Home Accents Holiday 22RT5662235YX User manual

SKU # 1007 599 762
Model # 22RT5662235YX
Thank you!
We appreciate the trust and confidence you have placed in Home Accents
through the purchase of this 5ft Yuletide Lane MOTION LED Christmas Tree
Silhouette. We strive to continually create quality products designed to enhance
your home. Visit us online to see our full line of products available for your home
improvement needs. Thank you for choosing HomeAccents!
1-855-HDHoliday (1-855-434-6543)
HOMEACCENTSHOLIDAY.COM
ASSEMBLY INSTRUCTIONS
5ft Yuletide Lane MOTION LED Christmas Tree Silhouette
USEANDCAREGUIDE
PLANNING ASSEMBLY
Carefully remove all the parts from the box and place them on the ground. Many parts
are connected by the lighting string that runs throughout the item. Take special care not
to pull, cut or damage the lighting string. Read the entire manual prior to assembly and
identify all the parts included in the package against the parts list. It is recommended to
assemble parts of the product while laying flat on the ground or table versus standing
the item up to assemble the parts. If any parts are missing or damaged do not attempt
assembly but contact our customer service center or return to place of purchase with
purchase receipt.
Assembly of this product may require more than one person.
1-855-HDHoliday (1-855-434-6543)
Pre-Operation
CAUTION:Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on cord.
CAUTION:The lighting string on this product is rated at 14.4 Watts (0.12
Amps). Do not overload. Do not connect to another lighting string, decorative outfit or
other electrical products. Before you use or re-use this product inspect it carefully.
Discard or return to place of purchase with purchase receipt if the product has cuts,
damage, frayed wire insulation on cords, cracks in the socket enclosures, loose
connections, exposed copper wire or other obvious damage.
CareandCleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product connections, and wires. If the product is placed
somewhere other than the ground it should be well secured, flat and stable.
b. Carefully disassemble the unit taking caution not to cut any electrical wires.
c. Wipe the unit with a damp cloth and allow the unit to dry before storing.
d. Store the product neatly in a cool, dry location protected from sunlight.
Troubleshooting
a. Ensure that the ground or surface that the item sits on is flat and level
b. Be sure to plug the item correctly to a wall outlet or a UL Listed Power Cord
c. Ensure all parts are assembled properly per the Instruction Manual
d. If the item does not light check for loose or broken bulbs and connections
e. Do not plug into other electrical items
f. If the item has multiple Light String Cords be sure to plug in all cords
g. Check for Broken or Burned Out Fuse In Plug
Guarantee
What is Covered
The product is intended for residential seasonal use for 90 days maximum per year.
This product is covered by a 90 days limited guarantee due to defects in material and
workmanship. Return the product with purchase receipts to the location of purchase
for refund within 90 days of purchase.
What is Not Covered
This warranty does not cover commercial use, normal wear and tear, products not used in
accordance with directions provided on or with the product, burn out of bulbs or LEDS,
batteries, products that have been subjected to unauthorized repair and/or modification
and damage caused by shipping and improper handling, alterations, misuse, in store
display models or accidents. Questions, problems, missing parts? Before returning to the
store, call HomeAccents Holiday Customer Service 8 a.m.-6 p.m., EST, Monday-Friday
1-855-HDHoliday (1-855-434-6543)
Diagram of Parts
Parts List
Locater Name Qty.
A Star 1
B Top Section 1
C Half of Bottom Section 2
D Support Bar 1
E Base Stand 1
Hardware List
Locater Name Qty.
F Plastic Tie 15
G Cotter Pin 4
H Ground Stake 4
A
B
C
D
E
F
G
H
C

A
SSEMBLY
1 Assembling the Bottom Section
Insert the connecting rods on one half of Bottom Section (C) into the
connecting holes on the other half and fasten at the adjoining metal
frames with the Plastic Ties (F).
2 Assembling the Top Section to the Bottom Section
Insert the connecting rods on the bottom of the Top Section (B) into the
matching connecting holes on the top of the Bottom Section (C) and fasten
at the connecting loops with Plastic Ties (F).
3 Assembling the Star to Top Section
Insert the connecting rods on the bottom of Star (A) into the connecting holes
on the top of the Top Section (B) .
4 Assembling the Power Plug
Connect the power cord plugs together and secure with the built-in cap screw.
5 Assembling the Base Stand and Support Bar
Insert the connecting rods on the bottom of Bottom Section (C) into the
matching connecting holes on the Base Stand (E). Insert each hooked end
of the Support Bar (D) into the matching connecting holes on the back of
the Top Section (B) and the Base Stand (E) then secure with the Cotter
Pins (G). The Support Bar (D) comes with a swivel bar attached to stabilize
the Tree. Insert the hooked end of the swivel bar into the metal tube at the
back of the middle of the Bottom Section (C).Fasten at the hooked end of
Swivel Bar and adjacent iron wires of Bottom Section with the Plastic Tie(F).
6 Assembling the Ground Stakes
Insert the Ground Stakes (H) over the metal frame of the Base Stand (E) at
each corner then into the ground firmly.
H
E
D
B
G
E
C
F
F
A
B
C
F C
B
C
F