Home Accents Holiday TY084-1118-1C User manual

USEAND CARE GUIDE
4-Piece 18in Spiral Tree Pathway Lights
THANK YOU
We appreciate the trust and confidence you have placed in Home Accents through the purchase of this
4-Piece 18in Spiral Tree Pathway Lights. We strive to continually create quality products designed to
enhance your home. Visit us online to see our full line of products available for your home improvement
needs. Thank you for choosing Home Accents!
Guarantee
What is Covered
The product is intended for residential seasonal use for approximately 90 days per year. This product is
covered by a 90 day limited guarantee due to defects in material and workmanship. Return the product
with purchase receipt to the location of purchase for refund within 90 days of purchase.
What is Not Covered
This warranty does not cover commercial use, normal wear and tear, products not used in accordance
with directions provided on or with the product, burn out of bulbs or LEDs, batteries, products that have
been subjected to unauthorized repair and/or modification and damage caused by shipping and
improper handling, alterations, misuse or accidents. Questions, problems, missing parts? Before
returning to the store, call Home Accents Holiday Customer Service 8 a.m.-6 p.m., EST, Monday-Friday
1-877-527-0313
HOMEACCENTSHOLIDAY.COM
SKU # 597 341
Model # TY084-1118-1C
Pre-Assembly
PLANNING ASSEMBLY
Carefully remove all the parts from the box and place them on a flat surface. Read the
entire manual prior to assembly and identify all the parts included in the package against
the parts list. If any parts are missing or damaged do not attempt assembly. Contact our
customer service center or return to store. Assembly of this product may require more
than one person.
PACKAGE CONTENTS
Package Contents/Parts List
Part Description Quantity
A Start Tree Topper 4
B Spiral Tree 4
C Driving Cap 4
D Plastic Cap 4
E Pole Section 4
F Tree Stand 4
G Fuse 2
H Replacement Bulbs 6
A.
B.
C. D.
E.
F.
G. H.

Assembly
Assembling the Spiral Tree
For Indoor Use:
(1) Place the Tree Stand (F) flat on the floor. Fig.1
(2) The Tree Stand has a short vertical stub projecting upwards from it. Insert one Pole Section(E),
with big the end down, into the vertical stub. Attached the Plastic Cap (D)to the top of the Pole
Section.Fig.1
(3) Hold the Spiral Tree (B)at the top of the Pole section. Insert the Pole Section into the disc at the
top of the Spiral Tree. Let the SpiralTreeuncoiloverthePoleSection(E).Fig.2
(4) Place the Star Tree Topper(A) into the holder at the top of the Spiral Tree. Fig.2
(5) Attach the hooks at the end of the two supporting strings at the base of the Spiral Tree into the
metal holes on the stand. Fig.2
For Outdoor Use:
(1) One of the arms of the Tree Stand is tapered. Drive the sharp arm of the Tree Stand into the
ground using the Driving (C) on the opposite end of the Tree Stand, as shown in. Fig. 3
(2) Repeat Steps 2-5 from Indoor Use above. (Note: Be sure to remove Driving Cap)
Pre-Operation
CAUTION:Grasp the plug to insert or remove from the power source. Do
not unplug by pulling on cord.
CAUTION:The lighting string on this product is rated at 57.6 Watts
(0.48Amps). Do not overload. Do not connect to other lighting strings, decorative outfit or
other electrical products. Before you use or re-use this product inspect it carefully. Return
to Store or discard if the product has cuts, damage or frayed wire insulation on
cords, cracks in the socket enclosures, loose connections or exposed copper wire.
CareandCleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any undue
strain or stress on the product, wire and lighting connections. If the product is placed
somewhere other than the ground it should be well secured and stable.
b. Wipe the unit with a damp cloth and allow the unit to dry before storing.
c. Store the product neatly in a cool, dry location protected from sunlight.
FOR INDOOR AND OUTDOOR USE
Fig. 1 Fig. 2
Fig.3