｕ ｃａｎ ｓｗｉｔｃｈ ｔｈｅ ｔｒａｃｋｓ．
More
Ｙｏｕ ｃａｎ ｕｓｅ ｔｈｉｓ ｍｅｎｕ ｔｏ ｓｅｔ ｔｈｅ ＴＶ， ｉｎｃｌｕｄｉｎｇ：
Ｇｅｎｅｒａｌ， Ｐｉｃｔｕｒｅ， Ｓｏｕｎｄ， ３Ｄ， Ｃｈａｎｎｅｌ， Ｎｅｔｗｏｒｋ，
Ｓｙｓｔｅｍ， Ａｂｏｕｔ．
All Recent Radio
1. J2 DTV
2. iNews DTV
3. High Denition Jade DTV
3. High Denition Jade
Thursday (2012-04-19)
０７：１６ 创富坊
０８：４０ 新闻提要
０８：４５ 包青天之七侠五 ．．．
０９：１５ 今日 ＶＩＰ
０９：４５ 故宫 １００
０９：５０ 金曲挑战站
０９：５５ 劲歌金曲
Friday (2012-04-20)
Saturday (2012-04-21)
Sunday (2012-04-19)
Playing

ＵＳＥＲ ＭＡＮＵＡＬ Ｃｏｎｎｅｃｔｉｏｎｓ ｜8
Item Description
Antenna Ｃｏｎｎｅｃｔ ａｎ ａｎｔｅｎｎａ ｏｒ ｃａｂｌｅ ＴＶ ｔｏ ｔｈｉｓ ｊａｃｋ．
HDMI ＨＤＭＩ （Ｈｉｇｈ－Ｄｅｆｉｎｉｔｉｏｎ Ｍｕｌｔｉｍｅｄｉａ Ｉｎｔｅｒｆａｃｅ） ｐｒｏｖｉｄｅｓ ａｎ ｕｎｃｏｍｐｒｅｓｓｅｄ ｓｉｇｎａｌ， ａｌｌ ｄｉｇｉｔａｌ ａｕｄｉｏ／
ｖｉｄｅｏ ｉｎｔｅｒｆａｃｅ ｂｅｔｗｅｅｎ ｔｈｉｓ ＴＶ ａｎｄ ａｎｙ ＨＤＭＩ－ｄｅｖｉｃｅ， ｓｕｃｈ ａｓ ａ ｓｅｔ－ｔｏｐ ｂｏｘ， Ｂｌｕ－ ｒａｙ ｄｉｓｃ
ｐｌａｙｅｒ， ａｎｄ Ａ／Ｖ ｒｅｃｅｉｖｅｒ．
COMPONENT Ｃｏｎｎｅｃｔ ｔｏ ａ ＤＶＤ ｐｌａｙｅｒ， Ｄｉｇｉｔａｌ Ｓｅｔ－Ｔｏｐ－Ｂｏｘ， ｏｒ ｏｔｈｅｒ ｄｅｖｉｃｅｓ ｗｉｔｈ ｃｏｍｐｏｎｅｎｔ ｖｉｄｅｏ ｊａｃｋｓ．
AV Ｃｏｎｎｅｃｔ ｔｏ ａ ＤＶＤ ｐｌａｙｅｒ， Ｄｉｇｉｔａｌ Ｓｅｔ－Ｔｏｐ－Ｂｏｘ， ｏｒ ｏｔｈｅｒ ｄｅｖｉｃｅｓ ｗｉｔｈ ＡＶ ｏｕｔｐｕｔ ｊａｃｋｓ．
VGA Ｃｏｎｎｅｃｔ ｔｏ ａ ＰＣ ｏｒ ｏｔｈｅｒ ｄｅｖｉｃｅｓ ｗｉｔｈ ａ ＶＧＡ ｊａｃｋ．
AUDIO IN Ｔｒａｎｓｍｉｔ ａｕｄｉｏ ｓｉｇｎａｌｓ ｔｏ ｅｘｔｅｒｎａｌ ｄｅｖｉｃｅｓ， ｃａｎ ｂｅ ｕｓｅｄ ｗｉｔｈ ＣＯＭＰＯＮＥＮＴ ／ ＶＩＤＥＯ ＩＮ ／ ＶＧＡ
ａｎｄ ｏｔｈｅｒ ｐｏｒｔｓ．
VIDEO OUT/
AUDIO OUT Ｃｏｎｎｅｃｔ ｔｏ ｅｘｔｅｒｎａｌ ｄｅｖｉｃｅｓ ｗｉｔｈ ａｕｄｉｏ ／ ｖｉｄｅｏ ｉｎｐｕｔ ｊａｃｋｓ， ａｎｄ ｔｒａｎｓｍｉｔ ｔｈｅ ＡＴＶ ａｎｄ Ａ／Ｖ
ｓｉｇｎａｌｓ ｂｅｉｎｇ ｐｌａｙｅｄ ｔｏ ｔｈｅｓｅ ｄｅｖｉｃｅｓ．
COAXIAL Ｃｏｎｎｅｃｔ ｔｏ ｅｘｔｅｒｎａｌ ｓｐｅａｋｅｒｓ． Ｉｔ ｃａｎ ｐｒｏｖｉｄｅ ｄｉｇｉｔａｌ ａｕｄｉｏ ｓｉｇｎａｌ ｔｒａｎｓｍｉｓｓｉｏｎ．
HEADPHONE Ｃｏｎｎｅｃｔ ｔｏ ｈｅａｄｐｈｏｎｅ．
ETHERNET Ｃｏｎｎｅｃｔ ｔｏ ａ ｒｏｕｔｅｒ ｔｏ ｓｕｒｆ ｔｈｅ Ｉｎｔｅｒｎｅｔ． （Ｆｏｒ ｍｏｒｅ ｉｎｆｏｒｍａｔｉｏｎ， ｓｅｅ ＂Ｎｅｔ Ｓｅｔｔｉｎｇｓ＂ ｏｆ Ａｄｖａｎｃｅｄ
Ｆｅａｔｕｒｅｓ）
USB Ｔｈｉｓ ｓｅｔ ｈａｓ ｔｈｅ ＵＳＢ ｓｔａｎｄａｒｄ ｉｎｔｅｒｆａｃｅ， ｗｈｉｃｈ ｃａｎ ｂｅ ｃｏｎｎｅｃｔｅｄ ｔｏ ｓｔａｎｄａｒｄ ｅｑｕｉｐｍｅｎｔ ｗｉｔｈ
ＵＳＢ１．１， ＵＳＢ２．０， ＵＳＢ３．０， ｉｎｃｌｕｄｉｎｇ ｈａｒｄ ｄｉｓｋ， Ｕ ｄｉｓｋ ａｎｄ ｓｏ ｏｎ．
TF Ｉｎｓｅｒｔ ｔｈｅ ＴＦ ｃａｒｄ， ｔｈｅ ｓｕｐｐｏｒｔｅｄ ｍａｘｉｍｕｍ ｃａｐａｃｉｔｙ ｉｓ ３２Ｇ．
DEBUGGING Ｏｎｌｙ ｆｏｒ ｆａｃｔｏｒｙ ａｄｊｕｓｔｉｎｇ．
NOTES
•Some external devices are in possible insert into this set. Please replace with appropriate external signal cable or
increase the adapter to match with the port in such case.
•Illustrations for reference only.
TV Terminal
Connections
ETHERNET
COAXIAL
VGA USB HDMIVIDEO IN
COMPONENT
HEADPHONE
AUDIO OUT
AUDIO IN
AV
USB
USB
HDMI
HDMI
Antenna
VIDEO
OUT
DEBUGG-
ING
TF
VIDEO OUT ANT 75Ω HDMI 2 HDMI 1 USB 2 USB 1
DEBUGGING TF
VGAETHERNET AUDIO IN AV 1
VIDEO 2
COMPONENT HDMI 3 COAXIAL USB 3
DC 5V 0.5A(MAX)
HEADPHONE
AUDIO OUT
DC 5V 0.5A(MAX)DC 5V 0.5A(MAX)

9｜Ｃｏｎｎｅｃｔｉｏｎｓ ＵＳＥＲ ＭＡＮＵＡＬ
Ｔｈｅ ＴＶ ｍｕｓｔ ｒｅｃｅｉｖｅ ｔｈｅ ｓｉｇｎａｌ ｆｒｏｍ ｏｎｅ ｏｆ ｔｈｅ ｆｏｌｌｏｗｉｎｇ Ｓｏｕｒｃｅｓ： ａｎｔｅｎｎａ ｏｒ ＣＡＴＶ ｎｅｔｗｏｒｋ．
Ａｎｔｅｎｎａ ｓｈｏｕｌｄ ｂｅ ｐｌａｃｅｄ ａｗａｙ ｆｒｏｍ ｒｏａｄｓ， ｐｏｗｅｒ ｄｉｓｔｒｉｂｕｔｉｏｎ ｌｉｎｅｓ， ｎｅｏｎ ｓｉｇｎｓ ａｎｄ ｏｔｈｅｒ ｐｌａｃｅｓ， ｓｏ ａｓ ｔｏ ａｖｏｉｄ
ｄｉｓｒｕｐｔｉｏｎ ｏｆ ｔｅｌｅｖｉｓｉｏｎ ｓｉｇｎａｌｓ， ｔｈｉｓ ｃａｎ ｐｒｅｖｅｎｔ ａｃｃｉｄｅｎｔｓ ｆｒｏｍ ｈａｐｐｅｎｉｎｇ． Ｉｎ ａｄｄｉｔｉｏｎ， ａｓ ｌｏｎｇ－ｔｅｒｍ ｅｘｐｏｓｕｒｅ
ｏｕｔｓｉｄｅ， ａｎｔｅｎｎａ ｐｒｏｎｅ ｔｏ ｄｅｇｒａｄａｔｉｏｎ， ｉｆ ｔｈｅ ｉｍａｇｅ ｉｓ ｎｏｔ ｃｌｅａｒ， ｙｏｕ ｓｈｏｕｌｄ ｆｉｒｓｔ ｔｕｒｎ ｏｆｆ ｔｈｅ ｐｏｗｅｒ， ａｎｄ ｔｈｅｎ
ｃｈｅｃｋ ｔｈｅ ａｎｔｅｎｎａ．
Making Connections
NOTES
• When using the outdoor antenna, please unplug the cord of the indoor antenna (if any) from the antenna terminal outlet.
• It is recommended that coaxial cable (75Ω) be used to eliminate the interference caused by the mismatched impedance.
•The antenna cable should not be bound together with the power cord.
• When using the CATV or closed circuit TV, please insert the plug of the coaxial cable (75Ω).
or ANT OUT
EXTERNAL DEVICESTV JACK
ANT 75Ω
Connections
Connecting an Antenna or Cable
Ｔｈｅ ｓｅｔ ｈａｓ ＨＤＭＩ ｊａｃｋ． Ｉｔ ｃａｎ ｂｅ ｃｏｎｎｅｃｔｅｄ ｗｉｔｈ ｏｔｈｅｒ ｄｅｖｉｃｅｓ ｓｕｃｈ ａｓ ＤＶＤ， Ｓｅｔ－ｔｏｐ Ｂｏｘ， ＡＶ Ｒｅｃｅｉｖｅｒ， ＤＴＶ ａｎｄ ｓｏ ｏｎ．
Ｔｈｅ ｃｏｎｎｅｃｔｉｏｎ ｂｅｔｗｅｅｎ ｓｅｎｄｉｎｇ ａｎｄ ｒｅｃｅｉｖｉｎｇ ｅｑｕｉｐｍｅｎｔ ｄｏｎ＇ｔ ｎｅｅｄ ｓｅｐａｒａｔｅ ａｕｄｉｏ ｃａｂｌｅ．
NOTES
• Be sure the signal format are supported by
HDMI when connected with other devices(see
the table above). otherwise it may lead to the
image distortion or non-image.
• Devices with lower version may be compatible
supported by this machine, but it may not be
able to achieve the best visual effects.
• Some lower versions of the HDMI cables may
result in screen flashing or no display, it is
proposed to use the latest version (HDMI 1.3)
high-quality cables.
• If the external devices lack of HDCP or HDCP
poorly designed, it may disturb the high-
denation image presented.
• HDMI is compatible with DVI (Digital Visual
Interface). In accordance with HDCP copy-
protected requirement: Both HDMI and DVI
should support HDCP to properly view video
content. So make sure DVI in the external
devices can support HDCP.
HDMI Input
RGB/60Hz 640×480, 800×600, 1024×768
YUV/50Hz 576i, 576p, 720p, 1080i, 1080p
YUV/60Hz 480i, 480p, 720p, 1080i, 1080p
HDMI
HDMI
TV JACK
EXTERNAL
DEVICES
DVD
Set-top Box
With the HDMI Cable
Connecting an A/V Device

ＵＳＥＲ ＭＡＮＵＡＬ Ｃｏｎｎｅｃｔｉｏｎｓ ｜10
Connections
Ｃｏｎｎｅｃｔ ｔｈｅ ＴＶ＇ｓ ＡＶ１／ＶＩＤＥＯ ２ ｊａｃｋ ｔｏ ｖｉｄｅｏ ｏｕｔｐｕｔ ｊａｃｋ ｏｆ ｔｈｅ ｅｘｔｅｒｎａｌ Ａ／Ｖ ｄｅｖｉｃｅｓ （ＶＣＤ， ＤＶＤ， ＶＣＲ ｏｒ Ｃａｍｃｏｒｄｅｒ）．
Ｃｏｎｎｅｃｔ ｔｈｅ ＴＶ＇ｓ ＡＶ１／ＡＵＤＩＯ ＩＮ ｊａｃｋ ｔｏ ａｕｄｉｏ ｏｕｔｐｕｔ ｊａｃｋｓ （Ａｕｄｉｏ Ｌｅｆｔ／Ｒｉｇｈｔ） ｏｆ ｔｈｅ ｅｘｔｅｒｎａｌ Ａ／Ｖ ｄｅｖｉｃｅｓ．
Ｃｏｎｎｅｃｔ ｔｈｅ ＴＶ＇ｓ ＣＯＭＰＯＮＥＮＴ ｊａｃｋ ｔｏ ｃｏｍｐｏｎｅｎｔ ｖｉｄｅｏ ｏｕｔｐｕｔ ｊａｃｋ （Ｙ， ＰＢ， ＰＲ） ｏｆ ｔｈｅ ｅｘｔｅｒｎａｌ Ａ／Ｖ ｄｅｖｉｃｅｓ （ＶＣＤ，
ＤＶＤ， ＶＣＲ ｏｒ Ｃａｍｃｏｒｄｅｒ）．
Ｃｏｎｎｅｃｔ ｔｈｅ ＴＶ＇ｓ ＡＵＤＩＯ ＩＮ ｊａｃｋ ｔｏ ａｕｄｉｏ ｏｕｔｐｕｔ ｊａｃｋｓ （Ａｕｄｉｏ Ｌｅｆｔ／Ｒｉｇｈｔ） ｏｆ ｔｈｅ ｅｘｔｅｒｎａｌ Ａ／Ｖ ｄｅｖｉｃｅｓ．
Ｃｏｍｐｏｎｅｎｔ ｏｕｔｐｕｔ ｊａｃｋｓ ｉｎ ＶＣＤ／ＤＶＤ ｍａｙ ｂｅ ｍａｒｋｅｄ ｗｉｔｈ Ｙ， Ｂ－Ｙ， Ｒ－Ｙ ｏｒ Ｙ， ＣＢ， ＣＲ．
With the AV Cable
With the Component Cable
NOTES
•The component video signal are connected to external devices with "Comp
/ Video Adapter" provided. Please make sure that the audio connects,
otherwise the sound will be abnormal.
• The audio signal are connected to external devices with "Audio Adapter" provided.
•For video format supported by component input, refer to the table.
NOTES
• The AV1 video signal, audio L and audio R signal are connected to external devices with "AV Adapter" provided.
•The AV2 video signal is connected to external devices with "Comp / Video Adapter" provided. The audio signal are
connected to external devices with "Audio Adapter" provided. Please make sure that the audio connects, otherwise
the sound will be abnormal.
Component Input
４８０ｉ， ４８０ｐ， ５７６ｉ， ５７６ｐ
７２０ｐ／６０Ｈｚ， １０８０ｉ／５０Ｈｚ， １０８０ｉ／６０Ｈｚ，
１０８０ｐ／５０Ｈｚ， １０８０ｐ／６０Ｈｚ
DVD/VCD
Video
Camera Set-top box
Satellite Receiver
VCR
EXTERNAL DEVICES
Component
TV JACKS
Red
PR
Blue
PB
Green
Y
PR
PB
Y
White
Audio L
RedAudio R
R
L
AUDIO IN VIDEO 2
COMPONENT
EXTERNAL DEVICES
DVD/VCD
Video
Camera Set-top box
Satellite Receiver
VCR
AV 1AUDIO IN
A/V OUT
Video
Audio L
Audio R
Video
Audio L
Audio R
White
Yellow
Red
TV JACKS
Video
Video Green
Audio L
Audio R
White
Audio L
RedAudio R
VIDEO 2
COMPONENT
A/V OUT

11 ｜Ｃｏｎｎｅｃｔｉｏｎｓ ＵＳＥＲ ＭＡＮＵＡＬ
Connections
Ｔｈｅ ＴＶ ｓｅｔ ｈａｓ Ｄ－ｓｕｂ１５ ｐｉｎ ＲＧＢ ｃｏｍｐｕｔｅｒ ｓｔａｎｄａｒｄ ｊａｃｋ， ｃｏｎｎｅｃｔ ｔｈｅ ＴＶ ＶＧＡ ｊａｃｋ ｔｏ ｔｈｅ ＰＣ．
Ｃｏｎｎｅｃｔ ｔｈｅ ＴＶ＇ｓ ＡＵＤＩＯ ＩＮ ｊａｃｋ ｔｏ ａｕｄｉｏ ｏｕｔｐｕｔ ｊａｃｋｓ （Ａｕｄｉｏ Ｌｅｆｔ／Ｒｉｇｈｔ） ｏｆ ＰＣ．
Making Connections
NOTES
• The VGA audio signal are connected to
PC with "Audio Adapter" provided. Please
make sure that the audio connects,
otherwise the sound will be abnormal.
•For video format supported by VGA
input, refer to the table.
EXTERNAL
DEVICE
Connecting a PC
VGA Input
Format Resolution Frequency
ＶＧＡ ６４０×４８０ ６０Ｈｚ
ＳＶＧＡ ８００×６００ ６０Ｈｚ
ＸＧＡ １０２４×７６８ ６０Ｈｚ
Making Connections
Ｃｏｎｎｅｃｔ ｔｈｅ ＴＶ＇ｓ ＶＩＤＥＯ ＯＵＴ ｊａｃｋ ｔｏ ｖｉｄｅｏ ｉｎｐｕｔ ｊａｃｋ ｏｆ ｔｈｅ ｅｘｔｅｒｎａｌ Ａ／Ｖ ｄｅｖｉｃｅｓ （ＶＣＲ ｏｒ ＴＶ Ｍｏｎｉｔｏｒ）．
Ｃｏｎｎｅｃｔ ｔｈｅ ＴＶ＇ｓ ＡＵＤＩＯ ＯＵＴ ｊａｃｋ ｔｏ ａｕｄｉｏ ｉｎｐｕｔ ｊａｃｋｓ （Ａｕｄｉｏ Ｌｅｆｔ／Ｒｉｇｈｔ） ｏｆ ｔｈｅ ｅｘｔｅｒｎａｌ Ａ／Ｖ ｄｅｖｉｃｅｓ．
NOTES
•The audio signal are connected to external devices with "Audio Adapter" provided.
•When used as TV monitor, please read the Attention on still images of the TV carefully.
EXTERNAL DEVICES
Connecting a TV Monitor or VCR
TV Monitor
VCR
VGA VGA
TV JACKS
Audio L
Audio R
AUDIO IN
White
Audio L
RedAudio R
A/V IN
Video
Audio L
Audio R
Video
Audio L
Audio R
White
Yellow
Red
TV JACKS
VIDEO OUT HEADPHONE
AUDIO OUT

ＵＳＥＲ ＭＡＮＵＡＬ Ｃｏｎｎｅｃｔｉｏｎｓ ｜12
Connections
Ｕｓｅ ａ ｃｏａｘｉａｌ ｃａｂｌｅ ｔｏ ｃｏｎｎｅｃｔ ｔｈｅ ＴＶ＇ｓ ＣＯＡＸＩＡＬ ｊａｃｋ ｔｏ ｔｈｅ Ａｕｄｉｏ Ａｍｐｌｉｆｉｅｒ＇ｓ ｃｏａｘｉａｌ ｊａｃｋ， ｏｒ ｕｓｅ ｔｈｅ ＂Ａｕｄｉｏ
Ａｄａｐｔｅｒ＂ ｔｏ ｃｏｎｎｅｃｔ ｔｈｅ ＴＶ＇ｓ ＡＵＤＩＯ ＯＵＴ ｊａｃｋ ｔｏ ｔｈｅ Ａｕｄｉｏ Ａｍｐｌｉｆｉｅｒ＇ｓ ｃｏａｘｉａｌ ｊａｃｋ， ｔｈｅｎ ｃｏｎｎｅｃｔ ｔｈｅ Ａｕｄｉｏ
Ａｍｐｌｉｆｉｅｒ ｔｏ ｔｈｅ ｅｘｔｅｒｎａｌ ｓｐｅａｋｅｒ．
Ｗｈｅｎ ｃｏｎｎｅｃｔ ａｎ ｅｘｔｅｒｎａｌ ｓｐｅａｋｅｒ， ｔｈｅ ＴＶ ｓｏｕｎｄ ｓｅｎｄ ｔｏ ｏｔｈｅｒ ｅｘｔｅｒｎａｌ ｓｐｅａｋｅｒｓ ｔｈｒｏｕｇｈ ｔｈｅ ａｕｄｉｏ ｃａｂｌｅ，
Ｔｈｅｒｅ＇ｓ ｎｏ ｓｏｕｎｄ ｆｒｏｍ ｔｈｅ ｂｕｉｌｔ－ｉｎ ｓｐｅａｋｅｒ． Ｓｏ ｍａｋｅ ｓｕｒｅ ｔｈａｔ ｔｈｅ ｅｘｔｅｒｎａｌ ｓｐｅａｋｅｒｓ ｉｓ ｓｗｉｔｃｈｅｄ ｏｎ．
Ｂｅｆｏｒｅ ｃｏｎｎｅｃｔｉｎｇ ｅｘｔｅｒｎａｌ ｓｐｅａｋｅｒ， ｐｌｅａｓｅ ｔｕｒｎ ｄｏｗｎ ｔｈｅ ｖｏｌｕｍｅ ｏｆ ｔｈｅ ＴＶ ａｎｄ ｔｈｅ ｅｘｔｅｒｎａｌ ｓｐｅａｋｅｒ．
Making Connections
Connecting an Ex-Speaker
COAXIAL COAXIAL
TV JACK
Powerless
Bass Speaker
EXTERNAL DEVICES
Speaker
Audio Amplier
Ｗｈｉｌｅ ｔｈｅ ｈｅａｄｐｈｏｎｅ ｉｓ ｃｏｎｎｅｃｔｅｄ， ｔｈｅ ｓｏｕｎｄ ｆｒｏｍ
ｔｈｅ ｂｕｉｌｔ－ｉｎ ｓｐｅａｋｅｒｓ ｗｉｌｌ ｂｅ ｄｉｓａｂｌｅｄ．
Ｈｅａｄｐｈｏｎｅｓ ｃａｎ ｂｅ ｃｏｎｎｅｃｔｅｄ ｔｏ ｔｈｅ ＨＥＡＤＰＨＯＮＥ
ｊａｃｋ ｏｎ ｔｈｅ ＴＶ．
Making Connections
EXTERNAL DEVICETV JACK
Connecting a Headphone
Ｃｏｎｎｅｃｔ ｔｏ ｔｈｅ ＵＳＢ ｊａｃｋ ｉｎ ｔｈｅ ＴＶ ｗｉｔｈ ＵＳＢ ｃａｂｌｅ ｏｒ
ｄｉｒｅｃｔｌｙ ＵＳＢ ｐｏｒｔ．
Making Connections
EXTERNAL DEVICETV JACK
WARNING
The current should be no more than 500 mA when the single USB jack is connected with external devices, and the
total current should be no more than 1200 mA when all the USB jacks are connected with external devices. Hisense
warranty does not cover the TV damages and issues caused by the current overload.
USB
DC5V 0.5A(MAX)
Connecting a USB Device
HEADPHONE
AUDIO OUT
NOTE
When multifunction USB external device is a combination
device, it is recommended that you use USB 3 jack. (Only
USB 3 jack supports USB 3.0 devices)

13 ｜Ｃｏｎｎｅｃｔｉｏｎｓ ＵＳＥＲ ＭＡＮＵＡＬ
Ｙｏｕ ｓｈｏｕｌｄ ｃｏｎｎｅｃｔ ｔｏ ｔｈｅ ｃｏｒｒｅｓｐｏｎｄｉｎｇ ｅｑｕｉｐｍｅｎｔ ａｎｄ ｓｅｌｅｃｔ ｔｈｅ ｒｉｇｈｔ ｉｎｐｕｔ ｓｏｕｒｃｅ ｗｉｔｈ ｒｅｍｏｔｅ ｃｏｎｔｒｏｌ ｗｈｅｎ ｙｏｕ
ｗａｎｔ ｔｏ ｗａｔｃｈ ｔｈｅ ｐｒｏｇｒａｍ ｆｒｏｍ ｅｘｔｅｒｎａｌ ｄｅｖｉｃｅｓ． （Ｆｏｒ ｍｏｒｅ ｉｎｆｏｒｍａｔｉｏｎ， ｓｅｅ ＂Ｉｎｐｕｔ Ｓｏｕｒｃｅ＂ ｏｆ Ｒｅｍｏｔｅ Ｃｏｎｔｒｏｌ）
Input Jacks Input Source
ＡＮＴ ＤＴＶ
ＡＮＴ ＡＴＶ
ＶＧＡ ／ ＡＵＤＩＯ ＩＮ （ｓｈａｒｅ ｉｎｐｕｔ ｗｉｔｈ ＣＯＭＰＯＮＥＮＴ ／ ＡＶ ２） ＶＧＡ
ＨＤＭＩ１／２／３ ＨＤＭＩ１／２／３
ＡＶ１ ＡＶ１
ＶＩＤＥＯ ２ ／ ＡＵＤＩＯ ＩＮ （ｓｈａｒｅ ｉｎｐｕｔ ｗｉｔｈ ＣＯＭＰＯＮＥＮＴ ／ ＶＧＡ） ＡＶ２
ＣＯＭＰＯＮＥＮＴ ／ ＡＵＤＩＯ ＩＮ （ｓｈａｒｅ ｉｎｐｕｔ ｗｉｔｈ ＶＧＡ ／ ＡＶ ２） ＣＯＭＰＯＮＥＮＴ
Connections
Selecting the Input Source
EXTERNAL DEVICETV JACK
Connecting a TF card
Ｃｏｎｎｅｃｔ ｔｏ ｔｈｅ ＴＦ ｊａｃｋ ｉｎ ｔｈｅ ＴＶ ｗｉｔｈ ＴＦ ｃａｒｄ
（Ａｃｃｏｒｄｉｎｇ ｔｏ ｉｌｌｕｓｔｒａｔｉｏｎ： ｋｅｅｐ ｔｈｅ ｕｎｆｉｌｌｅｄ ｃｏｒｎｅｒ ｕｐ
ａｎｄ ｔｏｗａｒｄ ｔｈｅ ｊａｃｋ）．
Making Connections
TF
card
TF

ＵＳＥＲ ＭＡＮＵＡＬ Ｂａｓｉｃ Ｆｅａｔｕｒｅｓ ｜14
１．Ｕｓｅ ａｎ ＡＣ ｃｏｒｄ ｔｏ ｃｏｎｎｅｃｔ ｔｈｅ ＴＶ＇ｓ Ｐｏｗｅｒ ｉｎｐｕｔ ｊａｃｋ
ｔｏ ＡＣ ｏｕｔｌｅｔ．
２．Ｐｒｅｓｓ ｔｈｅ Power button ｏｎ ｔｈｅ ＴＶ ｓｅｔ． Ｗｈｅｎ ｔｈｅ
ＴＶ ｉｓ ｏｎ， ｐｒｅｓｓ ｔｈｅ Standby button ｏｎ ｔｈｅ ｒｅｍｏｔｅ
ｃｏｎｔｒｏｌ， ａｎｄ ｔｈｅ ＴＶ ｗｉｌｌ ｅｎｔｅｒ Ｓｔａｎｄｂｙ ｍｏｄｅ． Ｐｒｅｓｓ
ｔｈｉｓ ｂｕｔｔｏｎ ａｇａｉｎ， ａｎｄ ｙｏｕ ｃａｎ ｗａｔｃｈ ＴＶ ｎｏｒｍａｌｌｙ．
３．Ｐｒｅｓｓ ｔｈｅ Power button ａｇａｉｎ ｔｏ ｔｕｒｎ ｏｆｆ ｔｈｅ ＴＶ．
1Ｐｒｅｓｓ Setting button， ｓｅｌｅｃｔ ｔｈｅ More ｏｐｔｉｏｎ ｔｏ ｏｐｅｎ
ｔｈｅ ｍｅｎｕ．
2Ｐｒｅｓｓ ▲/
▲
/
▲
/
▲
ｔｏ ｓｅｌｅｃｔ ａ ｍｅｎｕ ｏｐｔｉｏｎ， ｔｈｅｎ ｐｒｅｓｓ OK
ｔｏ ｅｎｔｅｒ ｔｈｅ ｍｅｎｕ．
3Ｉｎ ｅａｃｈ ｌｅｖｅｌ ｏｆ ｍｅｎｕ， ｙｏｕ ｃａｎ ｓｅｌｅｃｔ ｔｈｅ ｆｏｌｌｏｗｉｎｇ
ｏｐｅｒａｔｉｏｎｓ ａｃｃｏｒｄｉｎｇ ｔｏ ｄｉｆｆｅｒｅｎｔ ｍｅｎｕｓ：
Ｐｒｅｓｓ
▲
/
▲
ｏｒ ▲/
▲
ｔｏ ｓｅｌｅｃｔ ａｎ ｉｔｅｍ
Ｐｒｅｓｓ OK ｔｏ ｃｏｎｆｉｒｍ ｏｐｅｒａｔｉｏｎ ｏｒ ｅｎｔｅｒ ｔｈｅ ｓｕｂｍｅｎｕ．
Ｐｒｅｓｓ
▲
/
▲
ｔｏ ａｄｊｕｓｔ ｔｈｅ ｖａｌｕｅ
Ｐｒｅｓｓ▲/
▲
ｔｏ ｓｅｌｅｃｔ ｔｈｅ ｉｔｅｍ
4Ｐｒｅｓｓ Return button ｔｏ ｅｘｉｔ ｔｈｅ ｃｕｒｒｅｎｔ ｍｅｎｕ．
１．Ｐｒｅｓｓ ｔｈｅ +/
-
（ｏｒ CH +/▲, CH
-
/▼） ｏｎ ｔｈｅ ｒｅｍｏｔｅ
ｃｏｎｔｒｏｌ ／ ＴＶ ｔｏ ｃｈａｎｇｅ ｔｈｅ ｃｈａｎｎｅｌ．
２．Ｐｒｅｓｓ ｔｈｅ / （ｏｒ VOL+/
▲
, VOL-/
▲
） ｏｎ ｔｈｅ ｒｅｍｏｔｅ
ｃｏｎｔｒｏｌ ／ ＴＶ ｔｏ ａｄｊｕｓｔ ｔｈｅ ｖｏｌｕｍｅ．
３．Ｐｒｅｓｓ 0~9 buttons ｏｎ ｔｈｅ ｒｅｍｏｔｅ ｃｏｎｔｒｏｌ ｄｉｒｅｃｔｌｙ ｔｏ
ｓｅｌｅｃｔ ｔｈｅ ｃｈａｎｎｅｌ．
NOTES
•In order to save power consumption, set the TV in
Standby mode if you do not watch TV for a short
time, if you do not watch TV for a very long time,
shut down the main power of the TV.
•If the TV is turned off , to turn it on again, please
wait 5 seconds at least in case the abnormal
phenomena occurred.
NOTE
Changing the channels can also be achieved by
directly pressing the programme No. If you want
to choose the programme No. from 1~9, press
Numeric buttons directly. If you want to select a
programme No. that double-digit or three-gure, the
time between twice pressing the numbers should
not be more than 3 seconds.
Menu is a easy interactive window to achieving most of the basic functions of the TV.
Basic Features
Using the TV for the First Time
Using the Menu
Turning the TV On or Off Changing the Channel and Volume
Ｗｉｚａｒｄ Ｓｗｉｔｃｈ－ｏｎ．．． Ａｃｃｏｕｎｔ Ａｐｐ Ｍａｎａｇ．．．
Ｅｃｏ Ｓｅｔｔｉｎｇ Ｍｕｌｔｉ－ｓｃｒｅｅ．．．
Ｓｅｔｔｉｎｇｓ
Ｇｅｎｅｒａｌ
Ｐｉｃｔｕｒｅ
Ｓｏｕｎｄ
３Ｄ
Ｃｈａｎｎｅｌ
Ｎｅｔｗｏｒｋ
Ｓｙｓｔｅｍ
Ａｂｏｕｔ

15 ｜Ｂａｓｉｃ Ｆｅａｔｕｒｅｓ ＵＳＥＲ ＭＡＮＵＡＬ
Basic Features
Ｗｉｚａｒｄ Ｓｗｉｔｃｈ－ｏｎ．．． Ａｃｃｏｕｎｔ Ａｐｐ Ｍａｎａｇ．．．
Ｅｃｏ Ｓｅｔｔｉｎｇ Ｍｕｌｔｉ－ｓｃｒｅｅ．．．
Ｓｅｔｔｉｎｇｓ
Ｇｅｎｅｒａｌ
Ｐｉｃｔｕｒｅ
Ｓｏｕｎｄ
３Ｄ
Ｃｈａｎｎｅｌ
Ｎｅｔｗｏｒｋ
Ｓｙｓｔｅｍ
Ａｂｏｕｔ
General Picture
Wizard: Ｙｏｕ ｃａｎ ｌｅａｒｎ ａｂｏｕｔ ｔｈｅ ｍａｉｎ ｆｕｎｃｔｉｏｎ ｏｆ
ＴＶ， ｂａｓｉｃ ｏｐｅｒａｔｉｏｎ ｍｅｔｈｏｄｓ．
Switch-on Source: Ｙｏｕ ｃａｎ ｓｅｌｅｃｔ Ｈｏｍｅｐａｇｅ ｏｒ
ｄｉｆｆｅｒｅｎｔ ｂｏｏｔ ｓｏｕｒｃｅ ｍｏｄｅ．
Account: Ｙｏｕ ｃａｎ ｍａｎａｇｅ ｔｈｅ ａｃｃｏｕｎｔ ｏｆ Ｈｉｓｅｎｓｅ．
（Ｆｏｒ ｍｏｒｅ ｉｎｆｏｒｍａｔｉｏｎ， ｓｅｅ ＂Ａｃｃｏｕｎｔ＂ ｏｆ Ａｄｖａｎｃｅｄ
Ｆｅａｔｕｒｅｓ）
App Management: Ｙｏｕ ｃａｎ ｍａｎａｇｅ ｔｈｅ ｉｎｓｔａｌｌｅｄ
ａｐｐｌｉｃａｔｉｏｎｓ．
Eco Setting:
Bright Light: Ｍａｘｉｍｕｍ ｂａｃｋｌｉｇｈｔ ｂｒｉｇｈｔｎｅｓｓ，
ｗｉｔｈ ｏｐｔｉｍｕｍ ｐｉｃｔｕｒｅ ｅｘｐｒｅｓｓｉｏｎ．
Soft Light: Ｍｉｎｉｍｕｍ ｂａｃｋｌｉｇｈｔ ｂｒｉｇｈｔｎｅｓｓ，
ｓｕｉｔａｂｌｅ ｆｏｒ ｕｓｅ ｉｎ ｎｉｇｈｔ．
Stereoscopic Frequency: Ｔｈｅ ｂａｃｋｌｉｇｈｔ ｂｒｉｇｈｔｎｅｓｓ
ｉｎｃｒｅａｓｅｓ ｗｉｔｈ ｔｈｅ ｉｎｃｒｅａｓｅ ｏｆ ｐｉｃｔｕｒｅ ｉｍａｇｅ
ｂｒｉｇｈｔｎｅｓｓ． Ｔｈｅ ｂａｃｋｌｉｇｈｔ ｂｒｉｇｈｔｎｅｓｓ ｄｅｃｒｅａｓｅｓ
ｗｉｔｈ ｔｈｅ ｄｅｃｒｅａｓｅ ｏｆ ｐｉｃｔｕｒｅ ｉｍａｇｅ ｂｒｉｇｈｔｎｅｓｓ．
Comfort Frequency: Ｔｈｅ ｂａｃｋｌｉｇｈｔ ｂｒｉｇｈｔｎｅｓｓ
ｄｅｃｒｅａｓｅｓ ｗｉｔｈ ｔｈｅ ｉｎｃｒｅａｓｅ ｏｆ ｐｉｃｔｕｒｅ ｉｍａｇｅ
ｂｒｉｇｈｔｎｅｓｓ． Ｔｈｅ ｂａｃｋｌｉｇｈｔ ｂｒｉｇｈｔｎｅｓｓ ｉｎｃｒｅａｓｅｓ
ｗｉｔｈ ｔｈｅ ｄｅｃｒｅａｓｅ ｏｆ ｐｉｃｔｕｒｅ ｉｍａｇｅ ｂｒｉｇｈｔｎｅｓｓ．
Custom: Ｔｈｅ ｆｕｎｃｔｉｏｎ ｅｎａｂｌｅｓ ａｎｙ ａｄｊｕｓｔｍｅｎｔ ｏｆ
ｂａｃｋｌｉｇｈｔ ｂｒｉｇｈｔｎｅｓｓ．
Multi-screen Service: Ｔｕｒｎ ｏｎ ｏｒ ｏｆｆ ｔｈｅ Ｍｕｌｔｉ－
ｓｃｒｅｅｎ Ｓｅｒｖｉｃｅ ｆｕｎｃｔｉｏｎ． （Ｆｏｒ ｍｏｒｅ ｉｎｆｏｒｍａｔｉｏｎ， ｓｅｅ
＂ＰＣ ｔｏ ＴＶ＂ ｏｆ Ａｄｖａｎｃｅｄ Ｆｅａｔｕｒｅｓ）
Picture Mode: Ｔｈｅ ｐｉｃｔｕｒｅ ｍｏｄｅｓ ｉｎｃｌｕｄｉｎｇ： Ｓｔａｎｄａｒｄ，
Ｓｔａｄｉｕｍ， Ｇａｍｅ， Ｃｉｎｅｍａ， Ｃｏｎｃｅｒｔ， Ｓｔｕｄｉｏ ａｎｄ Ｃｕｓｔｏｍ．
3D NR:
Ｉｔ ｃａｎ ｏｐｔｉｍｉｚｅ ｔｈｅ ｐｉｃｔｕｒｅ ｓｉｇｎａｌ ｆｒｏｍ ｔｉｍｅ
ａｎｄ ｓｐａｃｅ； ｒｅｄｕｃｅ ｔｈｅ ｏｕｔｓｉｄｅ ｎｏｉｓｅ ｉｎｔｅｒｆｅｒｅｎｃｅ
ａｎｄ ｒｅｔｕｒｎ ｔｈｅ ｐｕｒｅ ｉｎｉｔｉａｌ ｓｉｇｎａｌ．
NOTE
If the TV has no signal, this option is not available.
Zoom: Ｙｏｕ ｃａｎ ｓｅｔ ｔｈｅ ｚｏｏｍ ｍｏｄｅ： Ｆｕｌｌ Ｓｃｒｅｅｎ，
Ｓｔａｎｄａｒｄ， Ｚｏｏｍ１， Ｚｏｏｍ２， Ｓｍａｒｔ Ｚｏｏｍ ａｎｄ Ｄｏｔ Ｔｏ Ｄｏｔ．
Full screen: Ｔｈｉｓ ｓｅｌｅｃｔｉｏｎ ｗｉｌｌ
ａｌｌｏｗ ｙｏｕ ｔｏ ｖｉｅｗ ａ ｐｉｃｔｕｒｅ ｉｎ
ｆｕｌｌ ｓｃｒｅｅｎ． （Ｉｎ ＨＤＭＩ ｍｏｄｅ，
１９２０×１０８０ ｒｅｓｏｌｕｔｉｏｎ ｄｉｓｐｌａｙｓ
ｆｏｒ Ｄｏｔ Ｔｏ Ｄｏｔ）
Standard:
Ｔｈｉｓ ｓｅｌｅｃｔｉｏｎ ｗｉｌｌ
ａｌｌｏｗ ｙｏｕ ｔｏ ｖｉｅｗ ａ ｐｉｃｔｕｒｅ
ｗｉｔｈ ａｎ ｏｒｉｇｉｎａｌ ４：３ ａｓｐｅｃｔ ｒａｔｉｏ，
ｂｌａｃｋ ｂａｒｓ ｗｉｌｌ ａｐｐｅａｒ ｏｎ ｂｏｔｈ
ｔｈｅ ｌｅｆｔ ａｎｄ ｒｉｇｈｔ ｏｆ ｔｈｅ ｓｃｒｅｅｎ．
Zoom 1: Ｔｈｉｓ ｓｅｌｅｃｔｉｏｎ ｗｉｌｌ
ａｌｌｏｗ ｙｏｕ ｔｏ ｖｉｅｗ ａ １６：９ ｐｉｃｔｕｒｅ
ｗｉｔｈ ａ １４：９ ａｓｐｅｃｔ ｒａｔｉｏ． Ｂｌａｃｋ
ｂａｒｓ ｗｉｌｌ ａｐｐｅａｒ ｏｎ ｂｏｔｈ ｔｈｅ
ｌｅｆｔ ａｎｄ ｒｉｇｈｔ ｏｆ ｔｈｅ ｓｃｒｅｅｎ ａｎｄ
ｃｌｉｐｓ ｏｆｆ ｐａｒｔ ｆｒｏｍ ｔｈｅ ｔｏｐ ａｎｄ
ｂｏｔｔｏｍ．
Zoom 2: Ｔｈｉｓ ｓｅｌｅｃｔｉｏｎ ｗｉｌｌ
ａｌｌｏｗ ｙｏｕ ｔｏ ｖｉｅｗ ｔｈｅ ｐｉｃｔｕｒｅ
ｗｉｔｈｏｕｔ ａｎｙ ａｌｔｅｒａｔｉｏｎ， ｗｈｉｌｅ
ｆｉｌｌｉｎｇ ｔｈｅ ｅｎｔｉｒｅ ｓｃｒｅｅｎ．
Ｈｏｗｅｖｅｒ， ｔｈｅ ｔｏｐ ａｎｄ ｂｏｔｔｏｍ
ｏｆ ｔｈｅ ｐｉｃｔｕｒｅ ｗｉｌｌ ｂｅ ｃｒｏｐｐｅｄ．
Smart Zoom:
Ｔｈｉｓ ｓｅｌｅｃｔｉｏｎ
ｗｉｌｌ ａｌｌｏｗ ｙｏｕ ｔｏ ｖｉｅｗ ｔｈｅ
ｐｉｃｔｕｒｅ ｔｏ ｄｉｓｐｌａｙ ｔｈｅ ｅｎｔｉｒｅ
ｃｏｎｔｅｎｔｓ ｉｎ ｔｈｅ ｈｏｒｉｚｏｎｔａｌ
ｄｉｒｅｃｔｉｏｎ ｂｙ ｎｏｎ－ｌｉｎｅａｒ ｓｃａｌｉｎｇ
ｔｅｃｈｎｏｌｏｇｙ， ｔｈｅ ４：３ ｓｃｒｅｅｎ ｔｏ
ｆｕｌｌ－ｓｃｒｅｅｎ ｖｉｅｗｉｎｇ．
Dot To Dot:
Ｔｈｉｓ ｓｅｌｅｃｔｉｏｎ ｗｉｌｌ
ａｌｌｏｗ ｙｏｕ ｔｏ ｖｉｅｗ ｔｈｅ ａｃｔｕａｌ
ｓｚｉｅ ｏｆ ｔｈｅ ｐｉｃｔｕｒｅ．
NOTE
The options of the Zoom varies with different source.
Ｓｅｔｔｉｎｇｓ
Ｇｅｎｅｒａｌ
Ｐｉｃｔｕｒｅ
Ｓｏｕｎｄ
３Ｄ
Ｃｈａｎｎｅｌ
Ｎｅｔｗｏｒｋ
Ｓｙｓｔｅｍ
Ａｂｏｕｔ
Ｐｉｃｔｕｒｅ Ｍｏｄｅ ３Ｄ ＮＲ Ｚｏｏｍ Ｇｅｏｍｅｔｒｙ
Ｂｒｉｇｈｔｎｅｓｓ Ｃｏｎｔｒａｓｔ Ｃｏｌｏｒ Ｓｈａｒｐｎｅｓｓ
Ｃｏｌｏｒ Ｔｅｍｐ．．． Ｈｕｅ