Hisense 75U80G User manual

English
ES-G
QUICK SETUP GUIDE
Before using the TV, please read this guide thoroughly
and retain it for future reference. For more detailed
instructions, please see the User Manual or the E-manual.

A
Declaration

B
Important Safety Precautions
This symbol alerts user about the
presence of a dangerous voltage not
isolated inside the product which can
be sufficiently powerful to constitute a
risk of electrocution.
This symbol alerts user about the
presence of important operating
instructions and maintenance in the
document enclosed in the package.
Disposal of Used Electrical & Electronic Equipment
ATTENTION
RISK OF SHOCK
ELECTRIC
Packaging and electrical goods should be recycled appropriately, and
not treated as household waste. Please dispose of this equipment at
your applicable collection point for the recycling of electrical & electronic
equipment waste. By ensuring the correct disposal of this product,
you will help prevent potentially hazardous to the environment and to
human health, which could otherwise be caused by unsuitable waste
handling of this product. The recycling of materials will help conserve
natural resources. Please do not therefore dispose of your old electrical
and electronic equipment with your household waste. For more detailed
information about recycling of this product, please contact your local city
office, your household waste disposal service or the shop where you
purchased the product.
Do not open the back cover.
In no case the user is allowed to operate
inside the TV set. Only a qualified
technician is entitled to operate.
AC voltage: This symbol indicates that the rated voltage marked with the
symbol is AC voltage.
Class I product: This symbol indicates that it requires a safety connection of
protective earthing (ground).

C
Important Safety Precautions
Warning
Never place a television set in an unstable location. A television set may fall, causing
serious personal injury or death. Many injuries, particularly to children, can be avoided
by taking simple precautions such as:
Using stands recommended by the manufacturer of the television set.
Only using furniture that can safely support the television set.
Ensuring the television set is not overhanging the edge of the supporting furniture.
Not placing the television set on tall furniture (for example, cupboards or
bookcases) without anchoring both the furniture and the television set to a suitable
support.
Not placing the television set on cloth or other materials that may be located
between the television set and supporting furniture.
Educating children about the dangers of climbing on furniture to reach the television
set or its controls.
If your existing television set is being retained and relocated, the same considerations
as above should be applied.

D
Important Safety Precautions
Safeguards
Please read the following safeguards for your TV and retain for future reference.
Always follow all warnings and instructions marked on the television.
1. A note about safety and operating instructions
Read and follow all safety and operating instructions, and retain them safely for future
reference.
2. Heed Warnings
Adhere to all warnings on the appliance and in the operating instructions.
3. Cleaning
Unplug the TV from the wall outlet before cleaning. Do not use liquid, abrasive, or
aerosol cleaners. Cleaners can permanently damage the cabinet and screen. Use a
lightly dampened cloth for cleaning.
4. Wall Mount Bracket
Wall mount bracket is only available for some models. If wall mount bracket is not
supplied with this product, you can buy it at the local market.
Please refer to the Installing the Wall Mount Bracket page of Quick Setup Guide for
dimensions.
5. Water and Moisture
Avoid dripping or splashing of liquids onto the product. Objects filled with liquids, such
as vases, should not be placed on the product.
6. Setting
Do not place this TV on an unstable cart, stand or table. Placing the TV on an unstable
base can cause the TV to fall, resulting in serious personal injuries as well as damage
to the TV. Use only a cart, stand, bracket or table recommended by the manufacturer
or salesperson.
7. Ventilation
Slots and openings in the cabinet are provided for ventilation, to ensure reliable
operation of the TV and to protect it from overheating. Do not cover the ventilation
openings in the cabinet and never place the set in a confined space such as built-in
cabinet unless proper ventilation is provided. Leave a minimum 10cm gap all around
the unit, the rear of the TV should be 6cm away from the wall.
8. Power Source
This TV should be operated only from the type of power source indicated on the
marking label. If you are not sure of the type of power supplied to your home, consult
your appliance dealer or local power company.

E
Important Safety Precautions
9. Power-Cord Protection
Power- supply cords should be routed so that they are not likely to be walked on or
pinched by items placed upon or against them, paying particular attention to cords at
plug, wall outlets, and the point where they exit from the TV. MAIN plug is used as the
disconnect device, the disconnect device shall remain readily operable.
10. Lightning
For added protection for this TV during a lightning storm, or when it is left unattended
and unused for long periods of time, unplug it from the wall outlet and disconnect the
antenna or cable system. This will prevent damage to the TV due to lightning or power-
line surge.
11. Power Lines
An outside antenna system should not be located in the vicinity of overhead power
lines or other electric light or power circuits, or where it can fall into such power lines or
circuits. Where installing an outside antenna system, extreme care should be taken to
keep from touching such power lines or circuits as contact with them might be fatal.
12. Overloading
Do not overload wall outlets and extension cords as this can result in a risk of fire or
electric shock.
13. Object and Liquid Entry
Never push objects of any kind into this TV through openings as they may touch
dangerous voltage points or short-out parts that could result in fire or electric shock.
Never spill liquid of any kind on or into the TV.
14. Outdoor Antenna Grounding
If an outside antenna or cable system is connected to the TV, be sure the antenna or
cable system is grounded so as to provide some protection against voltage surges and
built-up static charges.
15. Servicing
Do not attempt to service this TV yourself as opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all servicing to qualified service
personnel.
16. Damage Requiring Service
Unplug the TV from the wall outlet and refer servicing to qualified service personnel
under the following conditions:
(a) When the power - supply cord or plug is damaged.
(b) If liquid has been spilled, or objects have fallen into the TV.
(c) If the TV has been exposed to rain or water.

F
Important Safety Precautions
(d) If the TV does not operate normally by following the operating instructions. Adjust
only those controls that are covered by the operating instructions as an improper
adjustment of other controls may result in damage and will often require extensive
work by a qualified technician to restore the TV to its normal operation.
(e) If the TV has been dropped or the cabinet has been damaged.
(f) When the TV exhibits a distinct change in performance - this indicates a need for
service.
17. Replacement Parts
When replacement parts are required, be sure the service technician has used
replacement parts specified by the manufacturer or have the same characteristics as
the original part. Unauthorized substitutions may result in fire, electric shock or other
hazards.
18. Safety Check
Upon completion of any service or repair to the TV, ask the service technician to
perform safety checks to determine that the TV is in safe operating condition.
19. Heat
The product should be situated away from heat sources such as radiators, heat
registers, stoves, or other products (including amplifiers) that produce heat.
20. Fire
The product should be situated away from naked flame sources such as lighted candle.
21. Off-gassing
The TV smells of plastic is normal and will dissipate over time.
To fully disconnect the TV, remove power plug from wall socket. Be sure
to have the wall socket and power plug readily accessible.
Do not mix and use new batteries with old batteries, or batteries with
different types. Do not expose batteries to heat such as direct sunlight or
fire. Make sure the batteries' positive and negative ends are facing the
correct direction.
The device should not be exposed to dripping and spraying and it cannot
be placed under objects filled with liquids.
Apparatus with CLASS I construction shall be connected to a MAINS
socket outlet with a protective earthing connection.

1
Contents
Contents
Figures and illustrations in this manual are provided for reference only and may
differ from actual product appearance.
Parts of the software function changes with the system upgrade.
Accessories List............................................................................................................. 1
Installing the Stand........................................................................................................ 2
Installing the Wall Mount Bracket .................................................................................. 3
TV Front......................................................................................................................... 5
TV Rear ......................................................................................................................... 6
Making Connections...................................................................................................... 7
Remote Control ............................................................................................................11
Turning the TV on for the First Time............................................................................ 15
Specifications .............................................................................................................. 16
Other Information......................................................................................................... 17
Accessories List
The following accessories are included with TV:
Quick Setup Guide × 1 Installing Instructions × 1 Remote Control × 1
Base Stand × 2 RCA jack to AV Cable× 1 Power cord × 1
Cover × 1 AAA Battery × 2 Screw × 4
The accessories may be different from the list above due to different models, countries/regions,
please refer to the actual accessory bag.
Installing Instructions

2
Installing the Stand
Installing the Stand or Wall Mount Bracket
CAUTION
Be sure to disconnect the AC power cord before removing a base stand or installing
wall mount brackets.
The display on your TV is fragile. Make sure the TV screen is not scratched or
damaged by hard objects or from pressure.
After the installation is complete, make sure the TV is steady on a table or firmly
attached to a wall mount, before removing all protective film, if any.
1. Carefully place your TV back down on a flat surface to prevent damage to the TV.
2. Take out the 2 stands from the accessory bag and then insert the stands into the
bottom slots of the TV.
Tip: Make sure to insert the stands according to the 'L' and 'R' directional marks
that are shown on the surface.
3. Secure the Base Stand to the TV with the 4 screws in the accessory bag tightly.
Follow the illustrations and textual instructions below to complete the installation steps:
Base Stand
Screws:
M5×16 Base Stand
Screws:
M5×16

3
Installing the Stand or Wall Mount Bracket
Wall-Mount hole pattern (mm) 600 × 400
Wall-Mount screw size M8
Installing the Wall Mount Bracket
Before you begin the installation of the wall mount bracket , be sure to do the following
things:
1. Place the TV in the bottom tray.
2. One person holds the TV to prevent from tipping over. Other person removes the
screws on the back of the TV, as shown in the picture below.
CAUTION
When mounting the TV on a wall, follow instructions provided with the wall mount bracket. If
it is not correctly mounted, the TV may fall and cause property damage or personal injury.
Place spacers between the TV and bracket.
Make sure the tilt angle between the TV screen and the
vertical surface is no more than 15 degrees.
Standard dimensions are shown below.
≤15°
TV screen
Vertical
surface
Bottom tray
Screw
Screw
Screw
Screw

4
NOTE
The diameter and length of the screws differ depending on the wall mount bracket
model.
Wall mount bracket is optional, your device may not have wall mount bracket, please
refer to the actual accessories.
9.5~11.5mm
Wall Mount Bracket
Wall Mount Screw
Wall Mount Spacer
Rear cover of the TV
Installing the Stand or Wall Mount Bracket
Bottom tray

5
TV Front
TV Front
NOTE
Powering on the TV requires several seconds to load program. Do not rapidly turn
the TV off as it may cause the TV to work abnormally.
The far-field Google Assistant and some of its features are only available in
selected countries, regions and languages.
Power indicator/Remote sensor
TV back view
Joystick button
The far-eld indicator lights
Item Description
Remote sensor Receive remote signals from the remote control.
Do not put anything near the sensor, as its function may be affected.
Power indicator The light is off when the TV is turned on. The light is white in
standby mode.
The far-
field Google
Assistant
control button
Switch the button to to turn on the Google Assistant.
Say “OK Google” to start a conversation.
Before using this function, connect the TV to the Internet and
sign in your Google account.
Select among the different input signal sources or put the TV in
standby mode, or you can turn on the TV when the TV in standby
mode.
Toggle the OK button left and right to adjust the volume.
Toggle the OK button up and down to select the channel.
MIC
Bluetooth Pairing
The far-eld Google Assistant control button

6
TV Rear
TV Rear
AC Input
NOTE
Check the jacks for position and type before making any
connections. Loose connections can result in image or color
problems. Make sure that all connections are tight and secure.
The TV may not be compatible with all external devices. To check
compatibility, please refer to the user manual of external device.
Do not connect external equipment while TV's power cord is
plugged in. It may cause electric shock.
Service jack is not available for you to connect an external device.
It can only be used by our factory for testing purposes.

7
Making Connections
ANT Connect an outdoor VHF/UHF antenna or cable.
TV JACK
Outdoor
Antenna
Antenna Cable (75Ω)
or ANT OUT
Cable
VHF/UHF Antenna
ANT
(not included)
HDMI / AV
Connect a HDMI / AV cable from an external AV equipment. No sound connection
is needed for HDMI to HDMI connection. If the signal resolution does not match the
specification table, you need to change the setting of device according to the table.
Please consult your device user manual for instruction.
·To select the HDMI / AV
Press the INPUT button, when the list of input Source appears, press the
/ / < / >
buttons to select the source HDMI / AV, then press the OK button to connect.
BETTER (HDMI)
Video Effect:
Video Camera/
Set-top Box/
Satellite Receiver
TV JACK
(Cables are not included)
Red(R)
GOOD (AV)Video Effect:
TV JACK
HDMI cable (not included)
HDMI
White(L)
Yellow(Video)
AV IN
NOTE
In order to ensure performance and compatibility, new Ultra-High Speed HDMI Cables
are required to enable 8K@60Hz or 4K@120Hz on HDMI 3/4.

8
Making Connections
DIGITAL AUDIO OUT Connect to an external digital audio system.
Before connecting a digital audio system to the DIGITAL AUDIO OUT jack, you
should decrease the volume of both the TV and the system to avoid that the
volume suddenly becomes bigger.
TV JACK
DIGITAL AUDIO cable (not included)
Audio Amplier/Speaker
HEADPHONE Connect Headphone for audio out of the TV.
TV JACK
Headphone (not included)
HEADPHONE
ATTENTION
Excessive sound pressure from
earphones and headphones can
cause hearing loss.
NOTE
Please make sure that the headphone you plug in is without microphone function, or it
may not be supported.
eARC/ARC Connect an HDMI cable from an external digital audio system.
eARC/ARC enables the TV to directly output the digital sound through an HDMI
cable. Please note that it works only when the TV is connected to the audio receiv-
er that supports the eARC/ARC (Audio Return Channel) function.
When this port is used as the eARC/ARC function, it can't be used as signal input
at the same time.
TV JACK
HDMI cable (not included)
HDMI
Audio Amplier/Speaker
DIGITAL
AUDIO OUT
eARC/ARC
HDMI

9
Making Connections
LAN (Wired setup)
Connect your TV to your network by connecting the LAN port on the back of your
TV to an external modem or router using a LAN (Ethernet/Cat 5) cable. See the
illustration below.
·We recommend you to use a modem or router that supports Dynamic Host
Configuration Protocol (DHCP). Modems and routers that support DHCP
automatically provide the IP address, subnet mask, gateway, and DNS, so you
don’t have to enter them manually. Most home networks already have DHCP.
TV JACK
Modem CableLAN CableLAN Cable
External Modem
(ADSL / VDSL / Cable TV)
IP Sharer (Router)
(with DHCP server)
LAN
USB
Connect the USB1.1 and USB2.0 devices such as hard drives, USB sticks and
digital cameras for browsing photos, listening music and watching movies.
NOTE
When connecting a hard disk or a USB hub, always connect the mains adapter of
the connected device to the power supply. If a USB 1.1 or USB2.0 device requires
more than 500mA or 5V, the USB device may not be supported. Max supported
current for USB 3.0 device is 1A (only for some models). Exceeding the max
supported current may result in damage or data loss.
Certain digital cameras may not be compatible with the TV.
TV JACK
DC 5V 1A(MAX)
USB 1 USB 2
DC 5V 0.5A(MAX)

10
Making Connections
Wireless setup
Connect your TV to your wireless network, you need a wireless router or modem.
See the illustration below.
·The TV’s built-in Wireless LAN Adapter supports the IEEE 802.11 a/b/g/n/ac
communication protocols.
Wireless router with DHCP
LAN Cable
Wireless LAN Adapter
built-in TV set
NOTE
You must use the built-in Wireless LAN Adapter to use a wireless network because
the set doesn’t support external USB network adapter.
If the wireless router supports DHCP, your TV can connect more easily to the
wireless network.
If you apply a security system which is not listed below, it will not work with the TV.
Security system : WPA, WEP, WPA2.
In order to guarantee smooth network, the distance between router and TV should be
less than 10 meters.

11
Remote Control
NOTE
The included remote control will vary depending on model, country. Check information
according to the actual remote control in the accessory bag.
Display the Electronic
Program Guide (DTV mode)
Select input sources
OK / Display the on-screen
keyboard
Power Standby button:
Power on / Standby
Select a channel or input
numbers
D-pad (up / down / left /
right navigation buttons)
Under the Menu or App,
return to the previous
place
Adjust the volume
Display the Home screen
Switch channel
Mute and restore sound
Special function buttons
Display the channel
list on the screen
Playpad keys
Display the present
program information
Quick access buttons to
apps
Quick setup
Turn on/off the teletext
function Display subtitles in the
Live TV
Google Assistant of TV
Microphone
/ Power indicator
Fast access to all
applications

12
Remote Control
Using the Google Assistant
Pairing the Remote Control (only for bluetooth remote control)
1. Pair the remote to the TV after you power it on. Keep the remote control within 3
metres from the TV. Press and hold the button at least 3 seconds to start pairing.
2. If the remote paired successfully then a confirmation will display on the screen. If it
did not pair successfully then an 'unsuccessful' message will display. Repeat step 1.
NOTE
If an unknown error occurred with the remote then it could have been caused by
interference. Try to remove what's causing the interference and pair it again.
If an unknown error occurred in the remote control while the battery power is normal, you
can take out the batteries, press any key for 1~2 seconds, and insert them back. then the
remote control will work normally.
The remote cannot be paired to the TV while the TV is in standby mode.
You can ask for information, search for your favourite movies, control your TV and
more, just by asking Google Assistant.
Before using this function, pair the remote control to the TV and connect the TV to the
Internet.
Set up your Google Assistant
1. On your remote control, press the Assistant button.
2. On your TV screen, an introduction will appear. Follow the steps to finish setup.
Talk to your Google Assistant
1. Press button on your remote control, the blue light on the remote control lights
up, and the microphone is active.
2. Say a command immediately, such as saying "What can you do?". Search results
will be displayed at the bottom of the screen.
NOTE
This function is available for remote controls that have a button.
Some functions may not be supported if you are not signed in to your Google account.
The Google Assistant function only supports some languages, and the supported
functions may differ depending on countries/regions.
You can download and install the Google Assistant app on your mobile device to use
your voice.

13
Remote Control
Installing Batteries in the Remote Control
NOTE
Product image is only for reference, actual product may vary in appearance.
Dispose of your batteries in a designated disposal area. Do not throw the batteries into fire.
Do not mix battery types or combine used batteries with new ones.
Remove depleted batteries immediately to prevent battery acid from leaking into
the battery compartment.
If you do not intend to use the remote control for a long time, remove the batteries.
Batteries should not be exposed to excessive heat, such as sunshine, heat
registers, or fire.
Battery chemicals can cause a rash. If the batteries leak, clean the battery
compartment with a cloth. If chemicals touch your skin, wash immediately.
1. Press the switch and the battery case will pop up
automatically.
2. Insert two AAA size batteries. Make sure to match
the (+) and ( - ) ends of the batteries with the (+)
and ( - ) ends indicated in the battery compartment.
3. Push the battery case back to the remote control.