Hitachi ic35l060avv207-0 - Deskstar 60 GB Hard Drive User manual

Hard disk drive specifications
Deskstar 180 GXP
3.5 inch Ultra ATA/100 hard disk drive
IC35L030AVV207
IC35L060AVV207
IC35L090AVV207
IC35L120AVV207
IC35L180AVV207
Models:
Revision 4.2 30 April 2003
S08-K0000-06 Publication #2840

Hard disk drive specifications
Deskstar 180 GXP
3.5 inch Ultra ATA/100 hard disk drive
IC35L030AVV207
IC35L060AVV207
IC35L090AVV207
IC35L120AVV207
IC35L180AVV207
Models:
Revision 4.2 30 April 2003
S08-K0000-06 Publication #2840

1st Edition (Revision 1.0) S-08K-0000-00 (18 December 2001) Preliminary
2nd Edition (Revision 2.0) S-08K-0000-00 (18 April 2002) Preliminary
3rd Edition (Revision 2.1) S-08K-0000-00 (21 June 2002) Preliminary
4rd Edition (Revision 2.2) S-08K-0000-00 (25 July 2002) Preliminary
5th Edition (Revision 2.3) S-08K-0000-01 (01 August 2002) Preliminary
6th Edition (Revision 2.5) S-08K-0000-02 (06 August 2002) Preliminary
7th Edition (Revision 3.0) S-08K-0000-03 (16 August 2002) Preliminary
8th Edition (Revision 4.0) S-08K-0000-04 (30 September 2002) Release
9th Edition (Revision 4.1) S-08K-0000-05 (08 January 2003) Revision
10th Edition (Revision 4.2) S-08K-0000-06 (30 April 2003) Revision
The following paragraph does not apply to the United Kingdom or any country where such provisions are
inconsistent with local law: HITACHI GLOBAL STORAGE TECHNOLOGIES PROVIDES THIS PUB-
LICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, IN-
CLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer or express or implied warranties in certain
transactions, therefore, this statement may not apply to you.
This publication could include technical inaccuracies or typographical errors. Changes are periodically made to the
information herein; these changes will be incorporated in new editions of the publication. Hitachi may make
improvements or changes in any products or programs described in this publication at any time.
It is possible that this publication may contain reference to, or information about, Hitachi products (machines and
programs), programming, or services that are not announced in your country. Such references or information must
not be construed to mean that Hitachi intends to announce such Hitachi products, programming, or services in your
country.
Technical information about this product is available by contacting your local Hitachi Global Storage Technologies
representative or on the Internet at http://www.hgst.com
Hitachi Global Storage Technologies may have patents or pending patent applications covering subject matter in
this document. The furnishing of this document does not give you any license to these patents.
©Copyright Hitachi Globlal Storage Technologies
Note to U.S. Government Users —Documentation related to restricted rights —Use, duplication or disclosure is
subject to restrictions set forth in GSA ADP Schedule Contract with Hitachi Global Storage Technologies.

Table of contents
476.5 DC power requirements .......................................................
466.4.2 Corrosion test ..........................................................
456.4.1 Temperature and humidity ...............................................
456.4 Environment ................................................................
416.3.4 Jumper positions .......................................................
406.3.3 Jumper pin assignment ..................................................
396.3.2 Jumper pin identification .................................................
396.3.1 Jumper pin location .....................................................
396.3 Jumper settings ..............................................................
386.2.6 Cabling ................................................................
386.2.5 Addressing of registers ..................................................
306.2.4 Ultra DMA timings ......................................................
296.2.3 Multiword DMA timings ..................................................
276.2.2 PIO timings ............................................................
266.2.1 Reset timings ..........................................................
266.2 Signal timings ...............................................................
256.1.3 Interface logic signal levels ...............................................
226.1.2 Signal definition ........................................................
216.1.1 Connector location ......................................................
216.1 Electrical interface ...........................................................
21
6.0 Specification ...............................................................
19
5.0 Defect flagging strategy ....................................................
174.4.6 Operating modes .......................................................
164.4.5 Throughput ............................................................
154.4.4 Data transfer speed .....................................................
144.4.3 Drive ready time ........................................................
124.4.2 Mechanical positioning ..................................................
124.4.1 Command overhead ....................................................
124.4 Performance characteristics ...................................................
114.3.2 Cylinder allocation ......................................................
114.3.1 Drive format ............................................................
114.3 Drive organization ............................................................
104.2 Data sheet ..................................................................
94.1 Default logical drive parameters ..................................................
9
4.0 Drive characteristics ..........................................................
73.3 Actuator ......................................................................
73.2 Head disk assembly ............................................................
73.1 Control Electronics .............................................................
7
3.0 Fixed disk subsystem description .............................................
5
Part 1. Functional specification ..............................................
3
2.0 General features .............................................................
11.3 References ...................................................................
11.2 General caution ................................................................
11.1 Glossary ......................................................................
1
1.0 General ......................................................................
xi
List of figures ...................................................................
Deskstar 180GXP hard disk drive specifications
v

708.13 Status Register .............................................................
698.12 Sector Number Register .....................................................
698.11 Sector Count Register .......................................................
698.10 Features Register ...........................................................
688.9 Error Register ...............................................................
688.8 Device/Head Register ........................................................
678.7 Drive Address Register .......................................................
678.6 Device Control Register ......................................................
678.5 Data Register ...............................................................
668.4 Cylinder Low Register ........................................................
668.3 Cylinder High Register .......................................................
668.2 Command Register ..........................................................
668.1 Alternate Status Register .....................................................
65
8.0 Registers ..................................................................
637.2 Deviations from standard .....................................................
637.1 Terminology .................................................................
63
7.0 General ....................................................................
61
Part 2. Interface specification ..............................................
606.12.2 C-Tick Mark ...........................................................
606.12.1 CE Mark ..............................................................
606.12 Electromagnetic compatibility .................................................
596.11.6 Secondary circuit protection .............................................
596.11.5 Environment ..........................................................
596.11.4 Safe handling .........................................................
596.11.3 Flammability ..........................................................
596.11.2 German Safety Mark ...................................................
596.11.1 UL and CSA standard conformity ........................................
596.11 Safety .....................................................................
586.10 Identification labels ..........................................................
576.9 Acoustics ...................................................................
566.8.5 Nonoperating Rotational shock ...........................................
566.8.4 Nonoperating shock .....................................................
566.8.3 Operating shock ........................................................
556.8.2 Nonoperating vibration ..................................................
556.8.1 Operating vibration ......................................................
556.8 Vibration and shock ..........................................................
546.7.5 Heads unload and actuator lock ..........................................
546.7.4 Drive mounting .........................................................
546.7.3 Connector locations .....................................................
536.7.2 Hole locations ..........................................................
516.7.1 Physical dimensions ....................................................
516.7 Mechanical specifications .....................................................
506.6.6 Required Power-Off Sequence ...........................................
506.6.5 Data reliability ..........................................................
506.6.4 Preventive maintenance .................................................
506.6.3 Start/stop cycles ........................................................
506.6.2 Cable noise interference .................................................
506.6.1 Data integrity ...........................................................
506.6 Reliability ...................................................................
496.5.3 Power supply generated ripple at drive power connector .....................
476.5.2 Power supply current (typical) ............................................
476.5.1 Input voltage ...........................................................
Deskstar 180GXP hard disk drive specifications
vi

11111.2.4 DEVICE CONFIGURATION SET (subcommand C3h) .....................
11111.2.3 DEVICE CONFIGURATION IDENTIFY (subcommand C2h) ................
11111.2.2 DEVICE CONFIGURATION FREEZE LOCK (subcommand C1h) ...........
11011.2.1 DEVICE CONFIGURATION RESTORE (subcommand C0h) ...............
11011.2 Device Configuration Overlay (B1h) ..........................................
10911.1 Check Power Mode (E5h/98h) ...............................................
105
11.0 Command descriptions ...................................................
10310.5 DMA queued commands ....................................................
10210.4 DMA commands ...........................................................
10010.3 Non-data commands .......................................................
9810.2 PIO Data Out commands ....................................................
9610.1 PIO Data In commands ......................................................
95
10.0 Command Protocol ........................................................
939.16 48-bit Address Feature Set ..................................................
929.15.3 Exceptions in Address Offset Mode ......................................
929.15.2 Identify Device Data ....................................................
919.15.1 Enable/Disable Address Offset Mode .....................................
919.15 Address Offset Feature ......................................................
919.14 Automatic Acoustic Management feature set (AAM) .............................
909.13 Advanced Power Management feature set (APM) ...............................
909.12 Power-Up In Standby feature set ..............................................
899.11.1 Auto Reassign function .................................................
899.11 Reassign function ...........................................................
899.10 Write cache function .........................................................
889.9 Seek Overlap ................................................................
879.8.2 Security extensions .....................................................
869.8.1 Example for operation (in LBA mode) ......................................
869.8 Host Protected Area Function ..................................................
849.7.5 Command table ........................................................
819.7.4 Operation example ......................................................
809.7.3 Passwords .............................................................
809.7.2 Security level ...........................................................
809.7.1 Security mode ..........................................................
809.7 Security Mode Feature Set ....................................................
799.6.8 Self-test ...............................................................
789.6.7 Error log ...............................................................
789.6.6 Off-line read scanning ...................................................
789.6.5 S.M.A.R.T. commands ..................................................
789.6.4 Threshold Exceeded Condition ...........................................
789.6.3 Attribute thresholds .....................................................
789.6.2 Attribute values .........................................................
789.6.1 Attributes ..............................................................
789.6 S.M.A.R.T. function ..........................................................
779.5.4 Interface capability for power modes ......................................
769.5.3 Standby timer ..........................................................
769.5.2 Power management commands ..........................................
769.5.1 Power modes ..........................................................
769.5 Power management feature ...................................................
759.4 Overlapped and queued feature ................................................
749.3.2 LBA Addressing Mode ...................................................
749.3.1 Logical CHS Addressing Mode ...........................................
749.3 Sector Addressing Mode ......................................................
739.2 Diagnostic and reset considerations ............................................
729.1.1 Register initialization ....................................................
719.1 Reset response .............................................................
719.0 General operation ..........................................................
Deskstar 180GXP hard disk drive specifications
vii

20011.42.5 SMART summary error log sector ......................................
19911.42.4 SMART Log Directory ................................................
19811.42.3 Device Attribute Thresholds Data Structure .............................
19411.42.2 Device Attributes Data Structure .......................................
19011.42.1 S.M.A.R.T. Subcommand .............................................
18911.42 S.M.A.R.T. Function Set (B0h) ..............................................
18811.41 Sleep (E6h/99h) ..........................................................
18711.40 Set Multiple (C6h) .........................................................
18511.39 Set Max Address Ext (37h) .................................................
18411.38.4 Set Max Freeze Lock (Feature = 04h) ..................................
18311.38.3 Set Max Unlock (Feature = 03h) .......................................
18211.38.2 Set Max Lock (Feature = 02h) .........................................
18111.38.1 Set Max Set Password (Feature = 01h) .................................
17911.38 Set Max Address (F9h) ....................................................
17711.37.4 Automatic Acoustic Management ......................................
17611.37.3 Advanced Power Management ........................................
17611.37.2 Write Cache ........................................................
17611.37.1 Set Transfer mode ...................................................
17511.37 Set Features (EFh) ........................................................
17411.36 Service (A2h) ............................................................
17311.35 Seek (7xh) ...............................................................
17111.34 Security Unlock (F2h) .....................................................
16911.33 Security Set Password (F1h) ...............................................
16811.32 Security Freeze Lock (F5h) ................................................
16611.31 Security Erase Unit (F4h) ..................................................
16511.30 Security Erase Prepare (F3h) ...............................................
16411.29 Security Disable Password (F6h) ...........................................
16311.28 Recalibrate (1xh) .........................................................
16111.27 Read Verify Sector(s) Ext (42h) .............................................
15911.26 Read Verify Sector(s) (40h/41h) ............................................
15711.25 Read Sector(s) Ext (24h) ..................................................
15511.24 Read Sector(s) (20h/21h) ..................................................
15411.23 Read Native Max Address Ext (27h) ........................................
15311.22 Read Native Max Address (F8h) ............................................
15111.21 Read Multiple Ext (29h) ....................................................
14911.20 Read Multiple (C4h) .......................................................
14711.19 Read Long (22h/23h) ......................................................
14511.18.3 Extended Self-test log sector ..........................................
14211.18.2 Extended Comprehensive SMART Error log .............................
14111.18.1 General Purpose Log Directory ........................................
14011.18 Read Log Ext (2Fh) .......................................................
13811.17 Read DMA Queued Ext (26h) ..............................................
13611.16 Read DMA Queued (C7h) ..................................................
13411.15 Read DMA Ext (25h) ......................................................
13211.14 Read DMA (C8h/C9h) .....................................................
13111.13 Read Buffer (E4h) ........................................................
13011.12 NOP (00h) ...............................................................
12911.11 Initialize Device Parameters (91h) ...........................................
12811.10 Idle Immediate (E1h/95h) ..................................................
12711.9 Idle (E3h/97h) .............................................................
12011.8 Identify Device (ECh) .......................................................
11911.7 Format Unit (F7h) ..........................................................
11711.6 Format Track (50h) ........................................................
11611.5 Flush Cache Ext (EAh) .....................................................
11511.4 Flush Cache (E7h) .........................................................
11411.3 Execute Device Diagnostic (90h) .............................................
Deskstar 180GXP hard disk drive specifications
viii

231
Index .........................................................................
229
12.0 Timings .................................................................
22711.55 Write Sector(s) Ext (34h) ...................................................
22511.54 Write Sector(s) (30h/31h) ..................................................
22311.53 Write Multiple Ext (39h) ....................................................
22111.52 Write Multiple (C5h) .......................................................
21911.51 Write Long (32h/33h) ......................................................
21711.50 Write Log Ext (3Fh) .......................................................
21511.49 Write DMA Queued Ext (36h) ...............................................
21311.48 Write DMA Queued (CAh/CBh) .............................................
21111.47 Write DMA Ext (35h) ......................................................
20911.46 Write DMA (CAh/CBh) .....................................................
20811.45 Write Buffer (E8h) .........................................................
20711.44 Standby Immediate (E0h/94h) ..............................................
20511.43 Standby (E2h/96h) ........................................................
20411.42.7 Error reporting ......................................................
20311.42.6 Self-test log data structure ............................................
Deskstar 180GXP hard disk drive specifications
ix

This page intentionally left blank.