Symbols used throughout this instruction manual, comprise:
3.
Pay close attention here
Apply P.A Glue
Apply C.A Glue
Assemble left andright
sides the sameway
Drill holes with the specified
diameter (here: 2mm)
Ensure smooth non-binding
movement while assembling
Cut off shadedportion
Apply A.B Glue Purchase separately
2mm
A
B
P. A
C.A
Parts List
1.Read through the manual before you begin,so you will have an overall idea of what to do.
2.Check all parts.If you find any defective or missing parts contact your local dealer.Please DRY
FIT and check for defective for all parts that will require CA or Epoxy for final assembly.Any
parts you find to be defective after the gluing process may be difficult to remove for warranty
replacement.The manufacturer will replace any defective parts,but will be difficult to extend to
the good parte that are good before gluing to defective parts during assembly.
BEFORE YOU BEGIN
2
