
Assembly
Assembling the Scarecrow
Step1. Stack the first piece of Support Pole (F) into the round Base Stand (G) with the tapered end
upwards and then insert second piece into the first piece. Insert the tapered end of second
piece of Support Pole into the matching hole inside the Body of Scarecrow (D). (FIG.1)
Step 2. Align two halves of Pumpkin Head (C) with each other and insert the rod of one half into the
holes on the other half then fasten with the Plastic Ties (I). Insert the rods below the
assembled Pumpkin Head (C) into the matching holes at the top of Body (D) then fasten
with Plastic Ties. (FIG.2)
Step 3. Attach the Arms (E) to the Body and fasten with Plastic Ties. (FIG.2)
Step 4. Place the Hat (B) onto the top of the Pumpkin Head and attach the Bird (A) onto the top of Hat.
(FIG.3)
Step 5. Insert Ground Stakes (H) into the ground at the base of the Scarecrow. (FIG.3)
Pre-Operation
CAUTION:Grasp the plug to insert or remove from the power source.
Do not unplug by pulling on cord.
CAUTION:The lighting string on this product is rated at 40.8 Watts
(0.34Amps). Do not overload. Do not connect to another lighting string, decorative
outfit or other product. Before you use or re-use this product inspect it carefully.
Return the product to place of purchase with receipt if the product has cuts, damage,
frayed wire insulation on cords, cracks in the socket enclosures, loose connections
or exposed copper wire.
CareandCleaning
a. Carefully remove the product from wherever it is placed. This helps to avoid any
undue strain or stress on the product conductors, connections, and wires. If the
product is placed somewhere other than the ground it should be well secured and
stable.
b. Wipe the product with a damp cloth and allow the product to dry before storing.
c. Store the product neatly in a cool, dry location protected from sunlight.
FOR INDOOR AND OUTDOOR USE
FIG.2
FIG.1
FIG.3