Home Accents Holiday 23PG90078 User manual

Christmas Tree
Model: 23PG90078
Sku # 1005 271 537
TM
Safety Information
IMPORTANT SAFETY
INSTRUCTIONS
a. READ AND FOLLOW ALL
SAFETY INSTRUCTIONS.
When using electrical products, basic precautions should always
be followed, including the following:
b. Do not use seasonal products outdoors unless marked suitable
for indoor and outdoor use. When products are used in outdoor
applications, connect the product to a Ground Fault Circuit
Interrupting (GFCI) outlet. If one is not provided, contact a
qualified electrician for proper installation.
c. This seasonal product is not intended for permanent installation
or use.
d. Do not mount or place the product near gas or electric heaters,
fireplaces, candles, or other similar sources of heat.
e. Do not secure the wiring of the product with staples or nails,
or place on sharp hooks or nails.
f. Do not let lamps rest on the supply cord or on any wire.
g. Unplug the product when leaving the house, when retiring for
the night, or if left unattended.
h. This is an electric product and not a toy! To avoid risk of fire,
burns, personal injury and electric shock it should not be played
with or placed where small children can reach it.
i. Do not use this product for other than its intended use.
j. Do not hang ornaments or other objects from cord, wire, or light
string.
k. Do not close doors or windows on the product or extensions
cords as this may damage the wire insulation.
l. Do not cover the product with cloth, paper, or any material that
is not a part of the product when in use.
m. This product is equipped with push-in type lamps. Do not twist
lamps.
n. Read and follow all instructions that are on the product or
provide with the product.
o.
SAVE THESE INSTRUCTIONS
Pre-Assembly
Package Contents
Part Description Quantity
A Tree top 1
B Tree center, Sticker 2 1
C Tree bottom, Sticker 1 1
D Tree stand 1
E Remote Control 1
NEED HELP? DO NOT RETURN TO STORE.
CALL: 1-855-HDHoliday (1-855-434-6543)
Monday - Friday 8am to 7pm EST, Saturday 9am to 6pm EST
NOTE: DEMO MODE ACTIVATED
Please reference “Demo Mode Instructions” for more details.
Assembly
Step 1.
Pull apart the legs of the stand so that they are snapped
into an x-shape, place the tree stand on a level surface.
To close the stand,press the metal button and fold the legs together.
Assembling the tree
This tree assmbles with Quick Set® feature
---Set up and light up your tree in less than 10 minutes!
Step 1. Remove the protective caps from the tree bottom and
insert the pole into the tree stand.
Note: Do not step on the tree stand legs during the setup.
This may deform the tree stand and may result in an
unbalanced tree.
Step 2. Continue by inserting the upper tree section(s) to the
lower section(s) until inserting the tree top.
Step 3. Shape the branches to your preference by working from
the bottom to the top. When adjusting branches, ensure
that all wires are free of branch hinges.
Step 4. Insert the adapter into the wall outlet. All your lights
should now be lit.
Step 5.
Shape the tree from the bottom to the top. Start with the
branches farthest from the pole – fan out in a star shape,
and continue until the entire tree is shaped.
Step 6. When finished shaping the branches, slightly upsweep
all branch tips for a uniform look.
Click
Assembling the tree stand
Top view Side view

Shape the branches to your preference by working from
the bottom to the top. When adjusting branches, ensure
90S
50S
90S
Tree top
Section 2
Section 1 80S
80S
80S
100S
80S
Control box
Adapter
To Be Plugged
Into Wall
Outlet
Foot Pedal
on/off Switch
Align both arrows
in a straight line
before sliding
down to insert
Open the
cap cover
Do Not Tamper
Internal Parts
TM
Step 1.
Grasp the power adapter or power cord plug,
and than unplug from the power outlet.
Do not pull the power cord.
LAMP REPLACEMENT
Step 2.
Lift up lamp lock tab, then pull the
lamp and plastic lamp base
straight out of the lamp-holder.
Step 3.
Replace with a new spare lamp
provided with this product.
(Reference figure only)
This tree package includes hinge pins, washers and bulbs for any
replacement or repair that you need to perform on your tree.
If extra parts are needed, contact the Customer Service Team at
1-855-HDHoliday (1-855-434-6543) from 8am to 7pm EST,
Monday through Friday, and 9am to 6pm EST, Saturday.
Repairing Loose Hinges
Step 1. Place the branch into the slot of the bracket
Step 2. Insert a new hinge pin through the holes of the bracket
and secure with a washer.
Maintenance
Spare parts
Turning on the tree
NOTE: If some bulbs do not light or flicker, search for any loose
plugs and/or broken, loose, or missing bulbs. Replace bulbs
promptly with the replacement bulbs provided in order to
maintain the performance and life expectancy of your tree.
Step 1. Connect the light strings of the tree together and plug
the adapter into a wall outlet.
Step 2. If the tree comes with a foot pedal, step on the On/Off
button.
Operation
1. Before using or reusing, inspect product carefully. Discard any
products that have cut, damaged or frayed wire insulation or
cords, cracks in the lampholders or enclosures, loose
connections, or exposed copper wire.
2. Before disassembling the tree, unplug the tree and remove all
ornaments and decorations.
3. Gently lift the tree top straight up to remove from the center
section and fold all branches towards the pole.
4. Repeat this step for the center and bottom tree sections.
5. When storing the product, carefully remove the product from
wherever it is placed, including tree, branches, or bushes,
to avoid any undue strain or stress on the product conductors,
connections, and wires. Cover the
protective cap on the poles to avoid
damaging the internal parts.
6. When not in use, store neatly in a cool,
dry location protected from sunlight.
Use and Care Instructions
Remote Control Instructions
Insulation Tab
1. Remove the insulation tab of the remote control.
2. This tree is preset to Demo mode.
Before selecting other light functions, the Demo mode has to be
deactivated. Follow the steps "To deactivate the Demo mode"
under Demo Mode Instructions to do so.
Selector Button
Light Controller
DUAL COLOR LIGHT CONTROLLER & REMOTE CONTROL
Combo
Remote Control
Combo1
Combo2
Combo5Combo4Combo3
WW-Multi
Fading
WW
Fading
Multi
Fading
Multi
Steady
WW
Steady
WW-Multi
Alternate
WW-Multi
Slow Fading
On/OffDemo
Rear of Remote Control
Choose the light effect by pressing the corresponding button.
You can also press the Selector button of the in-line light controller
to enjoy light effects in the following sequence:
(1) WW-Multi Fading: Warm White & Multicolor Fading
(2) WW Fading: Warm White Fading
(3) WW-Multi Alternate: Warm White & Multicolor Alternating
(4) WW Steady: Warm White Steady
(5) WW-Multi Slow Fading: Warm White& Multicolor Slow Fading
(6) Multi Steady: Multicolor Steady
(7) Multi Fading: Multicolor Fading
(8) Combo: Combination of Light Functions 1-2
(9) Combo1: Combination of Light Functions 1-3
(10) Combo2: Combination of Light Functions 1-4
(11) Combo3: Combination of Light Functions 1-5
(12) Combo4: Combination of Light Functions 1-6
(13) Combo5: Combination of Light Functions 1-7
Christmas Tree
Model: 23PG90078
Sku # 1005 271 537

TM
Troubleshooting
Problem Solution
The tree does not
light
Ensure that all tree sections are plugged into
each other and that the tree is plugged into
the wall. If your tree came with a foot pedal,
step on the On/Off button.
Check for loose, broken,or missing bulbsandreplace
as needed withthe replacement bulbs provided
CAUTION:
1. To reduce the risk of fire and electric shock:
a) Use only the power supply that was provided with this
product. Using a different adapter will damage the lights and
may cause fire, or electrical shock hazards.
b) Do not install on trees having needles, leaves or branch
coverings of metal or materials which look like metal.
c) Do not mount or support strings in a manner that can cut or
damage wire insulation.
2. The controller and remote controller (if included) can only be
used with this product.
To activate the DEMO mode:
1. With the tree plugged in, press the Demo Mode button of the
remote control or press and hold the Selector button of the in-line
light controller for 5 seconds.
2. The Clear Lights will blink 3 times. The tree is now in DEMO mode.
3. Within DEMO mode, the tree will display the COMBO pattern at all
times unless the function button is pressed to change the flashing
pattern. The tree will return to COMBO pattern whenever the
controller is idle for 30 seconds.
WARNING
1. Dispose used battery properly. Observe local regulations
regarding disposal of hazardous waste.
2. Ensure the batteries are installed correctly with regard to
polarity (+ and -).
3. This product is powered by a lithium battery. Due to their small
size, lithium batteries can easily be swallowed by children.
Ingestion of such batteries has been known to cause death.
4. This product contains a lithium battery which if swallowed has
been known to cause death.
5. Do not expose light set to moisture.
6. Remove batteries when not used for an extended period of time,
or when depleted.
7. Clean the battery contacts prior to battery installation.
8. The external flexible cable or cord of this luminaire cannot be
replaced; If the cord is damaged, the luminaire shall be
destroyed.
9. Dispose of used batteries properly by following directions on
batteries.
10. Use only CR2032 batteries for the remote controller.
11. DO NOT DISPOSE OF BATTERIES IN FIRE. BATTERIES MAY
EXPLODE OR LEAK.
To deactivate the DEMO mode:
This tree is preset to Demo Mode.
1. With the tree plugged in and in DEMO mode, press the Demo
Mode button of the remote control or press and hold the
Selector button of the in-line light controller for 5 seconds.
2. The multi-light will flash 5 times indicating that DEMO mode is
off.
3. The tree is now in normal mode. Flashing pattern can be set to
desired function and tree will remember the last setting until
new setting is selected.
Demo Mode Instructions
BATTERY REPLACEMENT
1. Locate the push button near the battery tray at the rear.
2. Using a pin or similar object with a fine tip, press and hold down
on the button while pulling on the battery tray to disconnect
the tray from the remote controller.
3. Remove the pin and continue to pull the battery tray out
completely.
4. Replace the old battery with a new one (Battery type: CR2032).
Be sure the new battery is installed with the correct polarity
(+ and -).
5. Push the battery tray back into the remote controller.
Selector Button
Light Controller
Demo Mode
Remote Control
Christmas Tree
Model: 23PG90078
Sku # 1005 271 537
Not Full?
Spread Branches
Run Extension Cord
Tree Topper? Branch Hanging Low?
Bend up
No Lights Working?
Check For Loose ConnectionEnsure pole is fully connected
Section Out?
This tree is preset to Demo Mode.
Lights Cycle Through
Functions?
Other Issue? Call 1-855-HDHoliday (1-855-434-6543)
To deactivate:
Press the DEMO button once.
Multicolor lights will blink 5
times.
To activate:
Press the DEMO button once.
Warm White lights will blink
3 times.
Remote Control
Demo
3V 3V
CR2032
3V
CR2032

FCC Cau�on:
Any Changes or modifica�ons not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Opera�on is subject to the following two
condi�ons: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired opera�on.
IMPORTANT NOTE:
Note: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protec�on against harmful interference in a residen�al installa�on. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instruc�ons, may cause harmful interference to radio communica�ons. However, there is no
guarantee that interference will not occur in a par�cular installa�on. If this equipment does
cause harmful interference to radio or television recep�on, which can be determined by turning
the equipment offand on, the user is encouraged to try to correct the interference by one or
more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separa�on between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
—Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radia�on exposure limits set forth for an uncontrolled
environment.