Holland Green Science 10303001 User manual

User Manual
Version 1.0 1
10303001/10303002/10303003
Aquilon
Chiller
User Manual

User Manual
Version 1.0 2
Contents
I. Disclaimer...................................................................................................................... 3
LIMITED WARRANTY & DISCLAIMER .................................................................................... 3
LIMITATION OF LIABILITY....................................................................................................... 5
II. Safety ............................................................................................................................. 6
2.1 After Sales Support ......................................................................................................... 7
III. Aquilon Introduction..................................................................................................... 8
Overview................................................................................................................................ 8
IV. Technical Specifications............................................................................................... 9
V. Proper Use....................................................................................................................10
VI. Inspection.....................................................................................................................10
VII. Operating Instructions.................................................................................................11
Preparation and Precautions Prior to Use..............................................................................11
7.1 User Interface ..............................................................................................................12
7.2 Startup.........................................................................................................................13
7.3 Setting of parameters...................................................................................................13
7.4 Start / Stop Cooling Operation .....................................................................................14
VIII. Troubleshooting...........................................................................................................15
IX. Maintenance and Cleaning ..........................................................................................15

User Manual
Version 1.0 3
I. Disclaimer
•The intellectual property rights for this manual belongs to Holland Green Science
Corporation (hereinafter referred to as “the Company”).
•Products of the company are under the patent protection of China and other countries
and regions (inclusive of obtained patents and patents currently under application).
•The company reserves the right to change product specifications without notice.
•The contents of the manual are subject to change without notice.
•The manual’s content must not be copied, extracted, or modified in any form without the
Company’s permission.
LIMITED WARRANTY & DISCLAIMER
Products sold by the Company are intended solely for the use(s) specified by the manufacturer
and are not to be used for any other purposes including, but not limited to, unauthorized
commercial purposes. Buyer warrants and represents that Buyer will properly test, use, qualify,
and/or validate each Product for intended use, and, to the extent authorized, manufacture and
market any final articles made from the Company’s Products in accordance with the practices of
a reasonable person who is an expert in the field, and in strict compliance with all applicable
national, state and local laws and regulations. Buyer acknowledges and understands that the
purchase of Products only conveys to Buyer the non-transferable right for only the Buyer to use
the Products purchased in compliance with the applicable manufacturer's Published User
Statement, Limited User Statement, or Limited License, if any. While this manual contains
certain representations of the potential dangers from the instrument or equipment, Buyer is
solely responsible for conducting any research necessary to learn the hazards involved for any
of its intended uses of the instrument or equipment purchased from the Company and to
properly warn its customers, employees and other personnel who may be exposed to such
instrument or equipment of any risks involved in using or handling the instrument or equipment.
The Company warrants that this product will operate or perform substantially in conformance
with the Company’s published specifications and be free from defects in material and
workmanship, when subjected to normal, proper and intended storage and usage by properly
trained personnel, for the duration of the manufacturer’s warranty period set forth in this product
documentation, published specifications or package inserts. If a manufacturer’s warranty period
is not specified in the product documentation, published specifications or package inserts, the
warranty period shall be one (1) year from the date of Bill of Sale to Buyer for equipment, and
the earlier of any stated expiration dates or ninety (90) days for all other products (the "Warranty
Period"). The Company agrees during the Warranty Period, to repair or replace, at the
Company’s option, defective Products so as to cause the same to operate in substantial
conformance with said published specifications; provided that Buyer shall (a) promptly notify the
Company in writing upon the discovery of any defect, which notice shall include the product
model and serial number (if applicable) and details of the warranty claim; and (b) after the
Company's review, the Company will provide Buyer with service data and/or a Return Material

User Manual
Version 1.0 4
Authorization ("RMA"), which may include biohazard decontamination procedures and other
product-specific handling instructions, then, if applicable, Buyer may return the defective
Products to the Company with all costs prepaid by Buyer. Replacement parts may be new or
refurbished, at the election of the Company. All replaced parts shall become the property of the
Company. Shipment to Buyer of repaired or replacement Products shall be made in accordance
with the Delivery provisions of the Terms & Conditions agreed to by the purchase of this
product. Consumables are expressly excluded from this warranty.
Notwithstanding the foregoing, Products supplied by the Company but not manufactured by the
Company are not warranted by the Company, and the Company disclaims all warranties
associated with the accuracy of any original manufacturer or third-party supplier Product
information, but the Company agrees to assign to Buyer any warranty rights in such Product
that the Company may have from the original manufacturer or third-party supplier, to the extent
such assignment is allowed by such original manufacturer or third-party supplier.
In no event shall the Company have any obligation to make repairs, replacements or corrections
required, in whole or in part, as the result of (i) normal wear and tear, (ii) accident, disaster or
event of force majeure, (iii) misuse, fault or negligence of or by Buyer, (iv) use of the Product in
a manner for which they were not designed, (v) causes external to the Product such as, but not
limited to, power failure or electrical power surges, (vi) improper storage and handling of the
Product or (vii) use of the Product in combination with equipment or software not supplied by the
Company. If the Company determines that Product for which Buyer has requested warranty
services are not covered by the warranty hereunder, Buyer shall pay or reimburse the Company
for all costs of investigating and responding to such request at the Company's then prevailing
time and materials rates. If the Company provides repair services or replacement parts that are
not covered by this warranty, Buyer shall pay the Company therefor at the Company's then
prevailing time and materials rates.
ANY INSTALLATION, MAINTENANCE, REPAIR, SERVICE, RELOCATION OR ALTERATION
TO OR OF, OR OTHER TAMPERING WITH, THE PRODUCT PERFORMED BY ANY
PERSON OR ENTITY OTHER THAN THE COMPANY WITHOUT THE COMPANY'S PRIOR
WRITTEN APPROVAL, OR ANY USE OF REPLACEMENT PARTS NOT SUPPLIED BY THE
COMPANY, SHALL IMMEDIATELY VOID AND CANCEL ALL WARRANTIES WITH RESPECT
TO THE PRODUCT.
THE OBLIGATIONS CREATED BY THIS WARRANTY STATEMENT TO REPAIR OR
REPLACE A DEFECTIVE PRODUCT SHALL BE THE SOLE REMEDY OF BUYER IN THE
EVENT OF A DEFECTIVE PRODUCT. EXCEPT AS EXPRESSLY PROVIDED IN THIS
WARRANTY STATEMENT, THE COMPANY DISCLAIMS ALL OTHER WARRANTIES,
WHETHER EXPRESS OR IMPLIED, ORAL OR WRITTEN, WITH RESPECT TO THE
PRODUCTS, INCLUDING WITHOUT LIMITATION ALL IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE OR USE. THE
COMPANY DOES NOT WARRANT THAT THE PRODUCTS ARE ERROR-FREE OR WILL
ACCOMPLISH ANY PARTICULAR RESULT.
NOTHING IN THIS MANUAL OR IN THE TERMS AND AGREEMENT AGREED TO AT THE
TIME OF PURCHASE SHALL BE CONSTRUED TO PROVIDE FOR THE TRANSFER,
ASSIGNMENT OR ALIENATION OF THE LIMITED WARRANTIES PROVIDED BY THE

User Manual
Version 1.0 5
COMPANY HEREIN TO ANY OTHER PARTY OTHER THAN BUYER, INCLUDING BUT NOT
LIMITED TO, SUCCESSORS, HEIRS, SUBSIDIARIES OR ANY OTHER THIRD PERSON.
THE WARRANTIES IDENTIFIED ABOVE ARE THE SOLE AND EXCLUSIVE WARRANTIES
WITH RESPECT TO THIS PRODUCT AND ARE IN LIEU OF ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED. ALL OTHER WARRANTIES ARE EXPRESSLY DISCLAIMED,
INCLUDING, WITHOUT LIMITATION, THOSE OF NON-INFRINGEMENT,
MERCHANTABILITY, OR FITNESS FOR A SPECIFIC PURPOSE OR USE (WHETHER
ARISING FROM STATUTE, OR OTHERWISE IN LAW, OR FROM A COURSE OF DEALING,
OR USAGE OF TRADE). THIS WARRANTY IS NOT TRANSFERABLE FROM THE ORIGINAL
PURCHASER TO A SUBSEQUENT OWNER. FURTHER, THE COMPANY IS NOT LIABLE IN
CASES OF DELIBERATE, NEGLIGENT OR ACCIDENTAL MISUSE OF THE PRODUCTS,
USE WITH INAPPROPRIATE REAGENTS OR CONSUMABLES, DAMAGE CAUSED BY
DISASTER, REPAIR OR MODIFICATIONS DONE BY ANYONE OTHER THAN THE
COMPANY. THE COMPANY DOES NOT WARRANT THAT THE PRODUCT WILL NOT
INFRINGE THE INTELLECTUAL PROPERTY RIGHTS OF A THIRD PARTY EITHER ALONE
OR IN COMBINATION WITH OTHER PRODUCTS OR IN THE OPERATION OF ANY
PROCESS. THE COMPANY’S TOTAL LIABILITY FOR BREACH OF THESE WARRANTIES
SHALL BE LIMITED TO THE GROSS PURCHASE PRICE FOR THE PRODUCT AS STATED
IN THE RELEVANT INVOICE OR ORDER UNDER WHICH THE ACTIVITY GIVING RISE TO
LIABILITY ARISES. UNDER NO CIRCUMSTANCES SHALL THE COMPANY BE LIABLE FOR
INDIRECT, INCIDENTAL, CONSEQUENTIAL, SPECIAL OR PUNITIVE DAMAGES
(INCLUDING LOSS OF BUSINESS OR PROFITS) UNDER ANY THEORY OF LIABILITY
HEREUNDER.
For claims under the warranty please contact your local supplier. You may also send the
instrument directly to manufacturer, enclosing the invoice copy and by giving reasons for the
claim.
LIMITATION OF LIABILITY
NOTWITHSTANDING ANYTHING TO THE CONTRARY CONTAINED HEREIN, THE
LIABILITY OF THE COMPANY UNDER THESE TERMS AND CONDITIONS (WHETHER BY
REASON OF BREACH OF CONTRACT, TORT, INDEMNIFICATION, OR OTHERWISE, BUT
EXCLUDING LIABILITY OF THE COMPANY FOR BREACH OF WARRANTY (THE SOLE
REMEDY FOR WHICH SHALL BE AS PROVIDED UNDER THIS SECTION) SHALL NOT
EXCEED AN AMOUNT EQUAL TO THE LESSER OF (A) THE TOTAL PURCHASE PRICE
THERETOFORE PAID BY BUYER TO THE COMPANY WITH RESPECT TO THE
PRODUCT(S) GIVING RISE TO SUCH LIABILITY OR (B) ONE HUNDRED THOUSAND
DOLLARS ($100,000), WHICHEVER IS LESS.
With respect to any software products incorporated in or forming a part of the Product
hereunder Buyer intends and agrees that such software products are being licensed and not
sold, and that the words "purchase", "sell" or similar or derivative words are understood and
agreed to mean "license", and that the word "Buyer" or similar or derivative words are
understood and agreed to mean "licensee". Notwithstanding anything to the contrary contained
herein, The COMPANY or its licensor, as the case may be, retains all rights and interest in
software products provided hereunder. See the Terms & Conditions of purchase for details
regarding such license.

User Manual
Version 1.0 6
II. Safety
IMPORTANT Safety Items to be Observed.
Safety Warnings
! DANGER (may cause serious damage to property and or casualties)
1. Please carefully read this User Manual prior to operating the instrument and observe the
instructions on safe operation.
2. Ensure that only trained staff operate this instrument
3. The power source must be grounded reliably and away from any sources of
electromagnetic interference.
4. Ensure that the instrument and its accessories are free of any potential defects.
5. Confirm that the voltage and frequency of the power supply matches the specified voltage
and frequency specified prior to use.
6. Ensure the cover of the junction box is properly installed prior to operation.
7. Always wear applicable PPE whilst operating the instrument.
8. Place the instrument on a stable, dry, clean, antiskid, and fireproof surface.
9. Ensure there is sufficient ventilation gaps and spacing above and around the instrument
10. Ensure the instrument is stable and level and will not move due to vibration upon start-up.
11. Liquid must not enter the casing
! WARNING (may cause property damage or personal injury)
12. The working environment must be free of any flammable, explosive, volatile or corrosive
substances.
13. Only accessories listed as ‘optional accessories’ for use, can guarantee operational safety.
14. Ensure handling and disposal of packaging is compliant to local environmental laws and
regulations.
! ATTENTION (may affect operational performance or service life)
15. The instrument is deenergised only when the power cable is disconnected from the power
source.
16. Ensure the instrument and its accessories are protected external vibration.
17. The Company reserves the right to modify the design and technical data of the pump
without notice.
18. Only accredited and qualified professional repair technicians can open the instrument or
conduct required repairs. Persons performing repairs on the instrument other than those
selected or approved by the Company shall operate to void any warranty contained
hereinabove for the product
19. Do NOT operate this instrument immediately after transport, wait 1-2 days before
operating. The instrument must be used in accordance with this User Manual.

User Manual
Version 1.0 7
2.1 After Sales Support
If problems are encountered or technical support is required when installing or using the
instrument, please contact [e-mail]
The Company may provide technical assistance and information regarding the
instrument or equipment or Service without charge at its sole discretion. Buyer
assumes sole responsibility for any reliance on or use of such assistance and
information, and the Company makes no warranty thereon.
Upon contact the following information is required:
•Product serial number (located on the instrument nameplate)
•Description of issue or problem
•Method and or operating steps you have undertaken towards resolution.
•Your contact details inclusive of telephone number and email address.

User Manual
Version 1.0 8
III. Aquilon Introduction
The Aquilon recirculating chillers feature PID temperature controllers to provide accurate and
reliable temperature control and cooling. They are designed for continuous, reliable operation
When the liquid is not in use, the liquid should be discharged.
Included are alarm functions such as, timing and over-temperature protection.
A Pt100 platinum resistance sensor is used as the temperature sensing element.
Overview
1
2
3
4
5
1) User Interface
2) Bath(cover)
3) Inlet / Outlet
4) Main Power Switch (right hand side)
5) Power cord (rear)

User Manual
Version 1.0 9
IV. Technical Specifications
Model
10303001
10303002
10303003
Product Name
Aquilon Min
Aquilon
Aquilon Max
Reservoir volume(L)
10.5
13
25
Process temperature (℃)
﹣20℃～20℃
Ambient Temperature (℃)
≤30
Refrigeration
Performance
Ambient relative humidity
(%RH)
≤65
Temperature stability (℃)
±0.5℃
Cooling capacity
at 10℃(W)
1200
1500
2500
Refrigerant
R404A
R410A
Electrical
performance
Power Consumption (W)
800
1300
1600
Sensor
PT100
Controller Display Type
Liquid Crystal
Safety protection
Compressor delay protection, machine leakage, over-
current, over-voltage protection
Power
AC120V/60HZ
AC220V±10%/60HZ
Power Consumption (W)
60
Maximum flow (L/min)
17
Pump
Maximum lift (m)
15
Liquid inlet and outlet pipe
diameter (mm)
φ10
φ12
Dimensions (mm)
335*455*671
400*500*739
450*600*821
Altitude (m)
<2000
<2000
<2000

User Manual
Version 1.0 10
V. Proper Use
The instrument is designed for non-residential use and to be used in conjunction only
with accessories recommended within this manual and by the manufacturer.
VI. Inspection
Unpack the equipment carefully and check for any damage which may have arisen during
transport. In the event of identified damage, please contact
[e-mail]
The package includes the following items
Item Description
Quantity
Main Unit
1
Hose
1
CAUTION:
If there is any visible damage to the
instrument, please do not connect the
instrument to a power supply.

User Manual
Version 1.0 11
VII. Operating Instructions
Preparation and Precautions Prior to Use
a. The instrument must be placed on a flat and level surface composed of non-combustible
materials.
b. 300mm (minimum) of clearance is required around the instrument to ensure the front
and back ventilation grilles are well ventilated.
c. This instrument is equipped with a compressor. If the instrument is transported, do NOT
operate immediately. Stand in the correct position or location and wait 1 to 2 days prior
to operating.
d. When filling the liquid tank, ensure liquid does not enter the instrument casing.
e. The liquid must cover the evaporator.
f. Use an appropriate liquid for desired temperature range
g. When the liquid is water, pay close attention to the temperature set point to prevent Icing
h. Do not mix liquids
i. DANGER! Do NOT use flammable liquids. Use of such is classified as ‘improper use’ of
the instrument.
j. Tighten hose connections securely.
k. During continuous operation, the connection between the bath cover and the circulation
pump may become very cold. When touching these areas ensure suitable PPE is being
worn.
l. Do not transport the instrument with liquid inside the tank due to the potential of liquid
ingress into the instrument.
m. Use only clean liquids to prevent sediment or solids entering the cooling system and
damaging the instrument.

User Manual
Version 1.0 12
7.1 User Interface
•TEMP: Displays the measured temperature value. To set the desired
temperature, press the SETTINGS key until the TEMP SET value flashes. Press
the setting key again to confirm the parameter.
•SET: Displays the desired temperature value set manually.
•RUN: Indicates that the chiller is operating.
•Cooling Indicator: Indicates chiller is cooling.
•Circulation Indicator: Indicates pump is operating.
•TIME: Displays the set running time; this value counts down to zero and
operation stops. To set a timer, press the SETTINGS key. When the TIME value
flashes, enter the desired time using they arrow keys. Leave at zero if a timer is
not needed.
•Silence Indicator: Indicates a silenced alarm.
•Alarm Indicator: Indicates an alarm.
Settings: Used for manually setting values and parameters.
Left Arrow: Shifts to the numbers on the left to set desired value.
Down Arrow: One push will decrease 1 digit; A long press willdecrease digits faster.
Up Arrow: One push will increase 1 digit; A long press will increase digits faster.
Cooling Key: Press and hold key for more than 4 seconds to control start/stop the
cooling function.
Circulation Key: Press to start/stop the circulation function.

User Manual
Version 1.0 13
7.2 Startup
Connect the power according to the power outlet.
Turn on the instrument at the main switch. The display shows the initialization sequence before
the instrument is ready to use.
NOTE: Every time you turn on the instrument it will beep intermittently, the icon of visual alarm
and the word “end” will appear on the display.
7.3 Setting of parameters
Temperature Setting
When the instrument is switched on, press the button one time, and the set temperature
value will start to flash. Set the desired temperature value with or keys
The button allows for movement between the digits.
Confirm the set value with another press of button.
Time Settings
Press the button.
The last value of the set time (timer) will start to flash. Set the desired value (hh:mm) by pressing
or keys. The button allows for movement between the digits.
Confirm the set value with another press of button.
NOTE: the value “00:00” indicates the operating mode is continuous, once you start with the
START / STOP button, the system will continue maintaining the set temperature until it is stopped
manually.
If you set the timer, such as one hour, the instrument will reach the set temperature and maintain
it for one hour.

User Manual
Version 1.0 14
7.4 Start / Stop Cooling Operation
Before the refrigeration is turned on, please press key to let the liquid circulate in the
pipeline in advance.
After setting the operating parameters, press button for 4 to 5 seconds to start the cooling
process.

User Manual
Version 1.0 15
VIII. Troubleshooting
IX. Maintenance and Cleaning
Keep the instrument dry and clean in routine operations.
Clean the outer surface with a non-abrasive cleanser and only connect the power supply
when the entire instrument surface is dry.
If liquid or moist solids enters the instrument, please immediately disconnect the power supply
and contact [e-mail]
•Surface stains on the instrument should be cleaned only by a clean, soft rag and detergent.
•The power must be disconnected before any maintenance or cleaning.
•Do not clean the instrument with any corrosive cleaning solutions.
•If the instrument is left unused for a long period, switch ‘OFF’ the power and store within a
dry, clean, level, and stable surface at normal temperature.
Problem
Causes
Solution
No power
The power cord is unplugged
or not plugged in correctly
Reinsert
Tripped Breaker
Reset once, if a further trip occurs,
contact
[email protected]
Caution!
Before any Maintenance or Inspection, the Power Cable
MUST be removed from the power socket.