Home Decorators Collection 1471310818 User manual

MARTINGALE 48"GRC TABLE
Please read over this instruction manual as it will save time in the
assembly of this product.
Note: Prior to assembly, please open and lay parts out on a clean, soft
flat surface to avoid any damages to the product’s finish.
HDC#:1471310818 MFG#:FRA80468ST
page 1-8

Caution:
The Martingale table was made for explicit purpose of providing outdoor
functions and is not to be used as a toy. This product is not intended for
inclement/severe weather in any form including, but not limited to: rain,
hail, sleet, snow and/or wind. Manufacturer recommends that with
formidable weather approaching you store and/or cover this table. Do
not locate product near any open flame. Do not use product as a support.
Do not shake, lean or climb on product. Children under age of 10, near
the product, should be supervised by a competent adult at all times. This
product is NOT intended for commercial use and will void the warranty.
WARRANTY
Yotrio Corporation, City of Industry, CA. 91748, extends three year frame
limited warranty to the original purchaser as a sign of our dedication to
the highest possible quality standards. The warranty is designed to
cover Martingale table under normal residential use. The warranty is
non-transferable and void if the furniture is used in non-residential
environment and/or has been abused. The warranty also becomes void
in the event table has been damaged by acts of God, calamity or misuse.
This warranty does not cover in the event of inclement weather such as
rain, hail, sleet, snow or wind. We reserve the right to make substitutions
with similar merchandise, if the model in questions is no longer in
production. The manufacturer recommends that with ANY formidable
weather approaching you cover and store your table in a safe location.
CARE AND MAINTENANCE:
For best results, clean the frame with damp cloth and dry thoroughly.
This will help prevent mildew by removing dirt particles that may
accumulate. Do not use abrasive materials or cleaners. In order to
prolong the life of your table, when not in use or in inclement weather
(rain, hail, sleet, snow, wind), fire, extreme heat and freezing conditions,
the table needs to be stored in a dry, sheltered place.
page 2-8

DO NOT RETURN TO RETAILER
IF YOU HAVE ANY QUESTIONS OR CONCERNS
PLEASE VISIT OUR WEBSITE AT:
www.yotrioint.com
OR TOLL FREE AT:
1-800-245-2217
MONDAY-FRIDAY 8:30 AM TO 5:00 PM PACIFIC STANDARD TIME / 11:30
AM TO 8:00PM EASTERN STANDARD TIME
Warranty Coverage Requirements:
1. Copy of your Original Store Receipt.
2. Pictures of the damaged parts.
3. You must know the name of your product and any corresponding
item numbers as well as the name of the store where you
purchased the item.
4. Please gather all of this information BEFORE you call customer
service.
page 3-8

Parts Check List
Please remove all parts carefully from box and lay out on clean, soft
surface to protect product’s finish. Keep protective covering on table top
until final step.
①
Table Leg with channel – 1 PC
Table Leg – 1PC
Table Top – 1PC
②
③
page 4-8

A. M6X20 Bolt– 12PC B. M6 Washer – 12PCS
C. Hex wench– 1PC
page 5-8

1. Slide the table leg (3) through the center of the table leg with channel
(2) until the center holes on both legs align. Attach the table legs
together using M6x20 bolts (A) and M6 washers (B). Use the hex
wrench (C) to loosely tighten all the bolts
Do not tighten all the bolts!
page 6-8

.
2. Lay the table top (1) upside down on a soft surface.
Attach the assembled table legs to the table top (1) using
M6x20 bolts (A) and M6 washers (B). Use the hex wrench
(C) to loosely tighten all the bolts.
Do not tighten all the bolts!
page 7-8

4.Remove the protective covering from the table top (1).
3. Once all the bolts are in place. Tighten all the bolts with the
hex wrench (C). Turn the table right side up. Check to
ensure the table is tightly assembled and stable before use.
page 8-8