Holodia HOLOFIT GO User manual

HOLOFIT GO
USER MANUAL
CONGRATULATIONS ON
YOUR HOLOFIT PURCHASE!

HOLOFIT by Holodia
WE MAKE CARDIO FITNESS ADDICTIVE
1) CONNECT YOUR HEADSET TO
WIFI
Put your headset on, go to the WIFI section and connect the
headset to your network, just like you would connect your
phone.* Use the controller received with your HOLOFIT to select
and click.
*Your headset might suggest connecting to WIFI on its own. You can follow this system dialogue to connect it as well.
**To click, use the controller that you receive in your kit.
2) CONNECT YOUR HEADSET TO
THE FITNESS MACHINE
A) When the HOLOFIT App starts, and after the 3-2-1 calibration
the virtual coach will take you to the Bluetooth settings. To
access them on your own, look down and click the Holodia logo.
C) Find the fitness machine in the panel on your right and click
it. Just make sure that you enable your fitness machine's
Bluetooth connection beforehand.
Your fitness machine is now paired with HOLOFIT Go.
NOTE: For the connection to work, make sure that your fitness machine is
disconnected from any other devices (i.e. your phone) before you put on
the headset.

A) You'll first have to put the battery you received in your
package into the sensor.
Open the back panel, put the battery in and close the back
panel. The sensor will now start working.
3) INSTALL THE CADENCE SENSOR
HOLOFIT by Holodia
WE MAKE CARDIO FITNESS ADDICTIVE
B) Attach the cadence sensor to the inside of one of the
pedals. Find a spot where it won't be touching you or the bike
while you're cycling.
Hook the sensor on using the elastic bands you received in
the package.
C) Finally, connect HOLOFIT to the cadence sensor using
Bluetooth. It will automatically be visible in the pairing
settings on HOLOFIT.
Refer to the previous page for step-by-step instructions.
(OPTIONAL)

4) DOWNLOAD THE HOLOFIT
COMPANION APP
HOLOFIT by Holodia
WE MAKE CARDIO FITNESS ADDICTIVE
Find the HOLOFIT companion app on Google Play or the App
Store and download it.
After registering, you'll have to log into your account every
time you workout.
1) Before you start your workout, open the app on your
phone and click the GO button.
2) On the next screen, select
HOLOFIT Go and a QR code will
appear.
3) Put your headset on and in
HOLOFIT click Login at the top of the
screen.
This will activate the camera on your
headset. Look down at your phone
and scan the QR Code.
You are now logged in and ready to
start exercising.

Long press the Power button of the headset.
Select Enter Kiosk Mode.*
Enter Kiosk mode if HOLOFIT is the only app you're using your
Vive Focus for. It means that whenever you turn your headset
on, HOLOFIT will automatically start.
OPTIONAL: VIVE FOCUS
5) ENTER INTO KIOSK MODE
HOLOFIT by Holodia
WE MAKE CARDIO FITNESS ADDICTIVE
*If you long press the Power button, a pop up will appear where you can select “shutdown”, “restart” or “enter/leave kiosk mode”. This popup
doesn’t have a cancel button. If you press it by mistake during usage, it is recommended you choose to restart.
6) UPDATE HOLOFIT GO WITH KIOSK
MODE ON
1) Leave the kiosk mode, if enabled, by long pressing the
Power Button of the headset. Select Leave Kisok Mode.
You'll be asked to enter the Kiosk Mode passcode. If you
haven't changed it yourself, the passcode is 2367.
2) Click on the Library icon at the bottom of the virtual desktop.
3) If an update is available, Update Available section will be
selectable.
In the Update Available section, hover over HOLOFIT Go tile, and
click the Update button using the remote controller.
4) Once the Update process is completed, you can re-enter into
the Kiosk Mode.

ENJOY
HOLOFIT
www.holodia.com
Copyright © 2019 Holodia SA.
All rights reserved.