Home Accents Holiday 22RT1902214 User manual

SKU # 1007 581 587
Model # 22RT1902214
Thank you!
We appreciate the trust and confidence you have placed in Home Accents
through the purchase of this 4ft LED Walrus. We strive to continually create
quality products designed to enhance your home. Visit us online to see our
full line of products available for your home improvement needs. Thank you
for choosing Home Accents!
1-855-HDHoliday (1-855-434-6543)
HOMEACCENTSHOLIDAY.COM
ASSEMBLY INSTRUCTIONS
4ftLEDWalrus
USEANDCAREGUIDE
PLANNING ASSEMBLY
Carefully remove all the parts from the box and place them on the ground. Many parts
are connected by the lighting string that runs throughout the item. Take special care not
to pull, cut or damage the lighting string. Read the entire manual prior to assembly and
identify all the parts included in the package against the parts list. It is recommended to
assemble parts of the product while laying flat on the ground or table versus standing
the item up to assemble the parts. If any parts are missing or damaged do not attempt
assembly but contact our customer service center or return to place of purchase with
purchase receipt.
Assembly of this product may require more than one person.
1-855-HDHoliday (1-855-434-6543)
Pre-Operation
CAUTION:Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on cord.
CAUTION:The lighting string on this product is rated at 7.2 Watts (0.06
Amps). Do not overload. Do not connect to another lighting string, decorative outfit or
other electrical products. Before you use or re-use this product inspect it carefully.
Discard or return to place of purchase with purchase receipt if the product has cuts,
damage, frayed wire insulation on cords, cracks in the socket enclosures, loose
connections, exposed copper wire or other obvious damage.
CareandCleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product connections, and wires. If the product is placed
somewhere other than the ground it should be well secured, flat and stable.
b. Carefully disassemble the unit taking caution not to cut any electrical wires.
c. Wipe the unit with a damp cloth and allow the unit to dry before storing.
d. Store the product neatly in a cool, dry location protected from sunlight.
Troubleshooting
a. Ensure that the floor or surface that the item sits on is flat and level
b. Be sure to plug the item correctly to a wall outlet or a UL Listed Power Cord
c. Ensure all parts are assembled properly per the Instruction Manual
d. If the item does not light check for loose or broken bulbs and connections
e. Do not plug into other electrical items
f. If the item has multiple Light String Cords be sure to plug in all cords
g. Check for Broken or Burned Out Fuse In Plug
Guarantee
What is Covered
The product is intended for residential seasonal use for 90 days maximum per year.
This product is covered by a 90 days limited guarantee due to defects in material and
workmanship. Return the product with purchase receipts to the location of purchase
for refund within 90 days of purchase.
What is Not Covered
This warranty does not cover commercial use, normal wear and tear, products not used in
accordance with directions provided on or with the product, burn out of bulbs or LEDS,
batteries, products that have been subjected to unauthorized repair and/or modification
and damage caused by shipping and improper handling, alterations, misuse, in store
display models or accidents. Questions, problems, missing parts? Before returning to the
store, call HomeAccents Holiday Customer Service 8 a.m.-6 p.m., EST, Monday-Friday
1-855-HDHoliday (1-855-434-6543)
Diagram of Parts
Parts List
Locater Name Qty.
A Hat 1
B Head 1
C Mouth / Tusk 1
D Half of Body 2
E Front Flippers 2
F Gift Box 1
G Scarf 1
H Rear Flippers 2
Hardware List
Locater Name Qty.
I Spare Bulb 3
J Spare Fuse 2
K Plastic Tie 15
L Ground Stake 4
A
B
D
E
F G I K
J L
C
H
E D
H

A
SSEMBLY
1 Assembling the Body
Align the two Halves of Body (D) with each other then insert the connecting
rods on one half into the connecting holes on the other half and fasten at
connecting loops with Plastic Ties (K).
2 Assembling the Head to Body
Insert the connecting rods on the bottom of Head (B) into the connecting holes
at the top of the Body (D) and fasten at the connecting loops with Plastic Ties
(K).
3 Assembling the Hat and Mouth / Tusk
Insert the connecting rods on the bottom of Hat (A) into the matching holes
on the top of Head (B). Insert the connecting rods of Mouth / Tusk (C) into
the matching holes of Face (B).
4 Assembling the Front and Rear Flippers and Gift Box
Insert the connecting rods on the Front Flippers (E) and Rear Flippers (H) into
the matching connecting holes on the Body (D) and fasten at the connecting
loops with Plastic Ties (K). Insert the connecting rods on the Gift Box (F) into
the matching holes on the Left Front Flipper (E) and fasten at the connecting
loops with Plastic Tie (K).
5 Assembling the Scarf
Wrap the Scarf (G) around the neck of the Walrus.
6 Assembling the Ground Stakes
Secure the Walrus to the ground with the Ground Stakes (L) by placing the
Ground Stake over the metal ground connecting loop then firmly into the
ground.
D
K
D
B
D
K
A
B
C
E
D
F
K
H
E
H
G
L