Home Decorators Collection FSA10012 User manual

page 1-9
FRENCH BISTRO CHAIR 2 PACK
Please read over this instruction manual as it will save time in the
assembly of this product.
Note: Prior to assembly, please open and lay parts out on a clean, soft
flat surface to avoid any damages to the product’s finish.
HDC#:1472010820 MFG#:FSA10012

page 2-9
Caution:
The French Bistro chair was made for explicit purpose of providing
outdoor functions and is not to be used as a toy. This product is not
intended for inclement/severe weather in any form including, but not
limited to: rain, hail, sleet, snow and/or wind. Manufacturer recommends
that with formidable weather approaching your store and/or cover this
chair. Do not locate product near any open flame. Do not use product as
a support. Do not shake, lean or climb on product. Children under age of
10, near the product, should be supervised by a competent adult at all
times. This product is NOT intended for commercial use and will void the
warranty.
WARRANTY
Yotrio Corporation, City of Industry, CA. 91748, extends three year frame
limited warranty to the original purchaser as a sign of our dedication to
the highest possible quality standards. The warranty is designed to
cover French Bistro chair under normal residential use. The warranty is
non-transferable and void if the furniture is used in non-residential
environment and/or has been abused. The warranty also becomes void
in the event this chair has been damaged by acts of God, calamity or
misuse. This warranty does not cover in the event of inclement weather
such as rain, hail, sleet, snow or wind. We reserve the right to make
substitutions with similar merchandise, if the model in questions is no
longer in production. The manufacturer recommends that with ANY
formidable weather approaching you cover and store your chair in a safe
location.
CARE AND MAINTENANCE:
For best results, clean frame with damp cloth and dry thoroughly. This
will help prevent mildew by removing dirt particles that may accumulate.
Do not use abrasive materials or cleaners. In order to prolong the life of
your French Bistro chair, when not in use or in inclement weather (rain,
hail, sleet, snow, wind), fire, extreme heat and freezing conditions, the
chair needs to be stored in a dry, sheltered place.

page 3-9





DONOTRETURNTORETAILER
IF YOU HAVE ANY QUESTIONS OR CONCERNS
PLEASE VISIT OUR WEBSITE AT:
www.yotrioint.com
OR TOLL FREE AT:
1-800-245-2217
MONDAY-FRIDAY 8:30 AM TO 5:00 PM PACIFIC STANDARD TIME / 11:30
AM TO 8:00PM EASTERN STANDARD TIME
YOTRIO CUSTOMER CARE

Warranty Coverage Requirements:
1. Copy of your Original Store Receipt.
2. Pictures of the damaged parts.
3. You must know the name of your product and any corresponding
item numbers as well as the name of the store where you
purchased the item.
4. Please gather all of this information BEFORE you call customer
service.

page 4-9
Parts Check List
Please remove all parts carefully from box and lay out on clean,
soft surface to protect product’s finish.
①Chair Seat –2PCS
Chair Leg–2PCS
Chair Frame–2PCS ②
③④Leg Connector –4PCS

page 5-9
A .Hex bolt –20PCS
M6X15mm
B. Hex bolt –8PC
M6X30mm
C. Washer –28 PCS
D. Hex wench– 1PC

page 6-9
1.Attach Chair Seat (2) to Chair Frame (1)with 4pcs of Hex Bolt (A) and
4pcs of Washer(C). Use Hex Wrench(D) to loosely secure.
Do not tighten yet!

page 7-9
.
2. Attach Chair Leg (3) to Chair Seat (2)with 6pcs of Hex
Bolt(A) and 4pcs of Washer(C). Use Hex Wrench(D) to
loosely secure.
Do not tighten yet!

page 8-9
3. Attach 2 pieces of the Leg Connectors (4) to assembled
Chair Frame (1) and Chair Leg (3) with 4pcs of Hex Bolt(B)
and 4pcs of Washer(C). Use Hex Wrench (D) to loosely
secure.
Do not tighten yet!

page 9-9
4.Tighten all the bolts with Hex Wrench (D). Check to ensure
the chair is tightly assembled and stable before use.
5. Repeat steps 1 – 4 for second chair.