FunTrek 130 Quick Guide
1. Appearance
FunTrek 130
HO L UX
Button Functions
Name Function
Touch Screen
The device uses touch screen controls
Right /
Power Button
When device is on, press right button to open
shortcut enu
When device is off, hold down right button for 3
seconds to power on
When device is on, hold down right button for 3
seconds to power off
Left Button When device is on, press the left button to
change the Main Menu, Trip Co puter and
Navigation screens
LED Status
Light
Charging: Blinks red
Full charged: Constant red light; red light
turns off when USB cable is disconnected
When powering up, the LED will light for 1
second and the display will turn on
2. Screen Operations
3. Mount Insta ation
(1) Please co bine the brackets and ake sure that the two ends are clipped together.
(2) Screw holder fir ly to the bracket.
(3) Open the other end of the bracket and clip it to the handlebar. Place rubber padding underneath the holder.
Adjust the thickness of the rubber padding to atch the actual thickness of the handlebar then tighten screws to
install the bicycle ount fir ly.
(4) Insert GPS into holder. When it click into place, tighten the screw on the back of the holder.
(5) To re ove the GPS, loosen the screw on the back of the holder, press lightly on the pressure tab protruding
fro the botto of the holder then re ove GPS.
(1) (2) (3) (4) (5)
Screen
Button
Light
Power
Button
Left
Right
Right
Left
Right
