Home Accents TY405-1911 User manual

SKU # 1004 391 984
OMS THD SKU # 1004 253 725
Model # TY405-1911
Thank you!
We appreciate the trust and confidence you have placed in Home Accents
through the purchase of this 4.5 ft Polar Wishes LED Deer with Bow. We
strive to continually create quality products designed to enhance your home.
Visit us online to see our full line of products available for your home
improvement needs. Thank you for choosing HomeAccents!
1-877-527-0313
HOMEACCENTSHOLIDAY.COM
ASSEMBLY INSTRUCTIONS
4.5 ft Polar Wishes LED Deer with Bow
USEANDCAREGUIDE
PLANNING ASSEMBLY
Carefully remove all the parts from the box and place them on the ground. Many
parts are connected by the lighting string that runs throughout the item. Take special
care not to pull, cut or damage the lighting string. Read the entire manual prior to
assembly and identify all the parts included in the package against the parts list. It is
recommended to assemble parts of the product while laying flat on the ground
versus standing the item up to assemble the parts. If any parts are missing or
damaged do not attempt assembly but contact our customer service center.
*Assembly of this product may require more than one person.
Pre-Operation
CAUTION:Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on cord.
CAUTION:The lighting string on this product is rated at 7.2 Watts (0.06
Amps). Do not overload. Do not connect to another lighting string, decorative outfit or
other electrical products. Before you use or re-use this product inspect it carefully.
Discard or return to place of purchase with purchase receipt if the product has cuts,
damage, frayed wire insulation on cords, cracks in the socket enclosures, loose
connections, exposed copper wire or other obvious damage.
CareandCleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product connections and wires. If the product is placed
somewhere other than the ground it should be well secured and flat.
b. Carefully disassemble the unit taking caution not to cut any electrical wires.
c. Wipe the unit with a damp cloth and allow the unit to dry before storing.
d. Store the product neatly in a cool, dry location protected from sunlight.
Trouble Shooting
a. Ensure that the floor or surface that the item sits on is flat and level
b. Be sure to plug the item correctly to a wall outlet or a UL Listed Power Cord
c. Ensure all parts are assembled properly per the Instruction Manual
d. If the item does not light check for loose or broken bulbs and connections
e. Do not plug into other electrical items
f. If the item has multiple Light String Cords be sure to plug in all cords
g. Check for Broken or Burned Out Fuse In Plug
Guarantee
What is Covered
The product is intended for residential seasonal use for 90 days per year. This
product is covered by a 90 days limited guarantee due to defects in material and
workmanship. Return the product with purchase receipts to the location of purchase
for refund within 90 days of purchase.
What is Not Covered
This warranty does not cover commercial use, normal wear and tear, products not
used in accordance with directions provided on or with the product, burn out of bulbs
or LEDS, batteries, products that have been subjected to unauthorized repair and/or
modification and damage caused by shipping and improper handling, alterations,
misuse, in store display models or accidents. Questions, problems, missing parts?
Before returning to the store, call Home Accents Holiday Customer Service 8 a.m.-6
p.m., EST, Monday-Friday
Diagram of Parts
Parts List
Locater Name Qty.
A Antler 2
B Ear 2
C Head/Neck 1
D Body 1
E Tail 1
F Front Leg 2
G Hind Leg 2
H Bow Tie 1
Hardware List
Locater Name Qty.
I Spare Fuse 2
J Spare Bulb 3
K Plastic Tie 15
L Ground Stake 4
A
D
B
C
E
FG
H
I
J
K
L

A
SSEMBLY
1 Assembling the Legs to the Body
Insert the metal connecting rods at the top of each Leg (F,G) into the
matching connecting holes on the underside of the Body (D).
2 Securing the Legs to the Body
Fasten the Legs and Body together at the connecting loops with Plastic
Ties (K). The Legs come with metal bars attached to stabilize the Deer.
Insert the hooked end of the metal bars into the metal nut on the opposite
Leg.
3 Assembling the Head/Neck to the Body
Insert the connecting rods on the bottom of the Head & Neck (C) into
the matching connecting holes on the top edge of the Body (D) and
fasten together at the connecting loops with the Plastic Ties (K).
4 Assembling the Antlers to the Body
Insert the connecting rods on both Antlers (A) into the matching connecting
holes at the top of Head (C).
5 Assembling the Ears to the Body
Insert the connecting rods on both Ears (B) into the matching connecting
holes at the top of Head (C). Note: The Ears go to the outside of the
Antlers.
6 Assembling the Tail
Insert the connecting rod on Tail (E) into the connecting hole at the rear
of the Body (D).
7 Assembling the Bow to the Deer
Insert the wires of the Bow Tie (H) through the holes of the body then
twist the wires together to secure.
8 Assembling the Ground Stakes
Insert the Ground Stakes (L) over the metal frame at each hoof then firmly
into the ground.
D
F G
K
D
K
C
C
A
B
C
E
D
H
L