Home Accents Holiday TY133-1817 Quick start guide

OMS THD SKU# 1003 155 266
Model # TY133-1817
Thank you!
We appreciate the trust and confidence you have placed in Home Accents
through the purchase of this 6.5ft Pre-Lit ELF HEAD TREE. We strive to
continually create quality products designed to enhance your home.
Visit us online to see our full line of products available for your home
decoration needs. Thank you for choosing Home Accents!
1-877-527-0313
HOMEACCENTSHOLIDAY.COM
ASSEMBLY INSTRUCTIONS
6.5ft Pre-Lit ELF HEAD TREE
USEANDCAREGUIDE
PLANNING ASSEMBLY
Carefully remove all the parts from the box and place them on a flat surface. Please
note that many of the parts are connected by the lighting string that runs throughout
the item. Remove the parts with care not to damage the lighting string or parts. Read
the entire manual prior to assembly and identify all the parts included in the package
against the parts list. If any parts are missing or damaged do not attempt assembly.
Contact our customer service center or return the item to place of purchase with
purchase receipt. Assembly of this product may require more than one person.
Pre-Operation
CAUTION:Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on cord.
CAUTION:The lighting string on this product is rated at 9.6 Watts
(0.08 Amps). Do not overload. Do not connect to another lighting string, decorative
outfit or other electrical products. Before you use or re-use this product, inspect it
carefully. Discard or return to place of purchase with purchase receipt if the product
has cuts, damage, frayed wire insulation on cords, cracks in the socket enclosures,
loose connections or exposed copper wire.
CareandCleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product connections and wires. If the product is placed
somewhere other than the ground it should be well secured and stable.
b. Wipe the unit with a damp cloth and allow the unit to dry before storing.
c. Store the product neatly in a cool, dry location protected from sunlight.
Guarantee
What is Covered
The product is intended for residential seasonal use for 90 days per year. This
product is covered by a 90 days limited guarantee due to defects in material and
workmanship. Return the product with purchase receipts to the location of purchase
for refund within 90 days of purchase.
What is Not Covered
This warranty does not cover commercial use, normal wear and tear, products not
used in accordance with directions provided on or with the product, burn out of bulbs
or LEDS, batteries, products that have been subjected to unauthorized repair and/or
modification and damage caused by shipping and improper handling, alterations,
misuse or accidents. Questions, problems, missing parts? Before returning to the
store, call Home Accents Holiday Customer Service 8 a.m.-6 p.m., EST,
Monday-Friday
Diagram of Parts
Hardware
Parts List
Locater Name Qty.
A Halves of Elf
Head 2
B Tree Top Section 1
C Tree Middle
Section 1
D Tree Bottom
Section 1
E Scarf 1
F Base Stand 1
G Ears 2
Hardware List
Locater Name Qty.
H Large Twist Screw 3
I Plastic Ties 10
J Spare Fuse 8
K Spare Bulb 4
H I J K
A B C
D E F
G

A
SSEMBLY
1 Assembling the Elf Head
Insert the connecting rods on one Half of Elf Head (A) into the
matching holes on the other Half of Elf Head and fasten them
together at the connection loops with Plastic Tie (I)
2 Assembling the Ears to the Elf Head
Insert the connecting rods on the Ears (G) into the matching holes on
Head and fasten them together at the connection loops with Plastic
Tie (I).
3 Assembling the Base Stand
Pull apart the Base Stand (F) so the legs are separated. Secure the
Stand in right position with the Large Twist Screws (H) on the outside
of the metal tab.
4 Assembling the Bottom Section to the Base Stand
Insert the Bottom Section of the Tree (D) into the top of the Base Stand (F)
and secure with the Large Twist Screws (H).
5 Assembling the Middle Section to the Bottom Section of
the Tree
Insert the Middle Section (C) to the matching hole of the top of the
Bottom Section (D) of the Tree.
6 Assembling the Top Section to the Middle Section of the
Tree
Insert the Top Section (B) into the matching hole of the top of the Middle
Section (C) of the Tree.
7 Assembling the Elf Head to the Tree
Insert the connecting rod on the bottom of the Elf Head (A) into the
connecting hole at the top of the Tree.
8 Wrap the Scarf around the Elf 's neck and slightly form the
branches
Wrap the Scarf (E) on the Elf 's neck and slightly form the branches to
your desired look.