Hitachi CP-S210W User manual

ENGLISH
FRANÇAIS
DEUTSCH
ESPAÑOL
ITALIANO
TECHNICAL
Projector
CPS210
CPS210W
User’s Manual – Operating Guide
Please read this user’s manual thoroughly to ensure correct usage understanding.
Manuel d’utilisation – Guide d'utilisation
N
ous vous recommandons de lire attentivement ce manuel pour bien assimiler le fonctionnement
de l’appareil.
Bedienungsanleitung – Benutzerhandbuch
Um zu gewährleisten, dass Sie die edienung des Geräts verstanden haben, lesen Sie dieses
Handbuch bitte sorgfältig.
Manual de usuario – Guía de funcionamiento
Lea atentamente el manual de usuario del proyector para garantizar un uso adecuado del mismo.
Manuale d'istruzioni – Guida operativa
Vi preghiamo di leggere attentamente il manuale d'istruzioni per garantire una corretta
comprensione delle istruzioni.
TEC NICAL
00CP-S210WBasic103.6.173:15PMページ2

Thank you for purchasing this projector.
• The information in this manual is subject to change without notice.
• The manufacturer assumes no responsibility for any errors that may appear in this manual.
• The reproduction, transmission or use of this document or contents is not permitted without
express written authority.
TRADEMARK ACKNOWLEDGMENT :
• VGA and XGA are registered trademar s of the International Business Machines Corporation.
• Apple and Mac are registered trademar s of Apple Computer, Inc.
• VESA and SVGA are trademar s of the Video Electronics Standard Association.
• Windows is a registered trademar of Microsoft Corporation.
All other trademar s are the property of their respective owners.
NOTE
WARNING Before using, read the "User's Manual - Safety Guide" and
these manuals to ensure correct usage through understanding. After reading,
store them in a safe place for future reference.
Projector
CPS210
CPS210W
User's Manual - Operating Guide
1
01CP-S210En03.6.199:27AMページ1

●
Ultra High Brightness
Crisp, ultra-bright presentations is achieved by using a UHB (ultra high brightness) lamp and a highly
efficient optical system.
●
Whisper Mode Equipped
Special mode is available for reducing projector noise to achieve quieter operation.
●
User Memory Function
This projector can memorize 4 settings by MY MEMORY function.
●
Partial Magnification Function
Interesting parts of images can be magnified for closer viewing.
●
Keystone Distortion Correction
Quick correction of distorted images electrically.
Preparation
Please see the “Contents Of Package” of the “User’s Manual – Quick Guide”.
Your projector should come with the items shown there. Contact your dealer
anything is missing.
Projector Features
This multimedia projector is used to project various computer signals as well as
NTSC / PAL / SECAM video signals onto a screen. Little space is required for
installation and large images can easily be realized.
• Keep the original packing material for future reshipment.
NOTE
2
01CP-S210En03.6.199:27AMページ2

3
Projector Features ……………………………………2
Preparation ……………………………………………………2
Part Names ……………………………………………………4
The Projector ………………………4
Fastening The Lens Cap …………4
The Remote Control ………………6
Setting Up …………………………………………………………7
Arrangement ………………………7
Adjusting The Projector’s
Elevator ……………………………8
Connecting Your Devices…………9
Connecting Power Supply ………11
Remote Control…………………………………………12
Putting Batteries …………………12
Operating The Remote Control…13
Power ON/OFF …………………………………………14
Turning On The Power …………14
Selecting An Input Signal ………15
Turning Off The Power …………16
Operating ……………………………………………………17
Adjusting The Volume …………17
Temporarily Muting The Sound…17
Adjusting The Position …………18
Using The Automatic
Adjustment Feature………………19
Correcting Keystone
Distortions…………………………19
Using The Magnify Feature ……20
Freezing The Screen ……………20
Signal Searching …………………21
Selecting The Aspect Ratio ……21
Temporarily Blanking
The Screen ………………………21
Multifunctional Settings ……………………22
Using The Menu Functions ……22
MAIN Menu ………………………23
PICTURE-1 Menu ………………24
PICTURE-2 Menu ………………26
INPUT Menu ……………………27
AUTO Menu ………………………29
SCREEN Menu …………………30
OPTION Menu ……………………31
Lamp ………………………………………………………………32
Replacing The Lamp ……………33
Air Filter …………………………………………………………34
Caring For The Air Filter…………34
Replacing The Air Filter …………35
Other Care ……………………………………………………36
Caring For The Inside
Of The Projector …………………36
Caring For The Lens ……………36
Caring For The Cabinet
And Remote Control ……………36
Troubleshooting ……………………………………37
Related Messages ………………37
Regarding
The Indicator Lamps ……………39
Phenomena That May Easily Be
Mistaken For Machine Defects …41
Warranty And After-Service ……42
Specifications …………………………………………43
TECHNICAL
Contents
01CP-S210En03.6.199:27AMページ3

4
Strap Rivet
Strap
hole
Part Names
The Projector
Zoom ring 15
Focus ring 15 Air filter cover
(An air filter is
inside.)
34
Elevator button
8
Elevator feet
8
Indicates the corresponding
reference page
Lens cap 14
Lens
(The picture is
projected from
here.)
Remote sensor
13
Projector (Front/Right)
Fastening The Lens Cap
To avoid losing, please fasten the lens cap to the projector using the strap.
1Fix the strap to the strap ring of lens
cap, as the right drawing.
2Put one piece of the strap into the
groove on rivet, as the right drawing.
3Push the rivet into the strap hole.
Lens cap Strap ring Strap
Pull
Rivet
Push in
(Bottom side)
01CP-S210En03.6.199:27AMページ4

5
AC inlet
11
VIDEO port 10
AUDIO port
(from a computer)
10
S-VIDEO port 10
COMPONENT VIDEO - Y 10
COMPONENT VIDEO - CB/PB10
COMPONENT VIDEO - CR/PR10
AUDIO R port
L port
(from a video equipment)
10
10
Power switch
14
RGB port
10
CONTROL
port
10
Projector (Rear/Left)
STANDBY/ON INPUT
POWER LAMP
TEMP
MENU
POWER indicator
tells the state of power
supply. Refer to the section
“Power ON/OFF”.
INPUT button
toggles between the signal
ports.
MENU buttons
operate the menu function.
STANDBY/ON
button
prepares for turning the
power on/off. Refer to the
section “Power ON/OFF”.
TEMP indicator
lights or blinks when any
problem about internal
temperature has happened.
LAMP indicator
lights or blinks when any
problem about the lamp has
happened.
RGB VIDEO
S-VIDEO
COMPONENT VIDEO
ACIN
Part Names (continued)
The Projector (continued)
15 14 39
39
22
14
01CP-S210En03.6.199:27AMページ5

6
The Remote Control
(STANDBY/ON)
button
prepares for turning the
power on/off.
VIDEO button
toggles between the signal
ports of VIDEO, S-VIDEO
and COMPONENT VIDEO.
MENU button
opens/closes the menu.
RGB button
selects the input signal of
RGB port.
BLANK button
blanks the screen
temporarily.
SEARCH button
searches for an input
signal between the
following signal ports of
RGB, VIDEO, S-VIDEO
and COMPONENT VIDEO.
VOLUME button
turns on/off the VOLUME
mode.
In the VOLUME mode,
To adjust the volume,
use the cursor /
buttons.
MUTE button
mutes/restores the sound.
KEYSTONE
button
turns on/off the KEYSTONE
mode.
In the KEYSTONE mode,
To adjust the
keystone,
use the cursor /
buttons.
ASPECT button
toggles between the
modes for aspect ratio.
AUTO button
executes automatic
temporarily.
MAGNIFY ON/OFF
buttons
turns on/off the MAGNIFY
mode.
In the MAGNIFY mode,
To move the
magnified area,
(1) Press the POSITION
button.
(2) Use the cursor buttons
to move the picture.
(3) Press the POSITION
button again to finish.
To shift the magnify
level,
use the cursor /
buttons.
FREEZE button
freezes/reactivates the
picture.
POSITION button
turns on/off the POSITION
mode. (for RGB input)
In the POSITION mode,
To move the picture,
use the cursor buttons.
ESC button
returns to the previous
display at the menu
functions.
,,,
(Cursor) buttons
works for adjusting or
menu controlling.
RESET button
cancels the adjustment in
progress.
* The adjustments of the
volume etc. are not reset.
ENTER button
proceeds to the next
operation at the menu
functions.
VIDEO
ASPECT
MUTE
KEYSTONEFREEZE
MENUPOSITION
ENTER
ESC RESET
VOLUME
MAGNIFY
AUTO BLANK
RGB SEARCH
OFF
ON
Part Names (continued)
15
15
21
20
20
18
22
22
22 22
22
19
17
17
21
19
14
21
01CP-S210En03.6.199:27AMページ6

7
Setting Up
Arrangement
WARNING •Install the projector in a suitable environment according to
instructions of the “User’s Manual –Safety Guide”and this manual.
•The power outlet should be close to the projector and easily accessible.
Refer to the illustrations and tables below to determine the screen size and projection
distance.
The values shown in the table are calculated for a full size screen:800×600
(a):Distance from the projector to the screen (±10%)
(b):Distance from the lens center to the bottom of the screen (±10%)
(c):Distance from the lens center to the top of the screen (±10%)
Screen Size [inch (m)] (a) [inch (m)] (b)
[inch (cm)]
(c)
[inch (cm)]
Min. Max.
30 (0.8) 35(0.9) 42(1.1) 2(5) 16(41)
40 (1.0) 47(1.2) 56(1.4) 2(6) 22(55)
50 (1.3) 59(1.5) 71(1.8) 3(8) 27(69)
60 (1.5) 71(1.8) 85(2.2) 4(9) 32(82)
70 (1.8) 83(2.1) 99(2.5) 4(11) 38(96)
80 (2.0) 95(2.4) 114(2.9) 5(12) 43(110)
90 (2.3) 107(2.7) 128(3.3) 5(14) 49(123)
100 (2.5) 119(3.0) 143(3.6) 6(15) 54(137)
120 (3.0) 143(3.6) 171(4.4) 7(18) 65(165)
150 (3.8) 179(4.6) 215(5.5) 9(23) 81(206)
200 (5.0) 239(6.1) 287(7.3) 12(30) 108(274)
250 (6.3) 300(7.6) 359(9.1) 15(38) 135(343)
300 (7.5) 360(9.1) 431(10.9) 18(46) 162(411)
(a)
(c)
(b)
Lens center
Screen
Reference for
the 4:3 aspect ratio
Screen Size [inch (m)] (a) [inch (m)] (b)
[inch (cm)]
(c)
[inch (cm)]
Min. Max.
30 (0.8) 38(1.0) 46(1.2) 0(1) 15(39)
40 (1.0) 51(1.3) 61(1.6) 1(2) 20(51)
50 (1.3) 64(1.6) 77(2.0) 1(2) 25(64)
60 (1.5) 77(2.0) 93(2.4) 1(2) 30(77)
70 (1.8) 90(2.3) 108(2.8) 1(3) 35(90)
80 (2.0) 104(2.6) 124(3.2) 1(3) 41(103)
90 (2.3) 117(3.0) 140(3.6) 1(4) 46(116)
100 (2.5) 130(3.3) 155(3.9) 2(4) 51(129)
120 (3.0) 156(4.0) 187(4.7) 2(5) 61(154)
150 (3.8) 196(5.0) 234(5.9) 2(6) 76(193)
200 (5.0) 216(6.6) 312(7.9) 3(8) 101(257)
250 (6.3) 327(8.3) 391(9.9) 4(10) 127(322)
300 (7.5) 393(10.0) 469(11.9) 5(12) 152(386)
(a)
(c)
(b)
Lens center
Screen
Reference for
the 16:9 aspect ratio
Side View
Side View
01CP-S210En03.6.199:27AMページ7

8
Adjusting The Projector's Elevator
CAUTION • If you press the elevator buttons without holding the projector, the
projector might crash down, overturn, smash your fingers and possibly result in
malfunction. To prevent damaging the projector and injuring yourself, ALWAYS HOLD
THE PROJECTOR whenever using the elevator buttons to adjust the elevator feet.
You can use the elevator feet to make adjustments if the surface on which you need to set
the projector is uneven or if you otherwise need to adjust the angle of projection. The
adjustment range of the elevator feet is 0 to 9 degrees.
1Press and hold in the elevator buttons.
2Raise or lower the projector to the
desired height and then release the
elevator buttons.
When you release the elevator buttons, the elevator
feet will lock into position.
3As necessary, you can also finely
adjust the height of the projector by
twisting the elevator feet by hand.
Elevator buttons
Elevator feet
Setting Up (continued)
01CP-S210En03.6.199:27AMページ8

9
Connecting Your Devices
WARNING •Incorrect connecting could result in fire or electrical shock.
Whenever attempting to connect other devices to the projector, please thoroughly
read the "User's Manual - Safety Guide", this manual and the manual of each device to
be connected.
CAUTION •TURN OFF ALL DEVICES prior to connecting them to the projector.
Attempting to connect a live device to the projector may generate extremely loud
noises or other abnormalities that may result in malfunction and/or damage to the
device and/or projector.
ATTENTION •Make sure that you connect devices to the correct port. Incorrect
connection may result in malfunction and/or damage to the device and/or projector.
Refer to the section “Technical”of this manual for the pin assignment of connectors and
RS-232C communication data.
•Some cables have to be used with core set. Use the accessory cable or a
designated-type cable for the connection. For cables that have a core only at one
end, connect the core to the projector.
•Secure the screws on the connectors and tighten.
•Whenever attempting to connect a laptop computer to the projector, be sure to
activate the laptop’s RGB external image output (set the laptop to CRT display or to
simultaneous LCD and CRT display). For details on how this is done, please refer to
the instruction manual of the corresponding laptop computer.
About Plug-and-Play Capability
•This projector is compatible with VESA DDC 1/2B. Plug-and-Play can be achieved by
connecting this projector to computers that are VESA DDC (display data channel)
compatible. Please take advantage of this function by connecting the accessory RGB
cable to the RGB port (DDC 1/2B compatible). Plug-and-Play may not work properly if
any other type of connection is attempted.
•Plug-and-Play is a system composed of the computer, its operating system and
peripheral equipment (i.e. display devices).
•Please use the standard drivers in your computer as this projector is a Plug-and-Play
monitor.
NOTE
•Some computers may have multiple display screen modes. Use of some of
these modes will not be possible with this projector.
•For some RGB input modes, the optional Mac adapter is necessary.
NOTE
Setting Up (continued)
01CP-S210En03.6.199:27AMページ9