Home Accents TY169-1824-2 User manual

OMS THD SKU # 1003 002 171
Model # TY169-1824-2
Thank you!
We appreciate the trust and confidence you have placed in Home Accents
through the purchase of this 72in 175 Light LED Skeleton Playing Piano. We
strive to continually create quality products designed to enhance your home.
Visit us online to see our full line of products available for your home
decoration needs. Thank you for choosing Home Accents!
1-877-527-0313
HOMEACCENTSHOLIDAY.COM
ASSEMBLY INSTRUCTIONS
72in 175 Light LED SKELETON PLAYING PIANO
USEANDCAREGUIDE
PLANNING ASSEMBLY
Carefully remove all the parts from the box and place them on a flat surface. Please
note that many of the parts are connected by the lighting string that runs throughout
the item. Remove the parts with care not to damage the lighting string or parts. Read
the entire manual prior to assembly and identify all the parts included in the package
against the parts list. If any parts are missing or damaged do not attempt assembly.
Contact our customer service center or return the item to place of purchase with
purchase receipt. Assembly of this product may require more than one person.
Pre-Operation
CAUTION:Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on cord.
CAUTION:The lighting string on this product is rated at 12 Watts
(0.1Amps). Do not overload. Do not connect to another lighting string, decorative
outfit or other electrical products. Before you use or re-use this product, inspect it
carefully. Discard or return to place of purchase with purchase receipt if the product
has cuts, damage, frayed wire insulation on cords, cracks in the socket enclosures,
loose connections or exposed copper wire.
CareandCleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product connections and wires. If the product is
placed somewhere other than the ground it should be well secured and stable.
b. Wipe the unit with a damp cloth and allow the unit to dry before storing.
c. Store the product neatly in a cool, dry location protected from sunlight.
Guarantee
What is Covered
The product is intended for residential seasonal use for 90 days per year. This
product is covered by a 90 days limited guarantee due to defects in material and
workmanship. Return the product with purchase receipts to the location of
purchase for refund within 90 days of purchase.
What is Not Covered
This warranty does not cover commercial use, normal wear and tear, products not
used in accordance with directions provided on or with the product, burn out of bulbs
or LEDS, batteries, products that have been subjected to unauthorized repair and/or
modification and damage caused by shipping and improper handling, alterations,
misuse or accidents. Questions, problems, missing parts? Before returning to the
store, call Home Accents Holiday Customer Service 8 a.m.-6 p.m., EST,
Monday-Friday
Diagram of Parts
Hardware
Parts List
Locater Name Qty.
A Piano Lid 1
B Piano Body 1
C Piano Leg 1
D Piano Leg 1
E Piano Leg 1
F Keyboard 1
G Pedals 1
H Back Support 1
I Piano Stool 1
J Skeleton 1
Hardware List
Locater Name Qty.
K Cotter Pin 2
L Bolt & Wingnut 9
M Ground Stake 7
N Plastic Tie 10
O Spare Fuse 2
P Spare Bulb 5
K L M N O P
A B C
D E F
J
G H I

A
SSEMBLY
1 Assembling the Piano Body to the Keyboard
Insert the connecting rods on the back side of the Keyboard (F) into
the matching holes on the front of the Piano Body (B) then fasten
them together at the connecting loops on both sides with Bolt &
Wingnut (L). Insert the connecting rods on the top of the Pedals
(G) into the holes in the middle of the bottom side of the
Keyboard (F) then fasten them together at the connecting loops
with the Plastic Ties (N).
2 Assembling the Piano Legs to Piano Body
Insert the connecting rods on the top of the Piano Legs (C, D,E) into
the matching holes on the underside of the Piano Body (B) and
Keyboard (F) then secure them together at the connecting loop with
Bolt & Wingnut (L).
3 Assembling the Piano Stool
Unfold the legs attached inside the Piano Stool then secure them to
the Piano Stool at the connecting loops with the Bolt & Wingnut. Insert
the connecting rods on the Back Support (H) for Piano Stool into the
matching holes on the top of the Piano Stool (I) then fasten them
together at the connecting loop with the Plastic Tie (N).
4 Assembling the Piano Lid to the Piano Body
Insert the connecting rods on the down side of the Piano Lid (A) into
the matching holes on the Piano Body then secure them together with
the Cotter Pins (K).
5 Assembling the Piano Lid Support Bar and Music Rack
The Piano Lid has a support rod attached to it on the inside. Open the
Piano Lid (after Step #4) then extend the rod down and attach it to the
side of the Piano Body. Use the Cotter Pin to secure. On top of the Key
board is the Music Rack laying flat. Lift up the Music Rack and extend
the support bar on the back side into the connecting hole on top of the
Keyboard.
6 Positioning the Skeleton and Securing Piano to the
Ground
Place the Skeleton on the center of Piano Stool facing the Piano. Place
the Skeleton's hands on the Keyboard.Adjust Skeleton's feet on the
Pedals and floor as desired.Attach the back of the Skeleton (just
above the waist) to the Back Support using Plastic Ties. Insert Ground
Stakes (M) through each Piano Leg and each Piano Stool Leg then into
the ground.