Home Decorators Collection 7151-NDM User manual

THANK YOU
We appreciate the trust and condence you have placed in Home Decorators Collection through the purchase of this light xture. We strive
to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home
improvement needs. Thank you for choosing Home Decorators Collection!
USE AND CARE GUIDE
LED PENDANT
Questions, problems, missing parts? Before returning to the store,
call Home Decorators Collection Customer Service
8 a.m. - 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-800-986-3460
HOMEDEPOT.COM/HOMEDECORATORS
Item #1005579002
1005638433
Model #7151-NDM
DIS-7151-NDM

2
Table of Contents
Table of Contents ............................2
Safety Information............................2
Warranty ..................................2
Pre-Installation..............................3
Planning Installation ...............................3
Tools Required ....................................3
Hardware Included.................................3
Package Contents .................................4
Installation.................................5
Operation..................................6
Care and Cleaning............................6
Troubleshooting .............................6
Safety Information
□Consult a qualied electrician if you have any electrical
questions.
□NOTE: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for
help.
□This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
□The following responsible party designated in FCC §2.909 is
responsible for this declaration:
Bel Air Lighting
28104 Witherspoon Pkwy. Valencia CA 91355
CAUTION: Inspect the wire insulation for any cuts,
abrasions, or exposed copper that may have resulted during
shipping. If there is a defect in the wire, do not attempt
installation. Please call our Customer Service Team at
1-800-986-3460.
WARNING: Before starting installation of this xture
or removal of a previous xture, disconnect the power by
turning off the circuit breaker or by removing the fuse at the
fuse box.
WARNING: Any changes or modications to this unit not
expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
Warranty
The manufacturer warrants this lighting xture to be free from defects in materials and workmanship for a period of three (3) years from
date of purchase. This warranty applies only to the original consumer purchaser and only to products used in normal use and service. If
this product is found to be defective, the manufacturer’s only obligation, and your exclusive remedy, is the repair or replacement of the
product at the manufacturer’s discretion, provided that the product has not been damaged through misuse, abuse, accident, modications,
alterations, neglect, or mishandling. This warranty shall not apply to any product that is found to have been improperly installed, set-up,
or used in any way not in accordance with the instructions supplied with the product. This warranty shall not apply to a failure of the
product as a result of an accident, misuse, abuse, negligence, alteration, faulty installation, or any other failure not relating to faulty material
or workmanship. This warranty shall not apply to the nish on any portion of the product, such as surface and/or weathering, as this is
considered normal wear and tear. The manufacturer does not warrant and specially disclaims any warranty, whether express or implied,
of tness for a particular purpose, other than the warranty contained herein. The manufacturer specically disclaims any liability and
shall not be liable for any consequential or incidental loss or damage, including but not limited to any labor / expense costs involved in the
replacement or repair of said product.
Contact the Customer Service Team at 1-800-986-3460 or visit www.homedepot.com/homedecorators.

3 HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Pre-Installation
PLANNING INSTALLATION
□Read all instructions before installation.
□This xture can be installed as an up-light or as a down-light.
□To avoid damaging this product, assemble it on a soft, non-abrasive surface, such as carpet or cardboard.
□Keep your receipt and these instructions for proof of purchase.
TOOLS REQUIRED
Ladder Safety
goggles
Electrical
tape
Phillips
screwdriver
Flat blade
screwdriver Pliers Wire
strippers
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
AA BB
CC DD
Part Description Quantity
AA Mounting bracket 1
BB Mounting screw 2
CC Wire nut 3
DD Set screw (preinstalled) 4

4
Pre-Installation (continued)
PACKAGE CONTENTS
___________A
Part Description Quantity
A Light xture 1

5 HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Installation
1 Attaching the mounting bracket to the
junction box
□Remove the preinstalled set screws (DD) to separate the
mounting unit (AA).
□Attach mounting unit (AA) to the junction box (not included)
with mounting screws (BB).
AA
BB
DD
AA
A
2 Making the electrical connections
□Connect the copper wire on the light xture (A) to the
mounting bracket (AA) by securing it with the preinstalled
ground screw.
□Connect the black to black (power), the white to white
(neutral) and copper wire to ground wire with the wire
nuts(CC) and secure with electrical tape (not included).
NOTE: If the wires from the xture are the same
color,attach the black line wire with H markings to the black
wire and the white line wire with N markings to the white
wire. Connect the green line wire with G markings to the
green screw on the mounting bracket.
CC
3 Secure the light xture
□Secure the light fixture (A) to the junction box by placing
it over the mounting unit (AA) and securing it with the
previously removed set screws (DD). DD
AA
A

6
Operation
1 Turning the light on
□Turn the light switch on to activate the xture.
Care and Cleaning
□Clean the lamp with a soft, dry cloth.
□Do not use any cleaners with chemicals, solvents, or harsh abrasives.
Troubleshooting
Problem Possible Cause Possible Cause
The power is off. Ensure the power supply is On.
There is a faulty wire connection. Check the wiring.
The circuit breaker is off. Ensure the circuit breaker is in the ON position.
The fuse blows or circuit
breaker trips when the
light is turned on.
There are crossed wires or the
power wire is grounding out.
Check the wire connections.
Contact a qualied electrician or call the Customer Service Team at
1-800-986-3460.

Questions, problems, missing parts? Before returning to the store,
call Home Decorators Collection Customer Service
8 a.m. – 7 p.m., EST, Monday – Friday, 9 a.m. – 6 p.m., EST, Saturday
1-800-986-3460
HOMEDEPOT.COM/HOMEDECORATORS
Retain this manual for future use.
This manual suits for next models
3
Table of contents
Other Home Decorators Collection Telephone Accessories manuals