Home Accents Holiday 23RTY6852314 User manual

SKU # 1009 466 749
Model # 23RTY6852314
Thank you!
We appreciate the trust and confidence you have placed in Home Accents
through the purchase of this 8ft Yuletide Lane GIANT-SIZED LED Collapsible
Snowman. We strive to continually create quality products designed to enhance
your home. Visit us online to see our full line of products available for your home
improvement needs. Thank you for choosing HomeAccents!
1-855-HDHoliday (1-855-434-6543)
HOMEACCENTSHOLIDAY.COM
ASSEMBLY INSTRUCTIONS
8ft Yuletide Lane GIANT-SIZED LED
Collapsible Snowman
USEANDCAREGUIDE
PLANNING ASSEMBLY
Carefully remove all the parts from the box and place them on the ground. Many parts
are connected by the lighting string that runs throughout the item. Take special care not
to pull, cut or damage the lighting string. Read the entire manual prior to assembly and
identify all the parts included in the package against the parts list. It is recommended to
assemble parts of the product while laying flat on the ground versus standing the item
up to assemble the parts. If any parts are missing or damaged do not attempt assembly
but contact our customer service center or return to place of purchase with purchase
receipt.
Assembly of this product may require more than one person.
1-855-HDHoliday (1-855-434-6543)
Pre-Operation
CAUTION:Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on cord.
CAUTION:The lighting string on this product is rated at 19.2 Watts (0.16
Amps). Do not overload. Do not connect to another lighting string, decorative outfit or
other electrical products. Before you use or re-use this product inspect it carefully.
Discard or return to place of purchase with purchase receipt if the product has cuts,
damage, frayed wire insulation on cords, cracks in the socket enclosures, loose
connections, exposed copper wire or other obvious damage.
CareandCleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product connections, and wires. If the product is placed
somewhere other than the ground it should be well secured, flat and stable.
b. Carefully disassemble the unit taking caution not to cut any electrical wires.
c. Wipe the unit with a damp cloth and allow the unit to dry before storing.
d. Store the product neatly in a cool, dry location protected from sunlight.
Troubleshooting
a. Ensure that the ground or surface that the item sits on is flat and level
b. Be sure to plug the item correctly to a wall outlet or a UL Listed Power Cord
c. Ensure all parts are assembled properly per the Instruction Manual
d. If the item does not light check for loose or broken bulbs and connections
e. Do not plug into other electrical items
f. If the item has multiple Light String Cords be sure to plug in all cords
Guarantee
What is Covered
The product is intended for residential seasonal use for 90 days maximum per year.
This product is covered by a 90 days limited guarantee due to defects in material and
workmanship. Return the product with purchase receipts to the location of purchase
for refund within 90 days of purchase.
What is Not Covered
This warranty does not cover commercial use, normal wear and tear, products not used in
accordance with directions provided on or with the product, burn out of bulbs or LEDS,
batteries, products that have been subjected to unauthorized repair and/or modification
and damage caused by shipping and improper handling, alterations, misuse, in store
display models or accidents. Questions, problems, missing parts? Before returning to the
store, call HomeAccents Holiday Customer Service 8 a.m.-6 p.m., EST, Monday-Friday
1-855-HDHoliday (1-855-434-6543)
Diagram of Parts
Parts List
Locater Name Qty.
A Hat & Body 1
B Arm 2
C Scarf 2
D Scarf Ribbon 1
E Base Stand 1
F Upper Support Pole 1
G Middle Support
Bracket 1
H Lower Support Pole 1
I Stabilizing Pole 3
Hardware List
Locater Name Qty.
J Bolt & Wingnut 8
K Plastic Tie 10
L Ground Stake 8
M Anchoring String 4
A B
F G H I
C
D
E
J
K
L M
B

A
SSEMBLY
1 Assembling the Lower Support Pole and Middle
Support Bracket to Base Stand
Place the Collapsible Hat & Body (A) flat on the ground. Remove the plastic
ties with a scissor. Insert the Lower Support Poles (H) [with the tapered end
up] into the connecting tube of the Base Stand (E) and secure with the
built-in locking pin. Stack the Middle Support Bracket (G) onto the Lower
Support Pole (H) and secure with the built-in locking pin.
2 Assembling the Stabilizing Poles
Each of the three Stabilizing Poles (I) has connection holes at both ends. The
Support Bracket (G) and the Base Stand (E) have metal tabs with connection
holes. Align the connection holes at both ends of the Stabilizing Poles (I) with
the connection holes on the Support Bracket (G) and Base Stand (E) then
secure with Bolt & Wingnut (J).
3 Assembling the Upper Support Pole to Hat & Body
Guide the Upper Support Pole (F) through the center loop of the collapsible
Hat & Body (A) then insert the tapered end of Support Pole (F) into the short
connecting tube at the top inside of the Hat. The metal ring at the middle of
Upper Support Pole (F) is a stop for the Hat.
4 Assembling the Upper Support Pole to Support Bracket
Stack the bottom of the Upper Support Pole (F) onto the top of the Middle
Support Bracket (G) and secure with the built-in locking pin. Unfold the
Snowman and allow it to fall down towards the ground around the structure.
5 Assembling the Arms to Body
Connect the power cord plugs together from Arms (B) to the Body (A) and
secure with the built-in cap screw. Insert the connecting rods of each Arm (B)
through the holes on the sides of Body (A) and into the end of the Support
Bracket (G) "arms".
6 Secure the Snowman to Base Stand
Hook the four metal chains attached to the Base Stand (E) onto the rim on the
round metal frame at the bottom of Body (A).
7 Assembling the Scarf
Wrap the Scarf (C) around the Snowman's neck and fasten at the connecting
loops with Plastic Tie (K). Insert the connecting rod on the Scarf Ribbon (D)
into the connecting hole on the Scarf (C).
8 Assembling the Ground Stakes and AnchoringStrings
Hook the plastic clipped end on each of the Anchoring Strings (M) onto the
matching connecting loops at the shoulder area on each Arm (B). Attach the
free looped end of each Anchoring String (M) to the hooked end of the Ground
Stake (L) then tightly pull the Ground Stakes and Anchoring Strings out and
away from the Snowman evenly then firmly plant the Ground Stake into the
ground. Secure the remaining 4 Ground Stakes over the Metal Base Stand (E)
at 4 corners then into the ground firmly.
H
G
E
G
E
I J
I I
F
A
G
F
B
B
A
G A
E
C
D
K
M
L
B
A
E