Home Accents Holiday 23SV23789 Parts list manual

FRONT
BACK
RIGHT
LEFT
1.21.1 2.1 2.2
NOTE: When connecting cables, ensure that the
arrow indicators on each cable end are lined up
with and pointing at each other. There is also a
groove and a rod like protrusion by these arrows
that fit into each other. Then firmly press the cables
together. Rotate the cable cap clockwise onto the
threading of the corresponding cable until firmly in
place.
NOTE:
Throughout the
instructions,
Right and Left
are relative to
the character.
The hooks on
the (A) Base are
towards the
back of the item.
Use Hex Key and
Screws (X) for
base assembly.
PARTS LIST
A. Base x 1
B. Lower LED Pole x 1
C. Ghost Base x 1
D. Ghost Segment 1 x 1
E. Upper LED Pole x 1
F. Ghost Segment 2 x 1
G. Ghost Segment 3 x 1
H. Chest x 1
I. Left Arm x 1
J. Right Arm x 1
K. Left Hand x 1
L. Right Hand x 1
M. Head x 1
N. Left Arm Cap x 1
O. Right Arm Cap x 1
P. Upper Chest Cap x 1
Q. Lower Chest Cap x 1
R. Segment 3 Cap x 1
S. Segment 2 Cap x 1
T. Loop Screw x 1
U. Tether Cable x 1
V. Base Extensions x 8
W. Stakes x 4
X. Small Parts Bag x 1
Y. Adapter * x 1
* Power Adapter Spec
Input: 120V ~ 50/60Hz
Output: 5.9V 2A
A
A
A
B
D
D
F G
HIJ
O
K
P
Q R S
T
U
V
W
X
X
Y
L
M
N
C
C
C
B
B
B
B
B
1/4
E
E
E
USA/ États-Unis 1009043216
ASSEMBLY REQUIRES AT LEAST 2 ADULTS, 3 ADULTS ARE RECOMMENDED. PLEASE FOLLOW THE STEP BY STEP GUIDE
AND ENJOY YOUR TOWERING GHOST!
EASY ASSEMBLY AND OPERATION INSTRUCTIONS
23SV23789 Towering Ghost
READ AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE
TM
Means It's
Locked
Click
Locking Pin
IMPORTANT TIPS:
• Ensure that the item's adapter is plugged in at the Function Control Box and in
the wall.
• Ensure that the red indicator light on the function control box is on the desired
setting.
• If not functioning properly (ex: LEDs don't light up), ensure that cables are
connected to their corresponding cable as shown in the instruction sheet.
• Ensure that the floor or surface that the item sits on is flat and level.
• If the item still does not work, contact SVI Customer Service from 8:30am to
5:30pm PST at 1-855-428-3921, email [e-mail], or call
Home Accents Holiday Customer Service from Mon-Fri 8:00am to 7:00pm and
Sat 9:00 am To 6:00 pm EST at 1-855-HDHOLIDAY (1-855-434-6543).
X 6 Screws
Hex Key
IF ANY PART IS MISSING OR BROKEN, DO NOT ATTEMPT TO ASSEMBLE THE PRODUCT AND CONTACT SVI CUSTOMER SERVICE FROM 8:30AM TO 5:30PM PST AT
1-855-428-3921, EMAIL [e-mail], OR CALL THE HOME DEPOT CUSTOMER SERVICE AT 1-855-434-6543 (1-855-HDHOLIDAY).
A
X
B

3.1
3.2
4.1
4.2
Outer box
NOTE: Screw
the (T) Loop
Screw into
the area
inside of the
(H) Chest as
shown.
D
F
F
G
G
H
H
H
I
2/4
E
NOTE: Lean the Towering Ghost
against the box it came with for easier
assembly. 2 adults are strongly
recommended for this step.
5.2
5.1 6.1
6.2
CAUTION: Cable may have sharp ends, use caution when assembling.
If cable cannot reach, the (H) Chest of the Towering Ghost needs to be lifted while in
its laying position. This should enable the cable to reach.
NOTE: Lift the Towering Ghost and rotate the box 90 degrees onto its side so the
box appears taller. Set the Towering Ghost back down onto the box.
UA
T
H
T
U
I
H
H
A
C
J
J
J
O
I
N
G
X
H
X

9.2
9.1
A
F
G
H
H
I
K
V
V
VV
V
V
V
V
W W
WW
L
M
3/4
7.3
7.1 7. 2 8.1 8.2 8.3
8.4
Ensure that the wire is
not pinched between the
(N) Chest and (S) Head.
If your application requires additional
stability, add weights on top of the base
(for example sand bags – not included).
Note: Insert (W)
Stakes through
holes at the
corners of the (A)
Base and into the
ground as shown
in Figure 9.2.
If your application
needs sturdier stakes,
check out SKU
1009-049-293 at The
Home Depot (sold
separately).
WA
After
connecting
the wires,
hide the
excess inside
of the
available
cavity in the
(I, J) Arms.
J
HP
Q
R
S
5.9V
Y
ADAPTER
5.9V
THE TOWERING GHOST
IS NOW FULLY
ASSEMBLED. PLUG IN
AND TURN ON TO LET
THE FUN BEGIN!
H
X

4/4
NOTE: Make
sure the
waterproof cap
is covering the
Try Me receiv-
er at all times
when not in
use.
1-855-434-6543
(1-855-HDHoliday)
USE WEIGHTS
ON THE BASE
IF LIGHTS DON'T
WORK
© Seasonal Visions International
Berkeley, CA 94710
Tel: [phone]
All Rights Reserved
MADE IN CHINA
WARNING
This item is not a toy and should be used for decoration only. This item contains small parts that
can be a choking hazard. Keep all plastic and wire parts away from children.
1. Please use the adapter supplied by manufacturer.
2. Please assemble item according to instructions. Connect all wires according to matching color.
3. Children should be supervised by adults. Item should not be grabbed, as it becomes a tipping
hazard. Keep flammables away from the adapter, as it heats up during operation.
Please view all instructions carefully before assembling. Save this instruction sheet for future
reference.
CARE AND STORAGE INSTRUCTIONS
When not in use, store this product in its original packing. Keep away from heat and moisture.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
CAUTION: Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures: Reorient or relocate the receiving antenna, Increase the
separation between the equipment and receiver. Connect the equipment into an outlet on a
circuit different from that to which the receiver is connected. Consult the dealer or experienced
radio/TV technician for help.
CAN ICES-003(B)/NMB-003(B)
WARNING:
• Lay product down before a storm or strong winds.
• Don't climb or pull on product.
• Don't add to or modify product.
• Assemble and place the product on level surfaces only.
• Don't push or tilt product.
THE TOWERING GHOST IS COMPATIBLE WITH EXTERNAL TIMERS AND PRESERVES
ITS SETTING WHEN THE POWER IS TURNED OFF/ON.
5.9V
OPERATION INSTRUCTIONS:
1. Plug the power adapter into a standard power outlet and adjust the settings on the function control
box, located on the (C) Ghost Base, as desired.
2. Settings:
OFF· TRY ME/
ARRET·ESSAIE-MOI
ON /
MARCHE
TIMER /
MINUTEUR
LED MODE This button will change the Ghost's LED effect. There are 4 different LED
effects that can be cycled through; Fade On/Off Effect, Bottom to Top Lighting
Effect, Fade On/Off Effect with Sudden Flash, and Steady On Main Features
with Fade On/Off Secondary Features.
This button will activate/deactive the lights of the Towering Ghost.
Timer begins daily cycles of ON for 6hrs, then lights off for 18hrs.
This setting will deactivate the lights of the item. This mode also allows the
item to be activated if triggered by using a Step Here Try Me Activation Pad
(Not Included). The item will operate for one function cycle with each Try Me
activation.
5.9V