Home Accents Holiday TG66M2Z29D03 User manual

Christmas Tree
Model# TG66M2Z29D03
Sku # 1001 053 444
IMPORTANT SAFETY
INSTRUCTIONS
a. READ AND FOLLOW ALL
SAFETY INSTRUCTIONS.
n. SAVE THESE INSTRUCTIONS
b. This product is for indoor use only.
c. This seasonal product is not intended for permanent
installation or use.
d. Do not mount or place the product near gas or electric
heaters, fireplaces, candles, or other similar sources of heat.
e. Do not secure the wiring of the product with staples or nails,
or place on sharp hooks or nails.
f. Do not let lamps rest on the supply cord or on any wire.
g. Unplug the product when leaving the house, when retiring
for the night, or if left unattended.
h. This is an electric product and not a toy! To avoid risk of fire,
burns, personal injury and electric shock it should not be
played with or placed where small children can reach it.
i. Do not use this product for other than its intended use.
j. Do not hang ornaments or other objects from cord, wire, or
light string.
k. Do not close doors or windows on the product or extensions
cords as this may damage the wire insulation.
l. Do not cover the product with cloth, paper, or any material
that is not a part of the product when in use.
m.Read and follow all instructions that are on the product or
provided with the product.
When using electrical products, basic precautions should always
be followed, including the following:
Step 1. Remove the protective caps from the tree bottom (C) and
insert the pole into the tree stand (D).
Step 2. Remove the protective caps from the tree center (B) and
insert the pole into the tree bottom (C) .
Step 3. Insert the tree top (A) into the tree center (B).
Step 4. Shape the branches to your preference by working from
the bottom to the top. When adjusting branches, ensure
that all wires are free of branch hinges.
Step 5. Connect the plug(s) securely to the extension cord(s) as
per the color labels indicated in attached photo and plug
the adaptor into the wall outlet
Step 6. Shape the tree from the bottom to the top. Start with the
branches farthest from the pole – fan out in a star shape,
and continue until the entire tree is shaped.
Step 7. When finished shaping the branches, slightly upsweep all
branch tips for a uniform look.
*Electrical Rating For The Tree
(For Indoor Use Only)
Input:120V, 60Hz, 0.25A Max.
Output: 29V 0.45A
Control box
Safety Information
Pre-Assembly
Step 1. Grasp the power adaptor or power cord plug, and than
unplug from the power outlet.Do not pull the power cord.
LAMP REPLACEMENT
Step 2. Lift up lamp lock tab, then pull the
lamp and plastic lamp base straight
out of the lamp-holder.
Step 3.
Replace with a new spare lamp
provided with this product.
( Reference figure only)
USER SERVICING INSTRUCTIONS
Assembling the tree
Assembling the tree stand
Step 1. Choose a location near a wall outlet.
Step 2. Pull apart the legs of the stand so that they are snapped
into an x-shape, place the tree stand (D) on a level surface.
Step 3. To close the stand, press the metal button and fold the
legs together.
Click
Assembly
Section 2
Tree Top
Section 1 100S
100S
Adaptor
To Be Plugged
Into Wall
Outlet
Foot Pedal
on/off Switch
90S
80S
TM
Package Contents
A
B
C
D
Tree top
Tree center, sticker 2
Tree bottom, sticker 1
Tree stand
1
1
1
1
Quantity
Part Description
Top view Side view

Christmas Tree
Model# TG66M2Z29D03
Sku # 1001 053 444
Troubleshooting
Problem Solution
The tree does
not light
Ensure that all tree sections are plugged
into each other and that the tree is
plugged into the wall. If your tree came
with a foot pedal, step on the
On/Off button.
Check for loose, broken, or missing replace
as needed with the replacement bulbs
provided
Turning on the tree
NOTE: If some bulbs do not light or flicker, search for any loose
plugs and/or broken, loose, or missing bulbs. Replace bulbs
promptly with the replacement bulbs provided in order to
maintain the performance and life expectancy of your tree.
Step 1. Connect the light strings of the tree together and plug
the adaptor into a wall outlet.
Step 2. If the tree comes with a foot pedal, step on the On/Off
button.
Operation
Spare parts
Repairing Loose Hinges
This tree package includes hinge pins, washers, bulbs for any
replacement or repair that you need to perform on your tree.If
extra parts are needed, contact the Customer Service Team at
1-877-527-0313 between the hours of 8 am and 5 pm EST, Monday
through Friday.
Step 1. Place the branch into the slot of the bracket
Step 2. Insert a new hinge pin through the holes of the bracket
and secure with a washer.
Maintenance
CAUTION:Use only power adaptor that was provided
with this product. Using a different power adaptor will damage
the lights and cause fire, electrical shock hazard.
Press the selector button on the “Dual Color Light
Controller” or “Remote Controller” to select among:
(1) CLEAR - MULTI: FADING
(2) CLEAR: FADING
(3) CLEAR - MULTI: ALTERNATING
(4) CLEAR: STEADY
(5) CLEAR - MULTI: SLOW FADING
(6) MULTI: STEADY
(7) MULTI: FADING
(8) COMBINATION
HOW TO USE THE DUAL COLOR LIGHT CONTROLLER
AND REMOTE CONTROL:
User servicing instructions
Light Controller
Selector
Button
Step 1. Remove all ornaments and decorations.
Step 2. Unplug the adaptor from the wall and then unplug each
section of the tree.
Step 3. Gently lift the tree top straight up to remove from the
center section and fold all branches towards the pole.
Step 4. Repeat this step for the bottom tree section.
Step 5. Carefully place all tree sections into a shipping box and
tape it shut.
Step 6. Store your tree in a cool, dry place away from sunlight.
Care and Cleaning
TM