Hit-Not HN-RF User manual

US7,420,471; US8,169,335; US8,232,888; US5,939,986;
US6,810,353; AU2005289704; ZA2007/02919; ZA2008/02673;
ZA2010/06816, ZA2010/09068 Patent Pending
1
HIT-NOT Proximity System
Exhibit: 9
RF Module
User’s Manual v1.0
FREDERICK ENERGY PRODUCTS, LLC
1769 Jeff Road
Huntsville, AL 35806
1.800.489.6915

US7,420,471; US8,169,335; US8,232,888; US5,939,986;
US6,810,353; AU2005289704; ZA2007/02919; ZA2008/02673;
ZA2010/06816, ZA2010/09068 Patent Pending
2
Table of Contents
1. Overview............................................................................................................3-5
1.1 Theory of Operation................................................................................3
1.2 Frequency of Operation… .......................................................................3
1.3 Label Information ...................................................................................3
1.4 FCC/IC Information ................................................................................ 4-6
2. Operation........................................................................................................... 7-8
2.1 Installation Information…........................................................................7
2.1.1 Interoperability Warning................................................................... 7
2.2 Charging…...............................................................................................7
2.3 Alerts… ...................................................................................................7
2.4 Maintenance…........................................................................................7
2.5 Adjustments….........................................................................................7
2.6 Interferences….......................................................................................... 7
2.7 Module Specifications… ..........................................................................8
3. Revision History….................................................................................................8

US7,420,4
w
71;
w
US8
w
,16
.
9
h
,3
i
3
t
5;
n
U
o
S8
t
,2
.
3
c
2,8
o
88
m
; US5,939,986;
US6,810,353; AU2005289704; ZA2007/02919; ZA2008/02673;
ZA2010/06816, ZA2010/09068 Patent Pending
3
1Overview
The Radio Transceiver Module (RF Module) is a daughter board device that is mounted
internally to the Magnetic Field Generator (MFG)/ Collision Avoidance Module (CAM) stack. It
uses a Linx ANT-916-WRT-UFL antenna to send and receive messages to/from other HitNot
Devices.
1.1 Theory of Operation
The Radio Transceiver Module (model HN-RF) is a modular device that mounts inside the Magnetic Field
Generator (MFG). The module mounts via a 16-pin header and is secured in place with a through hole
screw and nylon insert nut. A whip antenna mounted to the lid of the MFG connects to the antenna port of
the RF module allowing it to send and receive messages to other HitNot Devices.
1.2 Frequency of Operation
The RF Module is a 916.48 MHz Transceiver.
1.3 Label Information
The label is located on the top corner of the board opposite of the antenna and header.

US7,420,471; US8,169,335; US8,232,888; US5,939,986;
US6,810,353; AU2005289704; ZA2007/02919; ZA2008/02673;
ZA2010/06816, ZA2010/09068 Patent Pending
4
1.4 FCC/IC Information
The FCC ID for the RF Module is QUI-RF and complies with Part 15 of theFCC Rules. Operation
is subject to the following conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received including interference that may cause
undesired operation.
Any intentional or unintentional changes or modifications to the configuration of RF Module
not expressly approved by Frederick Energy Products LLC could void the user’s authority to
operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
not guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
--Reorient or relocate the receiving antenna.
--Increase the separation between the equipment and receiver.
--Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
--Consult the dealer or an experienced radio/technician for help.
Conformité aux normes FCC Cet équipement a été testé trouvé conforme aux limites pour un
dispositif numérique de classe B, conformément à la Partie 15 des règlements de la FCC. Ces
limites sont conçues pour fournir une protection raisonnable contre les interférences nuisibles
dans une installation résidentielle.
Cet équipement génère, utilise et peut émettre des fréquences radio et, s'il n'est pas installé et
utilisé conformément ment aux instructions du fabricant, peut causer des interférences nuisibles
aux communications radio.
Rien ne garantit cependant que l’interférences ne se produira pas dans une installation
particulière. Si cet équipement provoque des interférences nuisibles à la réception radio ou de
télévision, qui peut être déterminé en comparant et en l'éteignant, l'utilisateur est encouragé à
essayer de corriger les interférence par une ou plusieurs des mesures suivantes:
--Réorienter ou déplacer l'antenne de réception.
--Augmenter la distance entre l'équipement et le récepteur.

US7,420,471; US8,169,335; US8,232,888; US5,939,986;
US6,810,353; AU2005289704; ZA2007/02919; ZA2008/02673;
ZA2010/06816, ZA2010/09068 Patent Pending
5
--Branchez l'appareil dans une prise sur un circuit différent de celui auquel le récepteur est
connecté.
--Consulter le vendeur ou un technicien radio / expérimenté.
Les changements ou modififications à cet appareil sans expressément approuvée par la partie
responsable de conformité pourraient annuler l’autorité de l’utilisateur de faire fonctionner cet
équipement.
The required notices are specified in the RSS documents (including RSS-Gen) applicable to the
equipment model. These notices are required to be shown in a conspicuous location in the
user manual for the equipment, or to be displayed on the equipment model. If more than
one notice is required, the equipment model(s) to which each notice pertains should be
identified. Suppliers of radio apparatus shall provide notices and user information in both
English and French.
This device complies with Industry Canada license-exempt RSS-standards(s). Operation is
subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired
operation of the device.
Cet appareil est conforme avecx Industrie Canada exempt de licence Rss standard(s). Son
fonctionnement est soumis aux deux conditions suivantes:
(1) cet appareil ne peut causer d’interférence, et
(2) cet appareil doit accepter toute interférence, y compris des interférences qui peuvent
provoquer un fonctionnement indésirable du périphérique.
RSS-GEN 6.8 Statement.
This radio transmitter 11625A-RF has been approved by Innovation, Science and
Economic Development Canada to operate with the antenna types listed below, with
the maximum permissible gain indicated. Antenna types not included in this list that
have a gain greater than the maximum gain indicated for any type listed are strictly
prohibited for use with this device.
The antenna to be used with this device is a Linx ANT-916-WRT-UFL. Maximum power
transmitted with this antenna is -2.76 dBm with a required impedance of 50 ohms.
Déclaration RSS-GEN 6.8.
Cet émetteur radio 11625A-RF a été approuvé par Innovation, Sciences et
Développement économique Canada pour fonctionner avec les types d’antennes
énumérés ci-dessous, avec le gain maximal admissible indiqué. Les types d’antennes
non inclus dans cette liste qui ont un gain supérieur au gain maximal indiqué pour
n’importe quel type répertorié sont strictement interdits pour l’utilisation avec ce
périphérique.

US7,420,471; US8,169,335; US8,232,888; US5,939,986;
US6,810,353; AU2005289704; ZA2007/02919; ZA2008/02673;
ZA2010/06816, ZA2010/09068 Patent Pending
6
L’antenne à utiliser avec ce dispositif est un Linx ANT-916-WRT-UFL. La puissance
maximale transmise avec cette antenne est -2.76 dBm avec une impédance exigée de 50
ohms.

US7,420,471; US8,169,335; US8,232,888; US5,939,986;
US6,810,353; AU2005289704; ZA2007/02919; ZA2008/02673;
ZA2010/06816, ZA2010/09068 Patent Pending
7
2Operation
2.1 Installation Information
The RF Module comes pre-installed into all MFG units from the factory and do not require further
modification from the end user.
2.1.1 Inoperability Warning
There are no inoperability warnings.
2.2 Charging
The RF Module does not require charging. It gets power supplied directly from the MFG when powered on.
2.3 Alerts
The RF Module does not directly give any alerts.
2.4 Maintenance
No routine maintenance is required for the RF Module.
2.5 Adjustments
The RF module does not allow for tuning or adjustments to be made by the end user.
2.6 Interferences
The RF Module may receive false signals from some RF-based devices including high power
radios and cell phones. Such devices will need to be moved further away from the generator. If
the devices may not be moved, then the path may need to be marked to indicate areas of
interference of the system. If possible, the route may need to be changed.

US7,420,471; US8,169,335; US8,232,888; US5,939,986;
US6,810,353; AU2005289704; ZA2007/02919; ZA2008/02673;
ZA2010/06816, ZA2010/09068 Patent Pending
8
.
2.7 RF Module Specifications
Part Number: HN-RF
Size: 1.5” x 1.75” / 3.8cm x 4.4cm
Weight: 1oz / 28 g
Input Voltage: 5V
Operating Temperature Range: -30°C to + 70°C ; -22°F to 158°F
3Revision History
3.1 Version 1.0 –December 22, 2021
Original Release. No revision history.
Magnetic Field Frequency: none
Transceiver: Microchip Model MRF89XA
Transceiver: Transmit/Receive Frequency: 916.48 MHz
Transmitter Power: 0.001 W (typical)