Home Decorators Collection WSFP60ECHD-19 User manual

THANK YOU
We appreciate the trust and confidence you have placed in Home Decorators Collection through the purchase of this fireplace console
We strive to continually create quality products designed to enhance your home Visit us online to see our full line of products available
for your home improvement needs Thank you for choosing Home Decorators Collection!
OMSID # 207000441
Model # WSFP60ECHD-19
ASSEMBLY INSTRUCTIONS
Montauk Shore 60 in. Media Console ith Infrared Electric Fireplace
in Antique White & Medium Cherry Finish
Questions, problems, missing parts? Before returning to the store,
call Home Decorators Collection Customer Service
8 a.m. - 7 p.m., EST, Monday-Friday
9 a.m. - 6 p.m., EST, Saturday
1-800-986-3460
HOMEDEPOT.COM/HOMEDECORATORS

2
Table of Contents
Table of Contents ............................................................... 2
Safety Information .............................................................. 2
Warranty ............................................................................ 2
Pre-Assembly ..................................................................... 2
Planning Assembly ....................................................................2
Tools required ...........................................................................2
Hard are Included ....................................................................3
Package Contents .....................................................................4
Assembly .......................................................................... 5
Care and Maintenance .......................................................16
Safety Information
Please read and understand these instructions before assembling
and using this console. Save these instructions for future reference.
MAXIMUM RECOMMENDED WEIGHT LOADS
WARNING:
This unit is not intended for use ith CRT TVs. Use only
ith flat panel TVs and audio/video equipment meeting
recommended size and eight limits. Never use ith larger/heavier
than recommended flat panel TVs or equipment. To avoid instability,
place flat panel TV in the center of the unit; the base of the
television must be able to rest on the supporting surface of the
unit ithout over-hanging the edges. Improperly positioned flat
panel TVs, or flat panel TVs or other equipment that exceed
recommended size and eight limits could fall off or break the unit,
causing possible serious injury.
Warranty
We are confident that you ill be delighted ith this purchase. Should this product be defective in orkmanship or materials, or fail under normal
use, e ill repair or replace it for a period of up to one (1) year from date of purchase.
This arranty gives you specific rights and you may also have other rights hich vary from state to state.
Contact the Customer Service Team at 1-800-986-3460 or visit .HomeDepot.com/homedecorators.
Pre-Assembly
PLANNING ASSEMBLY
Compare all parts ith the Hard are Included and Package Contents list. If any part appears missing or damaged, do not assemble this product
and contact the Customer Service Team at 1-800-986-3460.
TOOLS REQUIRED
Phillips
scre driver
(not provided)
Maximum load 22.6 kg / 50 lb
P
lace
TV
behind
the
stopper
F
its
up
to
most
1
77
.
8
cm /
70
in
.
flat panel TVs
Maximum load 61.2 kg / 135 lb
Maximum load 6.8 kg / 15 lb

3 HOMEDEPOT COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance
Pre-Assembly (continued)
HARDWARE INCLUDED
NOTE: Hard are not sho n to actual size.
Part
Description
Quantity
Part
Description
Quantity
AA
Wood do el
44
+ 2 extra
KK
Medium ood s
cre
4
+ 1 extra
BB
Cam
l
ock
41
+ 2 extra
LL
Cam
l
ock
c
over
8
+ 1 extra
CC
Cam
b
olt
41
+ 2 extra
MM
Shelf pin
8
+ 1 extra
DD
Pan head s
cre
4
+ 1 extra
NN
Knob
2
EE
Magnetic catch
2
OO
Knob bolt
2
FF
L
-
shaped metal brace
2
PP
Straight metal plate
2
GG
Corner connector
4
QQ
Acrylic stopper
1
HH
Short ood
s
cre
12
+ 1 extra
RR
Glue
1
II
Washer head
scre
42
+
2
extra
SS
Touch
-
up
p
en
1
JJ
Long ood s
cre
4
+ 1 extra
TT
Tipping
r
estraint
h
ard are
k
it
2
LL
AA BB CC DD EE FF GG HH II
JJ
KK
MM
NN OO PP
QQ RR
TT SS

4
Pre-Assembly (continued)
PACKAGE CONTENTS
Part
Description
Quantity
Part
Description
Quantity
A
Top
p
anel
1
N
Right upper s
ide
p
anel
1
B
Center shelf
1
O
Left upper p
artition
p
anel
1
C
Bottom panel
1
P
Right upper p
artition
p
anel
1
D
Bottom
back stretcher
1
Q
Adjustable
s
helf
2
E
Bottom
front
m
olding
1
R
Upper
b
ack
p
anel
1
F
Left lo er s
ide
p
anel
1
S
Middle
crossbar
1
G
Right lo er s
ide
p
anel
1
T
Middle
stile
2
H
Left lo er p
artition
p
anel
1
U
Dra er
2
I
Right lo er p
artition
p
anel
1
V
Right lo er
b
ack
p
anel
1
J
Left
d
oor
1
Fireplace insert
1
K
Right
d
oor
1
Remote control ith battery
1
L
Left lo er
b
ack
p
anel
1
M
Left upper s
ide
p
anel
1
V
A
B
C
D
E
FGHI
JKL
MOPN Q
STU
R

5 HOMEDEPOT COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance
Assembly
1
Scre ing the cam bolts
NOTE: Do not fully tighten all bolts until you finish assembling all parts. Once assembled, go back and fully tighten all bolts. This ill make the
assembly easier.
□Unpack the unit and confirm that you have all the hard are and required parts. Assemble the unit on a carpeted floor or the empty
carton to avoid any scratches.
□Securely scre the cam bolts (CC) into the designated plastic bushings on the top panel (A) and the bottom panel (C) using a Phillips
scre driver.
2
Scre ing the cam bolts
□
Securely scre the cam bolts (CC) into the designated
plastic bushings
on the lo er
side
p
anel
s
(F and G) and the lo er
p
artition
p
anel
s
(H and I) using a Phillips scre driver.
CC
H
I
G
F
CC
C
A

6
Assembly (continued)
3
Assembling the cam bolts
and magnetic catches
□
Securely scre the cam bolts (CC) into the designated
plastic bushings
on the
center shelf
(B)
on
both sides
.
□Align t o magnetic catches (EE) to the pilot holes on the center shelf (B) ith the magnetic plates facing the finished edge. Then attach
the magnetic catches (EE) in place using t o pan head scre s (DD) per catch.
4
Attaching the
middle stiles
NOTE: Refer to the dowel and cam lock assembling guide drawings in this step for further clarification on how to properly glue in
the wooden dowels and install cam locks Apply this method whenever instructed to install wood dowels and cam locks
□Fasten one middle stile (T) to the left lo er partition panel (H) using t o ood do els (AA) and t o cam locks (BB).
□Repeat the same procedure to combine the other middle stile (T) and right lo er partition panel (I) together.
EE
DD
CC
B
B
T
H
I
T
GLUE
XXFINAL
1 2 43

7 HOMEDEPOT COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance
Assembly (continued)
5
Installing the bottom back stretcher
□
Align and attach the
bottom
back stretcher (D) to the
bottom panel
(C) by using four ood do els (AA) and four cam locks (BB).
6
Attaching the
lo er partition panels
□
Glue
four ood do els (AA) into the inner holes of the lo er
p
artition
p
anel
s
(H and I) and attach them to the
bottom panel
(C) by using
four long ood scre s (JJ).
C
D
AA
C
JJ
JJ
H
I
AA

8
Assembly (continued)
7
Installing the lo er side panels
□
Glue
six ood do els (AA) into the inner holes of
the
bottom panel
assembly
at both ends
.
□Align the large holes on both side panels (F and G) ith the inserted ood do els (AA) and press them together. Attach the side panels
(F and G) in place by engaging six cam locks (AA), as sho n.
8
Installing the middle crossbar
□
Align and attach the
middle
crossbar
(
S
) to the
center shelf
(B) by using t o ood do els (AA) and three cam locks (BB).
B
S
BB
BB
AA
AA
C
G
F

9 HOMEDEPOT COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance
Assembly (continued)
9
Installing the center shelf
□
Glue
eight
ood do els (
AA
) into the
top
inner holes of
the
previous
assembl
y
.
□Ask for assistance to position the center shelf (B) onto the inserted ood do els (AA). Attach the center shelf (B) in place by
engaging eight cam locks (BB).
10
Attaching the upper side panels and partition panels
□
Glue
eight
do els (AA) into the inner holes of the upper side panels (M and N) and
p
artition
p
anel
s
(O and P)
.
A
ttach them to the
center shelf (B) by engaging eight cam locks (AA).
B
M
N
O
P
F
G
H
I
B
AA

10
KK
II
GG
C
E
F
G
II
Assembly (continued)
11
Attaching the top panel
□
Glue
eight
ood do els (
AA
) into
the
top inner
holes
on
the
upper
side panels (
M
and
N
) and
p
artition
p
anel
s
(
O
and
P
)
. Position the top
panel (A) onto the inserted ood do els (AA) and fasten it in place ith eight cam locks (BB).
12
Attaching the bottom front molding
□
Align and attach the
bottom front
m
olding
(E) to the lo er side panels (F and G)
ith
four
medium ood
s
cre
s
(KK)
.
□With the pilot holes as a guide, fasten four corner connectors (GG) at the bottom joints bet een the bottom panel molding (E) and the
bottom panel (C) using t o asher head scre s (II) per corner connector. Tighten all scre s ith a Phillips scre driver.
M
N
O
P
A