Home Accents Holiday 1006215503 User manual

Safety Information
IMPORTANT SAFETY
INSTRUCTIONS
When using electrical products, basic precautions should always be
followed including the following:
a) READ AND FOLLOW ALL
SAFETY INSTRUCTIONS.
b)Thisproductisforindooruseonly. Theelectricalrating0.37A120V60
Hz.
c) Do not use seasonal products outdoors unless marked suitable for
indoor and outdoor use. When products are used in outdoor applications,
connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. If
one is not provided, contact a qualified electrician for proper installation.
d) This seasonal use product is not intended for permanent installation or
use.
e)Donotmountorplaceneargasorelectricheaters,fireplace,candlesor
other similar sources of heat.
f) Do not secure the wiring of the product with staples or nails, or place on
sharp hooks or nails.
g) Do not let lamps rest on the supply cord or on any wire.
h) Unplug the product when leaving the house, or when retiring for the
night, or if left unattended.
i) This is an electric product – not a toy! To avoid risk of fire, burns
personal injury and electric shock it should not be played with or placed
where small children can reach it.
j) Do not use this product for other than its intended use.
k) Do not hang ornaments or other objects from cord, wire, or light string.
l)Donot close doorsorwindows ontheproductorextensioncordsasthis
may damage the wire insulation.
m) Do not cover the product with cloth, paper or any material not part of
the product when in use.
n) Do not move the tree by pulling the tree tips or tree branches.
o)Readand follow allinstructions that areon the productorprovided with
the product.
p) SAVE THESE INSTRUCTIONS.
Package Contents
A. Tree top
Qty: 1 B. Tree center Qty: 1 C. Tree bottom Qty: 1
D. Stand with an eye
bolt
Qty: 1
E. Power cord
Qty: 1 F. Latch Qty: 2
7.5ft Fenwick Pine Micro Dot Tree
SKU# 1006215503
Assembling the tree stand
Step 1. Choose a location near a wall outlet.
Step2.Openthestandtoa90degreeangleuntiltheholelinesupwiththe
hole on the tube.
Step 3. Screw an eye bolt into the hole.
CAUTION! – ALWAYS UNPLUG YOUR
TREE FROM ITS POWER SOURCE
BEFORE ASSEMBLING OR
DISASSEMBLING.
Assembling the tree
Pleaseremove protective covers from the base of the pole for each tree
section before assembling.
Step1.Carefully insert bottom section (C) of tree into tree base and
tighten the screw. (See Fig. 1)
Step2.Insert the middle section (B) of the tree into the bottom section
(C). (See Fig. 2)
Step3.Insertthetopsection(A)intothemiddlesection(B). (SeeFig. 3)
Step4. Allowbranchestofallintoplaceorgentlypullbranchesupandout.
When adjusting branches be sure that all wires are free of branch
hinges. (SeeFig. 4)
Step 5. Shape the branches. Starting withtipsclosestto the pole, shape
onetiptotheright,onetotheleftandoneatthecenterofthemain
stem. Repeat pattern for each branch. (See Fig. 5)
Step 6. Plug the well-connected power cord from the tree section (C)
into a proper outlet.
Step 7. Please note this tree comes with a foot pedal switch for easy
illuminationandchangingfunctions.ThistreeisColorChanging,
the 8 lighting options available are:
1. Steady Warm White
2. Flashing Warm White
3. Fade In and Fade Out Warm White
4. Steady Multicolor
5. Flashing Multicolor
6. Fade In and Fade Out Multicolor
7. Sequential Multicolor & Warm White
8. Color Changing
These functions can be changed by pressing the foot pedal
switch
Pre-Assembly
Assembly

Turning on the tree
Plugthe well-connectedpowercordfromthetree section(C) intoaproper
outlet.
CAUTION:
1. Theproductconsistsofnon-replaceableLEDlamps.Toreducethe
risk of fire or electric shock, do not attempt to replace lamps or
modify string.
2. This product can only be used with theoriginal adapter, not other
brands of adapter.
Use and Care Instructions
a) Before using or reusing, inspect product carefully. Discard any
products that have cut , damaged, or frayed wire insulation or cords,
cracks in the lampholders or enclosures, loose connections, or
exposed copper wire.
b) When storing the product, carefully remove the product from
wherever it is placed, including tree, branches, orbushes, to avoid
any undue strain or stress on the product conductors, connections,
and wires.
c) When not in use, store neatly in a cool, dry location protected from
sunlight.
Care and Cleaning
Step 1. Remove all ornaments and decorations.
Step 2. Unplug the cord from the wall outlet.
Step 3. Gently lift the tree top straight up to remove from the center
section and fold all branches towards the pole.
Step 4. Repeat this step for the center and bottom tree sections.
Step 5. Carefully place all tree sections into a shipping box and tape it
shut.
Step 6. Store your tree in a cool, dry place away from sunlight.
Troubleshooting
Problem Solution
The tree
does not
light
Ensure that all tree sections are connected into each
other well by pressing each section down and
rotating. Make sure power cord plug is securely
inserted into a working electrical outlet.
If you are still experiencing problems with the tree
please call 1-877-527-0313 for instructions.
Loose branches
If a branch of thetree falls off, follow the steps belowto reinstall it with a
spare latch (F).
1) Place the branch into the slot of the bracket.
2) Insert a spare latch (F)
through the hole and
use diagonal pliers (not
included) to crimp the
latch (F). (See Fig. A)
The device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
Warning: Please note that changes or modifications not
expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference
by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
receiver.
- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician
for help.
Importer: Home Depot
Address: 2455 PACES FERRY ROAD ATLANTA, GA 30339
Tel: [phone]
Adapter Model No. TS-HH01-0120W120V

Operation