Hisense HRM260N6TSE Mounting instructions

EN
USER’S OPERATION MANUAL
Before operating this unit, please read this manual
thoroughly, and retain for future reference
HRM260N6TSE
English
For questions about features, operation/performance, parts or service, call: 1-877-465-3566

Safety and warning information .....................................................................................................................
Installing your new appliance............................................................................................................................
Description of the appliance..............................................................................................................................
Display controls...........................................................................................................................................................
Using your appliance..............................................................................................................................................
Cleaning and care....................................................................................................................................................
Helpful hints and tips...............................................................................................................................................
Troubleshooting..........................................................................................................................................................
Disposal of the appliance....................................................................................................................................
3
6
13
14
19
25
27
28
32
Connecting your refrigerator to Wi-Fi ......................................................................................................... 17
Contents
Brief Introduction
For your safety and correct usage before
installing and first using the appliance,
read this user manual carefully, including
its hints and warnings.
To avoid unnecessary mistakes and
accidents, it is important to make sure
that all people using the appliance are
thoroughly familiar with its operation
and safety features. Save these
Thank you for choosing Hisense. We are
sure you will find your new refrigerator a
pleasure to use. However, before you use
the appliance, we recommend that you
carefully read the instructions, which
provide details about installing and using
the product. Please keep this manual for
future reference.
instructions and be sure that they remain
with the appliance if it is moved or sold,
so that anyone using it throughout its life,
will be properly informed on its usage
and safety notices.
For the safety of life and property, keep
the precautions of these user's
instructions as the manufacturer is not
responsible for damages caused by
omission.
2
Brief Introduction ....................................................................................................................................................... 2

General safety When positioning the appliance, ensure
the supply cord is not trapped or
damaged.
Do not locate multiple portable socket-
outlets or portable power supplies at the
rear of the appliance.
This appliance is intended to be used in
household and similar applications such
as
1. staff kitchen areas in shops, offices and
other working environments;
2.farm houses and by clients in hotels,
motels and other residential type
environments;
3.bed and breakfast type environments;
4.catering and similar non-retail
applications.
Do not store explosive substances such
as aerosol cans with a flammable
propellant in this appliance.
If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified persons in
order to avoid a hazard.
Keep ventilation openings, in the
appliance enclosure or in the built-in
structure, clear of obstruction.
Do not use mechanical devices or other
means to accelerate the defrosting
process, other than those recommended
by the manufacturer.
Do not damage the refrigerant circuit.
Do not use electrical appliances inside
the food storage compartments of the
appliance, unless they are of the type
recommended by the manufacturer.
The refrigerant and insulation blowing
gas are flammable. When disposing of
the appliance, do so only at an
authorized waste disposal centre. Do not
expose to flame.
The refrigerant isobutane (R600a) is
contained within the refrigerant circuit of
the appliance. During transportation and
installation of the appliance, ensure that
none of the components of the
refrigerant circuit become damaged. The
refrigerant (R600a) is flammable.
Refrigerators contain refrigerant and
gases in the insulation. Refrigerant and
gases must be disposed of professionally
as they may cause eye injuries or ignition.
Ensure that tubing of the refrigerant
circuit is not damage prior to proper
disposal.
Risk of fire / flammable materials If the
refrigerant circuit should be damaged:
1.Avoid opening flames and sources of
ignition.
2.Thoroughly ventilate the room in which
the appliance is situated.
It is dangerous to alter the specifications
or modify this product in any way. Any
damage to the cord may cause a short
circuit, fire, and/or electric shock.
The illumination lamps must not be
replaced by the user! If the illumination
lamps is damaged, contact the customer
helpline for assistance. This warning is
only for refrigerators that contain
illumination lamps.
Replacing the illuminating lamps
Refrigerant
Safety and warning information
3

Electrical safety
The power cord must not be lengthened.
Make sure that the power plug is not
crushed or damaged. A crushed or
damaged power plug may overheat and
cause a fire.
Make sure that you can access the main
plug of the appliance.
Do not pull the main cable.
If the power plug socket is loose, do not
insert the power plug. There is a risk of
electric shock or fire.
You must not operate the appliance
without the interior lighting lamp cover.
The fridge is only applied with power
supply of single phase alternating current
of 110~115V/60Hz. If fluctuation of voltage in
the district of user is so large that the
voltage exceeds the above scope, for
safety sake, be sure to apply A.C.
Automatic voltage regulator of more
than 350W to the fridge. The fridge must
employ a special power socket instead of
common one with other electric
appliances. Its plug must match the
socket with ground wire.
Daily use
Do not store flammable gases or liquids in
the appliance,There is a risk of an
explosion.
Do not operate any electrical appliances
in the appliance (e.g. electric ice cream
makers, mixers etc.).
When unplugging always pull the plug
from the mains socket, do not pull on the
cable.
Do not place hot items near the plastic
components of this appliance.
This refrigerating appliance is not
intended to be used as a built-in
appliance.
Do not place food products directly
against the air outlet on the rear wall.
Store pre-packed frozen food in
accordance with the frozen food
manufacturers’ instructions.
The appliances manufacturers’ storage
recommendations should be strictly
adhered to. Refer to relevant instructions
for storage.
Do not place carbonated or fizzy drinks in
the freezer compartment as it creates
pressure on the container, which may
cause it to explode, resulting in damage
to the appliance.
In order to sense the temperature and
humidity near the appliance and make
the appliance run better, add
temperature and humidity sensor outside
the box of appliance.
Frozen food can cause frost burns if
consumed straight from the freezer
compartment.
Do not place the appliance in direct
sunlight. Keep burning candles, lamps
and other items with naked flames away
from the appliance so that do not set the
appliance on fire.
The appliance is intended for keeping
food stuff and/or beverages in normal
household as explained in this instruction
booklet. The appliance is heavy. Care
should betaken when moving it.
4

Do not remove nor touch items from the
freezer compartment if your hands are
damp/wet,as this could cause skin
abrasions or frost/freezer burns.
Never use the base, drawers, doors etc. to
stand on or as supports.
Frozen food must not be refrozen once it
has been thawed out.
Do not consume ice popsicles or ice
cubes straight from the freezer as this can
cause freezer burn to the mouth and lips.
To avoid items falling and causing injury
or damage to the appliance, do not
overload the door racks or put too much
food in the crisper drawers.
Caution! Care and cleaning
Before maintenance, switch off the
appliance and disconnect the mains plug
from the mains socket.
Do not clean the appliance with metal
objects, steam cleaner, ethereal oils,
organic solvents or abrasive cleansers.
Do not use sharp objects to remove frost
from the appliance. Use a plastic scraper.
Installation Important
For electrical connection carefully, follow
the instructions given in this manual.
Unpack the appliance and check if there
are damages on it.
Do not connect the appliance if it is
damaged. Report possible damages
immediately to the place you bought it. In
this case retain packing.
It is advisable to wait at least four hours
before connecting the appliance to allow
the oil to flow back in the compressor.
Adequate air circulation should be
around the appliance, lacking this leads
to overheating. To achieve sufficient
ventilation, follow the instructions relevant
to installation.
Wherever possible the back of the
product should not be too close to a wall
to avoid touching or catching warm parts
(compressor, condenser) to prevent the
risk of fire, follow the instructions relevant
to installation.
The appliance must not be locate close to
radiators or cookers.
Make sure that the mains plug is
accessible after the installation of the
appliance.
Any electrical work required to do the
servicing of the appliance should be
carried out by qualified electrician or
competent person.
This product must be serviced by an
authorized Service Center, and only
genuine spare parts must be used:
1.If the appliance is Frost Free.
2.If the appliance contains freezer
compartment. Queensland service notes:
In Queensland, the Authorized Service
Person Must hold a Gas Work
Authorization for hydrocarbon
refrigerants to carry out servicing or
repairs which involve removal of covers.
Note：Children aged from 3 to 8 years
are allowed to load and unload
refrigerating appliances. (This clause
applies only to the EU region.)
Service
5

1/2 " Above
2" Behind
1/2" Each Side
Installing your new appliance
Warning
Ventilation of appliance
Before using the appliance for the first
time, you should be aware of the following
tips.
For proper installation, this refrigerator
must be placed on a level surface of hard
material that is the same height as the rest
of the flooring. This surface should be
strong enough to support a fully loaded
refrigerator.
The rollers, which are not casters, should be
only used for forward or backward
movement. Moving the refrigerator
sideways may damage your floor and the
rollers.
In order to improve efficiency of the
cooling system and save energy, it is
necessary to maintain good ventilation
around the appliance for the dissipation of
heat. For this reason, sufficient clear space
should be available around the
refrigerator.
Suggestion
It is advisable for there to be at least
2"(50mm) of clearance from the back of the
fridge to the wall, at least 1/2"(12mm) of
clearance from its top, at least 1/2"(12mm)
from its side to the wall and a clear space in
front to allow the doors to open 125°, as
shown in the following diagram.
6
Note
This appliance performs well with
ambient temperature between 55°F (12.8°
C) to 110°F (43.3° C). The appliance may
not work properly if left at a temperature
above or below the indicated range.
Stand your appliance in a dry place to
avoid high moisture.
Keep the appliance out of direct sunlight.
rain or frost. Stand the appliance away
from heat sources such as stoves, fires or
heaters.

Snap Ring (4pcs) Wrench(Not provided)
Adjusting Door Height And
Door Gap
1.Check the height difference between the
doors and then lift and hold the lowest
door to be even with the other.
2.Insert a suitably sized Snap Ring between
the Door and the Hinge as shown.
To Adjust The Height Of Door
Important
1.Insert only one Snap Ring. If you insert
two or more Snap Rings, they may slip out
or cause a rubbing noise.
2.Do not raise the door too much.
The door may contact and damage the
top cover.
3.Save remaining Snap Rings for possible
future use.
Warning
Contains Small Parts, Keep the Snap Rings
Away From Babies and Children
Leveling of appliance
For sufficient leveling and air circulating
in the lower rear section of the
appliance, the bottom feet may need to
be adjusted. You can adjust them
manually by hand or by using a suitable
tool.
To allow the doors to self-close, tilt the
top backwards by 0.4" - 0.6"(10 -15mm).
0.4" - 0.6" (10-15mm)
Adjustable
bottom feet
Front roller
A
B
CRear roller
A B C
Adjustable
bottom feet
7
The height of a door can be adjusted using
the provided Snap Rings. Tools you will
need:

Allen Wrench (5/32", 4mm)
Philips Screwdriver
Wrench (5/16", 8mm)
Warning
Electrical Shock Hazard Disconnect
power before removing doors.
Reconnect ground wire before
operating. Failure to do so could
result in death or electric shock.
Keep the refrigerator doors closed until you
are ready to lift them from the cabinet.
1.Unplug refrigerator or disconnect power.
2.Using a Phillips screwdriver, remove the
three screws(A) attaching the hinge cover,
and then remove the hinge cover with the
entire harnesses attached.
3. Separate the two connectors on the left
side door. To remove the wire connector,
press the top of the connector (B) and
separate it from the other one. To remove
the water coupler from the hinge, twist
and pull the clips from the coupler.
Remove the water line (C) while pressing
the movable part (D) of the water line
coupler.
4. Remove the 3 screws (E) fixed on the
hinges, with a Wrench (8mm) and 1
ground screws (F) attached to the hinge
with Philips (+) screwdriver. Remove the
upper left door hinge (G).
5. Use our both hands to open the door
more than 90°. Lift it up and take it off.
6. If necessary, remove the 2 hex head
bolts hinges (I) with an Allen wrench
(5mm). Remove the lower left door
hinge (H).
8
Door Removal
In case your home access door is too
narrow for the refrigerator to pass
through, remove the refrigerator doors
and drawers. If you do not need to
remove the appliance doors, proceed to
"Installing Water Lines" on page 10. If
you need to remove the doors, continue
below.
Tools you will need(Not provided)

Screws
7 . Pull the middle door fully open.
8 . Take out upper drawer.
9.Remove the two screws that secure
the support frame.
10 . Take out the middle door.
11 . Pull the freezer door and the freezer
drawer fully open.
12 . Take out the middle drawer.
9

13 . Take out the lower drawer.
14 . Take out the freezer door.
15 . Move your refrigerator into its final
position, then re-install the drawers and
doors by reversing these steps.
Warning
In order to ensure the self-close
mechanism works correctly, please make
sure the doors are opened more than 90
degrees when you remove or reattaching
them.
Ice & water dispenser with a filter is one
of the helpful features on your new
appliance. To help promote better
health, the water filter removes
unwanted particles from your water.
Please follow the below instructions
carefully for correct installation.
In order for the ice & water dispenser to
operate properly, a water line is
required.
-the maximum inlet water pressure is
700kPa;
-the minimum inlet water pressure is
207kPa.
Warning
The water connection must be made by
a qualified plumber. Operation outside
the water pressure range may cause
malfunction, or severe and damaging
water leaks.
Under normal conditions, a200cc (5.75
oz.) cup can be filled in about 10 seconds.
If the refrigerator is installed in an area
with low water pressure (below 30psi),
you can install a booster pump to
compensate for the low pressure.
Installing the water lines
10

What you need to have before you begin
1. First, shut off the main water supply.
Connecting to the water
supply line
45 6
1/4" extension 1 Coupler 2 Clips
tubing
4. You may need to purchase No.1, No.2,
and No.3 parts to complete connection.
You may find these items sold as a kit at
a local hardware store.
1. Power drill and 1/4" drill bit.
2. 1/2" or adjustable wrench.
3.lat blade and Philips head screwdrivers.
1 2 3
Saddle-type
Shut Off valve
(1/4" outlet)
one 1/4"
compression
1 ferrule
(sleeve)
2.Using a power drill and a 1/4" drill bit drill
into the cold-water line and connect the
saddle-type shutoff valve.
Cold water line
Pipe clamp
Shut off Valve
3.Connect 1/4" extension tubing to shut off
valve outlet.
Saddle-Type
Clip
Cold water line Cold water line
Coupler
Shutoff Valve
Packing Nut
Outllet Valve
Compression Nut
1/4" Extension
tubing
Ferrule(sleeve)
Note
Ensure that the water line does not get
pinched or bent when installing.
This can result in improper water flow
through the line and will affect the
functionality of the fridge.
4. Flush the tubing. Turn the main water
supply on and flush out the tubing until the
water is clear. Then, shut the water off at
the water valve after about a quart of
water has flushed through the tubing.
5. Connect the extension tubing line with
the line on the back of the fridge via the
coupler. Fully insert the extension tubing
into the coupler, and then insert the clip
onto the coupler to lock in the tubing. Do
the same with the other end. After both
clips are inserted, check the line to make
sure it is held firmly by the clips.
11

a b c a
b
c
Ferrule (Sleeve) -1 pcs
1/4" Compression Nut - 1 pcs
1/4" Water Line -1 pcs
Connect Water Line
to Refrigerator
Important
If you turn the refrigerator on before the
water is connected, turn off the ice maker.
c
b
a
a
e
b
d
c1/4" Water Line
1/4" Compression Nut
Ferrule (Sleeve)
Brass Fitting
Water Inlet
d
e
Note
Use only the new tubing supplied with
the refrigerator. Old tubing should not
be used. After connected to the water
supply line, please open the water
valve to flush the filter for 5 minutes
before use.
The initial dark discoloration of water is
normal.
Warning
The water line must be connected to
the cold water pipe. If it is connected
to the hot water pipe, it may cause the
purifier to malfunction.
Avoid contamination of pipes during
installation.
Connect to potable water supply only.
6. Turn the water on and check for
leakage.
1. You may need to purchase below items
to complete this connection. And you
may find these items sold as a kit at a
local hardware store.
2. Unplug refrigerator or disconnect
power.
3. Close shutoff value.
4. Thread a 1/4 " compression nut and
ferrule (sleeve) onto the free end and of
1/4" water line.
5. Insert the free and of the 1/4" water line
into the brass fitting attached to the
water inlet on the back of the refrigerator.
6. Slide the 1/4" compression nut over the
ferrule (sleeve) and screw the 1/4"
compression nut onto the brass fitting.
7. Comfirm 1/4" water line is secure by
gently pulling on it.
8. Turn on water supply and check for
leaks. Correct any leaks
12

Note：Due to constant development of our products, your refrigerator may
be slightly different from this instruction manual, but its functions and usage
remain the same.
Note：To get the best energy efficiency of this product, please place all
shelves, drawers on their original position as the illustration above.
View of the appliance
01
02
04
06
07
08
09
11
13
12
05
03
10
Description of the appliance
13
14
15
16
17
18
01. Wi-Fi Module
02. Refrigerator LED Light
03. Water Filter
04. Refrigerator Door Bin
05. Ice-Maker
06. Mullion
13. Freezer Lower Drawer
14. Fridge Door Left
15. Fridge Door Right
16. VersaTemp Door
17 . Freezer Door
18. Leveling Leg
07 . Glass Shelf
08. Refrigerator Side Light
09 . Storage Drawer
10. Middle Storage Drawer
1 1. VersaTemp Drawer
12. Freezer Upper Drawer

Your product has one control panel which is installed on the refrigerator door. Use
your appliance according to the following control guidelines.
Display controls
14
The display will illuminate when the
refrigerator is first plugged in. However
the lights will automatically turn off
after 60 seconds.
“Child Lock and Door Alarm”
This button serves two purposes:
1. Child Lock
Press and hold "Alarm" for 3 seconds to
lock the whole Control Panel including
dispenser function. If Control panel is
locked, the icon " " will be on, and
none of the buttons on the Control
panel work. To unlock the Control panel,
please press and hold "Alarm" for 3
seconds again.
2. Door Alarm
Leaving any door open for over 2
minutes will activate door alarm. The
icon " " will flicker, the control panel
will display " dr", and you will hear a
buzzer sound. The buzzer will sound 3
times per minute and will stop after
8 minutes. In case of alarm, you can
touch the Alarm button to cancel door
alarm, then the icon " " stops
flickering and keeps on, the buzzer
sound will stop at the same time. Also
door alarm can be stopped by closing
all the doors. To save energy, please
avoid keeping doors open for a long
time when using refrigerator.
“Ice Control”
You can touch "Ice Off" button to control
the ice maker. When the Child Lock is off,
you can touch the "Ice Off" icon to lock
the ice maker, and the icon " " will be
illuminated. If you want to unlock the ice
maker, please touch the "Ice Off" button
again, and the icon " " will be off.
Note:
When the "Ice Off" is on, it only locks the
ice maker not the dispenser.

15
Control”
When you touch the button
continuously, the temperature will be
set in the following sequence.
“Fridge Temperature
46°F 45°F 44°F 43°F
36°F 37°F 38°F......
8°C 7°C 6°C 5°C
2°C 3°C 4°C
If you want to decrease the time
needed to cool items in the Fridge,
please touch and hold this button for 3
seconds, the Super Cool icon " " will
be illuminated, the fridge temperature
setting will display 36°F(2°C). Super Cool
automatically switches off after 3 hours,
and the refrigerator temperature
setting will revert back to the previous
setting. When Super Cool function is on,
you can touch the "Fridge" to switch it
off.
Note:
On the Super Cool Function, when you
touch the "Eco" button, Eco function will
be activated, and "Super Cool" mode
will be off.
“Freezer Temperature
Control”
You can touch the "Freezer" button to
activate the mode to control the freezer
temperature. When you press the
button continuously, the temperature
will be set in the following sequence.
5°F 6°F
7°F
-24°C -23°C -22°C
......
......
-11°F -10°F -9°F
-14°C -15°C -16°C
Press and hold the button for 3 seconds,
the icon " " will be illuminated, the
freezer temperature setting will display -
11°F(-24°C). Super Freeze can quickly
lower the temperature and freeze your
food faster than usual. This can retain
more of the vitamins and nutrition in
fresh food and keep your food longer.
Super Freeze automatically switches off
after 52 hours, and the freezer
temperature setting will revert back to
the previous setting. When the Super
Freeze function is on, you can touch
"Freezer" to switch off the Super Freeze
function. The Super Freeze is used to
perform pre-freezing and fast freezing
in sequence of Freezer compartment.
This function accelerates the freezing of
fresh food and, at the same time,
protects foodstuffs already stored from
undesirable warming.
To freeze fresh food activate the
Super Freeze function at least 24
hours before placing the food to
complete pre-freezing.
On the Super Freezer Function,
when you touch the "Eco" button,
Eco function will be activated,
and "Super Freezer" mode will
be off.
Note

-1°C
-2°C
-3°C
41°F 40°F 39°F ......
27°F 28°F 29°F
5°C 4°C 3°C ......
When the Child Lock is on, the dispenser
will not work. When the Child Lock is off,
you can press the "Cubed" or "Crushed”
option to choose the type of ice to be
dispensed, and press the "Water" button
will activate the water mode. If you
choose the function of Cubed, the " "
icon will be illuminated, choose the
fuction of Crushed the " " icon will be
illuminated, and the " " icon will be
illuminated when Water function is
chosen.
“Dispenser
Control”
When the Child Lock is off, you can
touch the"°F/°C" button to switch
between Celsius and Fahrenheit units.
The default state is Fahrenheit display.
When it is switched to Fahrenheit, the
icon " " will be on.
“ °F/°C ”
You can touch this button to turn
Energy Save mode on and off. When
you turn Energy Save on, the Eco icon
" " lights. The temperature of the
fridge is automatically switched to
43°F(6°C) and the freezer to 1°F(-17°C). If
Energy Save is off, the icon " " will go
off and the temperature setting will
revert back to the previous setting.
“ECO/Energy Saving”
16
“VersaTemp”
You can touch the "VersaTemp" button
to activate the mode to control the
convertible compartment temperature.
When you press the button
continuously, the temperature will be
set in the following sequence.
“Water Filter”
In general, you should change the
water filter every 6 months to ensure the
highest possible water quality.
After the refrigerator has dispensed
about 200 gallons of water, the filter
icon " " will blink, reminding you to
replace the water filter.
You can purchase the new filter from
the retailer where you purchased your
refrigerator or the Hisense after-sales
service system. Make sure that the new
filter is the same filter type that came
with your fridge and can be correctly
used in your refrigerator. After you
change the water filter, touch and hold
the "Eco" buttons for 3 seconds to make
the blinking stop.
“Demo Mode”
Demo mode is for store display, and it
prevents the refrigerator from
generating cool air. In this Demo Mode,

the refrigerator may seem like it is
working but it will not make cool air.
The indicators on the control panel will
show "0F". To cancel this mode, touch
and hold "Alarm" and "°F/°C" buttons at
the same time for 3 seconds until the
buzzer beep a long sound.
Connecting your refrigerator to Wi-Fi
17
ConnectLife app
ConnectLife is a smart home app that
allows you to communicate with your
smart appliances using a smartphone
or tablet.
Installation
1. Open the Apple App Store (iOS) or
the Google Play Store (Android) on
your smartphone.
2. Search for the “
ConnectLife” app.
You will see an app with the
following icon
：
3. Download and install the ConnectLife
app provided by ConnectLife, LLC.
Alternatively, you can scan the following
QR code with your smartphone or tablet
to find the ConnectLife app：
Note
•
•
•
•
The distance between your
appliance and the Wi-Fi router can
impact the performance. If they are
too far apart, pairing your appliance
might fail or take longer.
The appliance supports 2.4 GHz Wi-Fi
networks only. The Wi-Fi network SSID
must be visible.
• ConnectLife versions above 1.3.7
support the Wi-Fi function of the
refrigerator. If you use the old
version, you need to download and
install the latest ConnectLife from
the Store.
The surrounding wireless environment
(other connected devices) can affect
the performance of your network.
Your appliance Wi-Fi connection
may experience interruptions due to
external factors such as your home
network environment or Internet
service provider.

2. Put the refrigerator in pairing
mode by holding the button℉/℃
for 3 seconds. You will hear a
beep and see the Wi-Fi light
following icon：
Note
4.
5.
•The appaliance will remain in
pairing mode for a maximum of 5
minutes.
•To factory reset your network
settings, press & hold the ℉/℃
button for 6 seconds. You will hear
two beeps once the appliance is
reset.
•
•
Follow the instructions in the app
to connect your refrigerator.
Once the setup is complete, your
refrigerator will appear on your
home screen.
After resetting, the appliance will
automatically go into pairing mode.
A solid Wi-Fi light indicates the
appliance is successfully connected
to the home network.
3.
If a pop-up doesn't appear, tap
the button called "Add appliance"
or "+" in the app.
Locate "Refrigerator" in the device
list and select it.
6.
Ensure Bluetooth is enabled on
your phone and open the
ConnectLife app. Look for the
pop-up indicating that a new
appliance has been found. Tap
the button on the pop-up and
follow the instructions to
proceed.
1. Ensure the appliance is powered on
and the control panel is active. You
will know it is ready when the lights
that indicate temperature are on.
Connecting your refrigerator
After installing the Connectlife app,
sign in or create an account and
follow these steps:
18

The refrigerator compartment is
suitable for storage of vegetables
and fruit. Food inside should be
sealed for storage in order to avoid
losing moisture or flavor permeating
into other foods.
Caution!
Never close the refrigerator door
while the shelves, crisper and/or
telescopic slides are extended. It
may damage both them and the
refrigerator.
The four doors can be opened and
closed either separately or together.
There is a mullion on the left-hand
side refrigerator compartment door.
When closing the left-hand door ,the
mullion folds behind the right-hand
door joining the two doors.
The temperature of the door frame is
controlled to help prevent moisture
from developing on the mullion. The
temperature of the surface may be
warm, which is normal, and will not
affect the performance of the
refrigerator.
Using your fridge compartment
The refrigerator compartment is
provided with six door bins, which are
suitable for the storage of canned
liquid, bottled drinks and packaged
food. To remove the door, simply
lift the racks up and pull straight out. To
relocate the door , slide it in above the
desired location and push down until it
stops.
Door Bins
Before closing the left-hand door,
make sure the mullion is folded
inward. If the mullion is pulled
outward it may become
damaged when you try to close
the door.
Do not place too many heavy
things in the baskets. Before you tilt
up the door shelf vertically, please
take the dood out.
Note
Warning
Opening and Closing Doors
Using your appliance
19

The height of the shelves can be
adjusted to fit your storage needs.
1. To remove the glass shelves. Tilt up
the front of the shelf in the direction
shown (1) and lift it up vertically (2).
Pull the shelf out.
Adjustable Shelves
2. To re-install the glass shelves, tilt
the front of the shelf up and guide
the shelf hooks into the slots at a
desired height(1).Then lower the front
of the shelf so that the hooks can
drop into the slots (2).
Removing/Replacing freezer drawer
Unscrew the drawer before taking
it out.
1. Pull out drawer to maximum
extension.
2. Lift up to remove the drawer.
3. Reverse steps 1 and 2 to replace
the drawer.
Note
Push the appropriate ice or water
type button to select what you want
to dispense.
Getting Cold Water and Ice
The water dispenser is located in the
fridge door. To get water, push the
water button. Then move your glass
down to the dispenser lever (A) at
below suggested position and press
it.
Getting Cold Water
To get ice, push the cubed or
crushed ice button as required.
Then move your glass down to the
dispenser lever(A) at below
suggested position and press it.
Getting Cubed & Crushed Ice
20