HOME RETAIL GROUP 842/8976 User manual

Kitchen Trolley with Wine Rack
Dimensions
Width - 65cm
Depth - 35cm
Height - 79cm
Important – Please read these instructions fully before starting assembly
Assembly Instructions- please keep for future reference
Issue 1 - 25/06/12
842/8976
If you need help or have damaged or missing parts, call the Customer Helpline: 0845 640 0800

Safety and Care Advice
Important – Please read these instructions fully before starting assembly
Care and maintenance
• Check you have all the
components and tools listed
below and on pages 1 and 2.
• Remove all ttings from the
plastic bags and separate them
into their groups.
• Keep children and animals
away from the work area, small
parts could choke if swallowed.
• Make sure you have enough
space to layout the parts before
starting.
• Do not stand or put weight on
the product, this could cause
damage.
• Assemble the item as close
to its nal position (in the same
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
unit or your oor.
• Parts of the assembly will be
easier with 2 people.
• We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers.
• Dispose of all packaging
carefully and responsibly.
• Only clean using a damp
cloth and mild detergent, do
not use bleach or abrasive
cleaners.
• From time to time check that
there are no loose screws on
this unit.
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal
centre.

Components - Panels
Please check you have all the panels listed below
1Left side x 1
(72.5(h) x 32(d)cm)
2Right side x 1
(72.5(h) x 32(d)cm)
3Bottom shelf x 1
(53.8(w) x 32(d)cm)
4Middle shelf x 1
(53.8(w) x 32(d)cm)
5Wine rack left upright
x 1
(32.8(h) x 29.8(d)cm)
6Wine rack middle
upright x 1
(32.8(h) x 29.8(d)cm)
7Wine rack bottom
shelf x 1
(23.5(w) x 29.8(d)cm)
8Wine rack top shelf x 1
(23.5(w) x 29.8(d)cm)
9Bottom back panel
x 1
(42(h) x 54.8(w)cm)
10 Top back panel x 1
(22.5(h) x 54.8(w)cm)
11 Drawer front x 1
(8(h) x 53.6(w)cm)
12 Drawer left x 1
(7(h) x 25(d)cm)
13 Drawer right x 1
(7(h) x 25(d)cm)
14 Drawer back x 1
(7(h) x 49(w)cm)
15 Drawer base x 1
(50(w) x 24.8(d)cm)
16 Top x 1
(65(w) x 35(d)cm)
1

Components - Fittings If you have damaged or missing components,
call the Customer Helpline: 0845 640 0800
Please check you have all the ttings listed below
Note: The quantities below are the correct amount to complete the assembly. In some cases more ttings
may be supplied than are required.
A BC
50mmm Hex bolt x 12 Barrel nut x 12 30mm Screw x 14
DEF
Cambolt x 2 Camlock x 2 Wooden dowel x 2
GHI
16mm Bolt x 2 Handle x 1 10mm Screw x 8
JKL
Left drawer runner (case) x 1 Right drawer runner (case) x 1 Left drawer runner (drawer) x 1
MNO
Right drawer runner (drawer) x 1 Castor with brake x 2 Castor x 2
P
Allen key x 1
Tools required
Phillips screwdriver
(medium & large)
Ruler – Use this ruler to help correctly identify the screws
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100 110 115 120 125 130 135 140 145 150 155 160 165 170
105
2

Assembly Instructions
Step 1
Fix 2 x cambolt Dand 2
x wooden dowel Finto
rear of drawer front 11
as shown.
Fix 1 x handle Hto
drawer front 11 using 2 x
16mm bolt Gas shown.
Step 2
Insert 1 x camlock Einto
drawer left 12 and drawer
right 13 as shown.
Step 3
Connect drawer left 12
and drawer right 13 to
drawer front 11 as shown
and tighten camlocks
with a screwdriver.
Step 4
Slide drawer base 15
into slots of left and right
sides as shown.
Step 5
Connect drawer back
14 to left and right sides
using 4 x 30mm screw
Cas shown.
Step 6
Connect left drawer
runner (drawer) Land
right drawer runner
(drawer) Mto underside
of drawer using 4 x 10mm
screw Ias shown.
Note: the wheels of the
drawer runners must point
to the rear of the drawer.
D
F
11
H
G
E
12 13
12
13
11
15
14
C
L
M
I
3

Assembly Instructions
Step 7
Fix left drawer runner
(case) Jto left side
1 and x right drawer
runner (case) Kto right
side 2using 4 x 10mm
screw Ias shown.
Step 8
Slot wine rack middle
upright 6, wine rack
bottom shelf 7and
wine rack top shelf 8
together as shown.
Step 9
Fix wine rack left
upright 5to assembly
completed at Step 8
using 4 x 30mm screw
Cas shown.
Note: the holes in the
edge of wine rack left
upright 5must be at
the bottom.
Step 10
Insert 4 x barrel nut B
into underside of bottom
shelf 3as shown.
Note: ensure that the
holes through the barrel
nuts are aligned with the
screw holes in the edge
of the panel.
1 2
JK
I
6
7
8
Front
5
C
B
3
4

Assembly Instructions
Step 11
Connect bottom shelf 3
to assembly completed
at Step 9 using 4 x
30mm screw Cas
shown.
Step 12
Fix wine rack assembly
completed at Step 11
to right side 2using
2 x 30mm screw Cand
2 x 50mm hex bolt A.
Tighten hex bolts using
allen key provided.
Step 13
Insert 4 x barrel nut B
into underside of middle
shelf 4as shown.
Note: ensure that the
holes through the barrel
nuts are aligned with the
screw holes in the edge
of the panel.
3
C
2
C
A
B
4
5

Assembly Instructions
Step 14
Insert 4 x barrel nut B
into underside of top 16
as shown.
Note: ensure that the
holes through the barrel
nuts are aligned with the
screw holes in the edge
of the panel.
Step 15
Connect middle shelf 4
to right side 2using 2
x 50mm hex bolt Aas
shown.
Connect top 16 to right
side 2using 2 x 50mm
hex bolt Aas shown.
B
16
4
A
2
16
6

Assembly Instructions
Step 16
Slide bottom back panel
9and top back panel
10 into slots of shelves
as shown.
Step 17
Connect left side 1to
exposed ends of shelves
and top using 6 x 50mm
hex bolt Aas shown.
9
10
1
A
7

Assembly Instructions
Step 18
Place drawer completed
at Step 6 onto its
runners.
Step 10
Warning!
The unit is
heavy. Ask
someone to
help you with
this step.
Insert 2 x castor with
brake Nand 2 x castor
Ointo bottoms of legs
as shown.
N
N
O
O
8

9

If you need help or have damaged or missing parts, call the Customer Helpline: 0845 640 0800
Home Retail Group, 489-499 Avebury Boulevard, Saxon Gate West, Central Milton Keynes, Bucks, MK9 2NW