HOME RETAIL GROUP Hygena 453/7414D User manual

Hygena Cubic Wood Glass TV Unit
Dimensions
Width - 120cm
Depth - 40cm
Height - 45.3cm
Issue 1 - 16/09/15
Important –Please read these instructions fully before starting assembly
If you need help or have damaged or missing parts, call the Customer Helpline: 03456 400800
Assembly Instructions- Please keep for future reference 453/7414D

1
Note: if require the next
page can be cut out and used
as reference throughout the
assembly. Keep this page with
these instructions for future
reference.
• Remove all fittings from the
plastic bags and separate them
into their groups.
Safety and Care Advice
Important– Please read these instructions fully before starting assembly
• Check you have all the
components and tools listed on
pages 2 & 3.
• Keep children and animals
• Make sure you have enough
space to layout the parts before
starting.
away from the work area, small
parts could choke if swallowed.
• Do not stand or put weight on
the product, this could cause
damage.
• Assemble the item as close
to its final position (in the same
room) as possible.
• Assemble on a soft level
surface to avoid damaging the
unit or your floor.
• Parts of the assembly will be
easier with 2 people.
• We do not
recommend the
use of power
drill/drivers for
inserting screws,
as this could damage the unit.
Only use hand screwdrivers.
• Dispose of all packaging
carefully and responsibly.
• • •
•
•
• Only clean using a damp cloth
and mild detergent, do no use
bleach or abrasive cleaners.
• From time to time check that
there are no loose screws on
this unit.
• This product should not be
discarded with household
waste. Take to your local
authority waste disposal centre.
Care and maintenance
Glass safety– Take care when handling glass, please follow the advice below
If a glass component is
chipped or broken replace with
glass of the type described on
this instructions. Consult the
manufacturer, retailer or agent
with regard to obtaining a
manufacturing specification and
shape for replacement glass
quoting the model number, and
batch or date of manufacture.
Do not place very hot or
cold items against or in close
proximity to the glass
surfaces unless adequately
thick insulating material is
used to prevent such items
coming into contact with the
glass.
Do not strike the glass with
hard or pointed items.
When cleaning glass panels
or mirrors use a damp cloth or
leather with washing up liquid or
soft soap if necessary.
Do not use washing powders
or any other substances
containing abrasives since these
substances scratch glass.

2
Components- Panels
Please check you have all the panels listed below
Top panel
(1200 x 400 mm)
Left side frame
(398 x 435 mm) (398 x 435mm)
123Right side panel
Front top rail
(1078 x 60mm)
Rear rail
(539 x 60mm) (380 x 435mm)
456Divider
Bottom panel
(509 x 364mm)
Rear panel
(509 x 435mm) (508 x 359mm)
7
Front bottom rail
(539 x 60mm)
10 Door
(534 x 310mm)
11 Glass shelf x 2
(533 x 380mm)
12
89Adjustable shelf

3
Note: The quantities below are the correct amount to complete the assembly. In some cases more
fittings may be supplied than are required.
Components- FittingsIf you have damaged or missing components,
call the Customer Helpline: 03456 400800
Please check you have all the fittings listed below
12mm Screw
x
10
A
B C
14 mm Screw x 8
Hinge x 2
D
E
Metal cam x 25
F
Shelf pin
x
4
Ruler- Use this ruler to help correctly identifythescrews
0 5 10 15 20 25 30 35 40 45 50 55 60 65 70 75 80 85 90 95 100
110 115 120 125 130 135 140 145 150 155 160 165 170
105
Metal dowel
x
25
G
H I
J
Tools required
Phillips screwdriver
(medium & small)
Flatblade screwdriver
Cover pad x 25
Handle
Wood dowel x 30
Shelf holder x 8
K
L
Large foot pad x 4 Small foot pad x 2

4
Assembly Instructions
Step 1
Step 2
8
8
7
C
A
A
Insert Wood dowels
into the indicated holes.
Screw 1 Metal dowel
into the threaded hole
in the Rear panel
as shown.
8
A
C
Firmly push Bottom
panel onto the
dowels , ensuring the
Metal dowels and
wood dowels enter
corresponding holes.
C
A
7

5
Assembly Instructions
Step 3
Step 4
D
D
Note: Longer leg of
the cross on the
Metal Cam must
faces towards
metal dowel.
8
8
3
3
7
7
C
A
Insert the 1 Metal cam
into the hole on the
Bottom panel so
that they are flush.
Note: Longer
leg of the cross
on the Metal
Cam must faces towards
metal dowel (as shown).
Then, using a Philips
Screwdriver, screw the
Metal cam clockwise
until it is ‘hand tight’.
7
D
D
Screw 4 Metal dowels
into the threaded holes
in the Right side panel
as shown.
3
Insert Wood dowels
into the indicated holes.
A
C
Firmly push the Rear and
Bottom panel piece from
Step 3 onto the dowels,
ensuring the Metal
dowels and wood
dowels enter
corresponding holes.
C
A

6
Assembly Instructions
Step 5
Step 6
D
D
D
D
8
8
6
6
3
7
7
C
C
A
A
Turn over.
Insert the 4 Metal cams
into the 4 holes on
the panels so that
they are flush.
Note: Longer
leg of the cross
on the Metal
Cams must face towards
end of panels.
Then, using a Philips
Screwdriver, screw all
Metal cams
clockwise until they are
‘hand tight’.
7 8
D
D
Screw 4 Metal dowels
into the threaded holes
in the Divider as
shown.
6
Insert Wood dowels
into the indicated holes.
A
C
Firmly push the Divider
onto the edges of Rear
and Bottom panels,
ensuring the Metal
dowels and wood
dowels enter
corresponding holes.
C
A

D
D
Note: Longer leg of
the cross on the
Metal Cams must
face towards end
of panel.
7
Assembly Instructions
Step 7
Step 8
8
6
6
6
5
5
7
7
7
C
A
Insert Wood dowel
into the indicated hole.
Screw 1 Metal dowel
into the threaded hole
in the Divider as
shown.
6
A
C
Firmly push Rear rail
onto the dowels ,
ensuring the Metal dowel
and wood dowel
enter corresponding
holes.
CA
Insert the 4 Metal cams
into the 4 holes on
the panels so that
they are flush.
Note: Longer
leg of the cross
on the Metal
Cams must face towards
end of panels.
Then, using a Philips
Screwdriver, screw all
Metal cams
clockwise until they are
‘hand tight’.
7 8
D
D

D
8
6
6
5
4
4
7
7
3
10
10
C
A
Taped edge.
Insert the 1 Metal cam
into the hole on the
Rear rail so that they
are flush.
Note: Longer
leg of the cross
on the Metal
Cam must faces towards
metal dowel (as shown).
Then, using a Philips
Screwdriver, screw the
Metal cam clockwise
until it is ‘hand tight’.
5
D
D
Assembly Instructions
Step 9
Step 10
Screw 5 Metal dowels
into the threaded holes
in the Front top and
bottom rails as
shown.
4 10
Insert Wood dowels
into the indicated holes.
A
C
Firmly push the Front top
and bottom rails onto
the top edges of side
panel and divider,
ensuring the Metal
dowels and wood
dowels enter
corresponding holes.
C
A

D
D
9
Assembly Instructions
Step 11
Step 12
6
5
4
7
3
2
2
CA
D
D
D
Insert the 5 Metal cams
into the 5 holes on
the panels so
that they are flush.
Note: Longer
leg of the cross
on the Metal
Cams must face towards
end of panels.
Then, using a Philips
Screwdriver, screw all
Metal cams
clockwise until they are
‘hand tight’.
3 6 7
D
D
Screw 2 Metal dowels
into the threaded holes
in the Left side frame
as shown.
2
Insert Wood dowels
into the indicated holes.
A
C
Firmly push the Left side
frame onto the ends of
Front and Rear rails,
ensuring the Metal
dowels and wood
dowels enter
corresponding holes.
C
A

D
D
10
Assembly Instructions
Step 13
Step 14
CA
5
4
2
1
1
Insert the 2 Metal cams
into the 2 holes on
the Front and rear rails so
that they are flush.
Note: Longer
leg of the cross
on the Metal
Cams must face towards
end of rails.
Then, using a Philips
Screwdriver, screw all
Metal cams
clockwise until they are
‘hand tight’.
D
D
1
Screw 8 Metal dowels
into the threaded holes
in the Top panel as
shown.
1
Insert Wood dowels
into the indicated holes.
A
C
Firmly push the Top
panel onto the end
of side panels and
dividers, ensuring the
Metal dowels and
wood dowels enter
corresponding holes.
C
A

D
11
Assembly Instructions
Step 15
Step 16
E
B
12
D
D
D
K
L
Insert the 8 Metal cams
into the 8 holes on
the side panels, dividers
and rear rail so that they
are flush.
Note: Longer
leg of the cross
on the Metal
Cams must face towards
metal dowels.
Then, using a Philips
Screwdriver, screw all
Metal cams
clockwise until they are
‘hand tight’.
D
D
Screw 8 Shelf holders
onto the pre-drilled holes
in divider and Left side
frame using 12mm
Screws , make sure
the screws of the shelf
holders face downwards
as shown.
E
B
L
Push the top Glass shelf
into the Shelf
holders and secure
with the screws by
turning clockwise as
shown.
12
E
Repeat this step to
assemble the other glass
shelf.
Peel off the cover of the
Foot pads , attach
to the bottom edges of
side panels and divider
as shown.
Turn the unit upright.
K
D

12
Assembly Instructions
Step 17
Step 18
11
B
F
H
J
FH
Front
Screw Handle to the
pre-drilled holes in the
rear face of the Door
using 12mm Screws .
Screw Hinges to the
pre-drilled holes in the
rear face of the Door
using 14mm Screws .
11
B
J
F
H
Locate the Door
onto the Right side
panel , screw
the Hinges to the
pre-drilled holes, using
14mm Screws as
shown.
3
14
F
H

Push 2 Shelf Pins
into each side of the
Right side panel and
divider at desired
height.
Place Adjustable shelf
onto the Shelf
pins.
13
If you need help or have damaged or missing parts, call the Customer Help Line: 03456 400800
Home Retail Group plc. Avebury, 489-499 Avebury Boulevard. Milton Keynes. MK9 2NW
Assembly Instructions
Assembly is complete.
Adjust the door:
Step 19
a: To move doors in
or out: loosen screw
shown and move doors
to suit.
Re-tighten screws.
b: To move doors left
or right: loosen screw
shown and move doors
to suit.
Re-tighten screws.
Step 20
I
9
9
I
Cover the visible
cam holes with Cover
pads .
G