Home Skinovations Silk'n BellaFlash Pro User manual

EN
1
Copyright 2017 © Home Skinovations Ltd.
All rights reserved.
Legal Notice
Home Skinovations Ltd reserves the right to make changes to its
products or specications to improve performance, reliability, or
manufacturability. Information furnished by Home Skinovations Ltd is
believed to be accurate and reliable at the time of publication. However,
Home Skinovations Ltd assumes no responsibility for its use. No license
is granted by its implication or otherwise under any patent or patent
rights of Home Skinovations Ltd.
No part of this document may be reproduced or transmitted in any form
or by any means, electronic or mechanical, for any purpose, without the
express written permission of Home Skinovations Ltd. Data is subject to
change without notication.
Home Skinovations Ltd has patents and pending patent applications,
trademarks, copyrights, or other intellectual property rights covering
subject matter in this document. The furnishing of this document does
not give you any license to these patents, trademarks, copyrights, or
other intellectual property rights except as expressly provided in any
written agreement from Home Skinovations Ltd. Specications are
subject to change without notice.
SILK'N and the SILK'N logo are registered trademarks of Home
Skinovations Ltd, Tavor Building, Shaar Yokneam POB 533, Yokneam
2069206, ISRAEL www.silkn.com, [e-mail].
Flash&Go Pro BellaFlash Pro UM NA 2102B inside ED131-01.indd 1 20/03/2017 11:52:23

EN
2
Table of contents
1. Get to know your Silk'n BellaFlash Pro............................ 3
2. Safety with Silk'n BellaFlash Pro ..................................... 4
3. Contraindications & warnings ......................................... 4
4. Do not use Silk'n BellaFlash Pro if: .................................. 7
5. Consult your physician before use if you have:.............. 7
6. Safety tips.......................................................................... 8
7. Possible side eects.......................................................... 9
8. Long-term hair removal the Silk'n way ......................... 11
9. Get started....................................................................... 15
10. After treatment ............................................................... 17
11. Maintenance.................................................................... 17
12. Troubleshooting ............................................................. 18
13. Customer service............................................................. 18
14. Warranty.......................................................................... 18
15. Disposal ........................................................................... 19
16. Specications .................................................................. 19
17. Signs and symbols .......................................................... 21
18. Declaration...................................................................... 68
19. Labeling........................................................................... 72
Flash&Go Pro BellaFlash Pro UM NA 2102B inside ED131-01.indd 2 20/03/2017 11:52:23

EN
3
1. Get to know your Silk'n BellaFlash Pro
Silk'n BellaFlash Pro is a light-based device for permanent hair reduction
designed for home-use. It is a powerful electrical device and should be used
with special attention to safety. Be sure to read all warnings, contraindications
and safety precautions before use, and follow them strictly. We recommend
you re-familiarize yourself with the instructions before each treatment.
1.1 Package contents
Your Silk'n BellaFlash Pro package includes:
yHair removal device yCleaning cloth
yUser manual yAdapter with cable
yStorage case yWarranty card
1.2 Device description
Refer to the diagram at the front of this manual to see the location of each
feature of your Silk'n BellaFlash Pro.
1. Energy level indicator lights (1-5)
2. Skin color sensor light
3. Ready light
4. Control button
5. Skin color sensor
6. Treatment surface
7. Adapter socket
1.3 Intended use
Silk'n BellaFlash Pro is intended to remove unwanted hair and eect long-term,
or permanent hair reduction. Permanent hair reduction is dened as a
long-term stable reduction in the number of hairs re-growing after a treatment
regime. You may use Silk'n BellaFlash Pro to remove unwanted body hair.
Ideal body areas include the underarms, bikini line, arms, legs, face (below the
cheekbones), back, shoulders and chest.
Do not use this device for any purpose other than as described in this manual.
Flash&Go Pro BellaFlash Pro UM NA 2102B inside ED131-01.indd 3 20/03/2017 11:52:23

EN
4
2. Safety with Silk'n BellaFlash Pro
With Silk'n BellaFlashPro,safety comes rst
Home Pulsed Light (HPL) technology in Silk'n BellaFlash Pro provides superior
safety with lower energy levels. HPL achieves long-term hair removal results at
a fraction of the energy level used in other light-based hair removal equipment.
The low energy reduces the risk of harm or complications, and contributes to
your overall safety.
Silk'n BellaFlash Pro has additional features to protect your:
UEyes: Light pulses are only active when the treatment surface is
in full contact with the skin.
USkin: Your skin is never in direct contact with the optical lens
through which light pulses are emitted.
3. Contraindications & warnings
Silk'n BellaFlash Pro is not designed for everyone.
Hair removal by lasers or intense pulsed light sources can
cause increased hair growth in some individuals. Based
upon currently available data, the highest risk groups for
this response are females of Mediterranean, Middle Eastern
and South Asian heritage when used on the face and neck.
For more information visit www.silkn.com, or your local
Silk'n domain.
E
This device must not be used by the following people:
children, adults with limited physical, sensory or
psychological capacities, or those lacking experience or
knowledge in how to use the device. Children should
be supervised to ensure that they do not play with the
device.
Flash&Go Pro BellaFlash Pro UM NA 2102B inside ED131-01.indd 4 20/03/2017 11:52:23

EN
5
K
Do not expose treated areas to the sun, and do not
use energy levels 2-5 on tanned skin or after recent sun
exposure (including articial tanning machines). Refer
to section "6.1 Exposure to the sun".
E
Use below the cheekbones and not around the eyes.
E
Do not use on areas with injected lls or toxins.
E
Do not treat on tattoos or permanent makeup, dark
brown or black spots, (such as large freckles, moles, or
warts), nipples, genitals, around the anus, or lips.
E
Do not treat on active eczema, psoriasis, lesions, open
wounds or infections (cold sores), abnormal skin
conditions caused by systemic or metabolic diseases
(diabetes for example).
E
Abnormal skinconditions caused bydiabetes,systemic
or other metabolic diseases.
E
Do not treat on an area that has a history of herpes
outbreaks.
E
Do not use if you are pregnant or nursing.
E
Do not treat on areas where you may want hair to
grow. The results are permanent.
E
Do not treat the same area of skin more than once per
hair removal session.
E
Stop use immediately if your skin is very red, or if your
skin blisters or burns.
Flash&Go Pro BellaFlash Pro UM NA 2102B inside ED131-01.indd 5 20/03/2017 11:52:23

EN
6
E
Use a lower energy level if you experience any
discomfort.
E
Never use ammable liquids such as alcohol (including
perfumes, sanitizers, or other applications containing
alcohol) or acetone to clean the skin before use.
A
Keep your device away from water or liquids! Do not
use near bathtubs, showers, basins or other vessels
containing water. Do not place or store the device
where it can fall, be pushed or placed anywhere
near water. There is a risk of electrocution. Unplug
immediately if the device comes into contact with any
uids, and contact Customer Service.
E
Remove all jewelry before use.
E
Never leave the device unattended when plugged
into an outlet. Keep the AC/DC adapter accessible at all
times, so it can be removed from the socket easily in
case of emergency.
E
Do not attempt to modify, open or repair your Silk'n
BellaFlash Pro device. You may expose yourself to
dangerous electrical components or pulsed light
energy. You may cause serious harm to yourself, and
you will void your warranty.
Flash&Go Pro BellaFlash Pro UM NA 2102B inside ED131-01.indd 6 20/03/2017 11:52:23

EN
7
4. Do not use Silk'n BellaFlash Pro if:
UThe adapter, attachments or accessories for this device are not
recommended by Home Skinovations Ltd.
UThe device has a damaged cord or adapter. Keep the power
cord away from heated surfaces.
UYou see or smell smoke when it is in use.
UThe skin color sensor, treatment surface, or device casing is
cracked or coming apart.
UThe device is not working or appears to be damaged in any
other way.
In such cases, contact Silk'n Customer Service.
5. Consult your physician before use if you have:
UA history of kelodial scar formation.
UUsed medication that makes the skin more sensitive to
light, including non-steroidal anti-inammatory agents,
(e.g., aspirins, ibuprofens, acetaminophen), tetracyclines,
phenothiazines, thiazide, diuretics, sulfonyluraes, sulfonamides,
DTIC, uorouracil, vinblastine, griseofulvin, Alpha-Hydroxi Acids
(AHAs), Beta-Hydroxi Acids (BHAs), Retin-A®, Accutane® and/or
topical retinoids.
UBeen treated, or receiving current treatment, with Alpha-
Hydroxi Acids (AHAs), Beta-Hydroxi Acids (BHAs), Retin-A®,
topical retinoids or azelaic acid.
UBeen treated with Accutane® (isotretinoin) within the past 6
months.
UEpilepsy.
UA disease related to photosensitivity, such as porphyria,
polymorphic light eruption, solar urticaria, lupus, etc.
Flash&Go Pro BellaFlash Pro UM NA 2102B inside ED131-01.indd 7 20/03/2017 11:52:23

EN
8
UA history of skin cancer or areas of potential skin malignancies.
UReceived radiation therapy or chemotherapy treatments within
the past 3 months, or have areas of potential skin malignancies.
UAn active implant, such as a pacemaker, incontinence device,
insulin pump, etc.
UUsed physician-prescribed drugs on your skin within the past 6
months.
UAny other condition which, in the opinion of your physician or
dermatologist, would make it unsafe for you to be treated.
6. Safety tips
This section has information to help you use your device safely.
6.1 Exposure to the sun
UThe lowest energy level (1) is designed for safe use even after
sun exposure.
UIf you use energy levels 2-5, avoid further exposure to the sun
for 4 weeks before and 2 weeks after your treatment. This is
because higher quantities of melanin expose the skin to greater
risk when using any method of light-based hair removal. This
applies to all skin types, even those that don't seem to tan
quickly.
UWe don't advise it, but if you have to go out in the sun after a
treatment, be sure to apply sunscreen SPF30 or higher to the
treated area. Do this for 2 weeks after a treatment.
6.2 Exposure of pulse light to the eyes
UAlthough you can use the device to treat facial hair, take extra
care to avoid contact with the eyes, and use only below the
cheekbones.
6.3 Wounds or infections
UWait for the aected area to heal before further use.
Flash&Go Pro BellaFlash Pro UM NA 2102B inside ED131-01.indd 8 20/03/2017 11:52:23

EN
9
7. Possible side eects
If you follow the instructions fully and pay attention to all warnings and
contraindications, complications and side eects are uncommon. However
every cosmetic procedure, including those designed for home use, involves
some degree of risk. Therefore, it is important that you understand and accept
the risks and complications that may occur with pulsed light hair removal
systems designed for home use.
Minor skin discomfort
Home pulsed light hair removal is generally well-tolerated. However, some
users feel mild discomfort during use. This is best described as a mild stinging
sensation on the treated skin areas. The stinging sensation may last during or
after treatment.
This means that you should use Silk'n BellaFlash Pro at a lower energy level,
and if that doesn't help, you should stop using the device.
Skin redness
Your skin may become red immediately after using the device or within 24
hours. Redness generally clears up within 24 hours.
See your doctor if redness does not go away within 2 to 3 days.
Make sure you use the energy level that is comfortable for you and suitable
for your skin color. Refer to section "9.1 Before your rst treatment".
Increased sensitivity of the skin
The skin of the treated area is more sensitive so you may encounter dryness
or aking of the skin.
Excessive redness and swelling
In rare cases, treated skin may become very red and swollen. This is more
common in sensitive areas of the body. The redness and swelling should
subside within 2 to 7 days and should be treated with frequent applications of
ice. Gentle cleansing is OK, but avoid exposure to the sun.
Flash&Go Pro BellaFlash Pro UM NA 2102B inside ED131-01.indd 9 20/03/2017 11:52:23

EN
10
Blisters or burns
Cool the aected area and apply anti-burn cream. Wait until the area has
healed completely before another treatment, and use a lower energy level.
If the skin does not return to normal within 3 days, consult your
physician.
Scarring
Although very rare, scarring may occur. Usually when scarring occurs, it is in
the form of a at and white lesion on the skin (hypotrophic). However, it can
be large and red (hypertrophic) or large and extend beyond the margins of
the injury itself (keloid). Subsequent aesthetic treatments may be required to
improve the appearance of the scar.
Pigment changes
Silk'n BellaFlash Pro targets the hair shaft, in particular the pigmented cells
in the hair follicle and the hair follicle itself. Nevertheless, there is a risk of
temporary hyper-pigmentation (increased pigment or brown discoloration) or
hypo-pigmentation (whitening) to the surrounding skin. This risk of changes
in skin pigmentation is higher for people with darker skin tones.
Usually discoloration or changes to skin pigment are temporary and
hyperpigmentation or hypo-pigmentation rarely occur.
Infection
Infection of the skin is exceedingly rare but is still a possible risk following a
skin burn or wound caused when using Silk'n BellaFlash Pro .
Bruising
Very rarely, treatment may cause blue-purple bruising that can last 5 to 10
days. As the bruising fades, there may be a rust-brown discoloration of the
skin (hyper-pigmentation).
Flash&Go Pro BellaFlash Pro UM NA 2102B inside ED131-01.indd 10 20/03/2017 11:52:23

EN
11
8. Long-term hair removal the Silk'n way
The eciency of hair removal varies from person to person according to body
area, hair color, and how Silk'n BellaFlash Pro is used. A typical full hair growth
cycle may take 18-24 months. During this time, multiple treatment sessions are
required to achieve permanent hair removal.
A typical Silk'n BellaFlash Pro hair removal plan during a full hair growth cycle
includes:
UTreatments 1-4: Plan two weeks apart.
UTreatments 5-7: Plan four weeks apart.
UTreatments 8+: Treat as needed, until desired results are
achieved.
8.1 Expected treatment outcomes
Individual response depends on hair type as well as biological factors that may
aect hair growth patterns. Some users may respond quicker or slower than
the average number of treatments.
Skin
Type1
Body
Hair2
Light
Fluence
[J/cm2]
Part of the
Body
Average
Treatment
Time
Eectiveness
of Hair
Removal
1-5
Dark
blonde to
brown
2.5-4
Lower or
upper legs 60%
Arms Session 10-
12, approx.
4 weeks
apart.
50%
Bikini line 60%
Underarms 55%
Flash&Go Pro BellaFlash Pro UM NA 2102B inside ED131-01.indd 11 20/03/2017 11:52:23

EN
12
Skin
Type1
Body
Hair2
Light
Fluence
[J/cm2]
Part of the
Body
Average
Treatment
Time
Eectiveness
of Hair
Removal
1-5 Brown to
black 2.5-4
Lower or
upper legs Sessions
8-10
approx.
4 weeks
apart.
70%
Arms 60%
Bikini line 70%
Underarms 65%
1Skin types are based on the Fitzpatrick scale of skin colors. Refer to the skin
color chart in the diagram at the front of the manual.
2Not eective on white body hair.
8.2 Energy levels
The energy level determines the intensity of the light pulse delivered to your
skin. As the energy level increases, so do hair removal results, as well as the risk
of possible side eects and complications.
UThe device has 5 levels of energy from 1 (the lowest) to 5 (the
highest), represented by 5 energy level indicator lights.
UWhen the device is turned on, the energy level is set to level 1
automatically. Only one energy level indicator light will be on.
UTo change the energy level, press the control button repeatedly
to increase the energy level from 1 to 5. Once at level 5, press
the control button again to reduce the energy level from 5 back
to 1.
M
To determine the right energy level for your treatment area,
refer to section"9.1 Before your rst treatment".
Flash&Go Pro BellaFlash Pro UM NA 2102B inside ED131-01.indd 12 20/03/2017 11:52:23

EN
13
8.3 Pulsing and gliding
Pulsing is the best technique for working at higher energy levels.
UPress the treatment surface against your skin. Work in rows
(either across or down as shown in the image). Start at one end
of each row and progress to the other end.
UThe treatment surface creates temporary pressure marks on the
treated area so you can see areas you have treated.
UAfter each pulse, move the treatment surface to the next spot.
Keep doing this pulsing action for the area you are treating.
UAvoid gaps or overlaps as you use the device.
Gliding is the best technique for working at lower energy levels.
UPress the treatment surface rmly against your skin and slowly
glide over your skin (either across or down as shown in the
image). Make sure that the treatment surface is always touching
your skin.
UAt lower energy levels, the device takes only 1-1.5 seconds to
recharge between pulses. This generates a nonstop sequence
of ashes.
UGlide at a speed so that you avoid gaps or overlaps.
EDo not treat the same area of skin more than once per hair
removal session.
EStop use immediately if you have any discomfort.
Silk’n
Flash&Go Pro BellaFlash Pro UM NA 2102B inside ED131-01.indd 13 20/03/2017 11:52:23

EN
14
8.4 Device sensors
Your Silk'n BellaFlash Pro has three sensors. for touch, movement, and color.
UTouch and Movement: The device will only emit repeated
pulses when it is in rm contact with your skin, and you keep
moving it across your skin.
UColor: Light-based hair removal on darker skin tones may
result in adverse eects such as burns, blisters, and skin color
changes (hyper- or hypo-pigmentation). Your Silk'n BellaFlash
Pro has a skin color sensor that detects the color of your skin
automatically. The skin color sensor checks your skin color at the
start of, and occasionally during, each treatment.
M
If Silk'n BellaFlash Pro detects that your skin tone is dark, and the
energy level is set to 3 or higher, the device will auto-adjust and
set the energy level back to 2.
8.5 What to expect when treating with Silk'n
For many people, using Silk'n BellaFlash Pro may be their rst experience with a
light-based device. During a treatment session it is normal to experience or feel:
UNoise: The cooling fan makes noise similar to a hair dryer. This
is normal.
UA popping sound: With each ash of HPL™ light.
UA sensation of warmth and tingling: During each light
pulse.
USome redness: It is not uncommon to see some very mild,
pink-like skin coloration during or just after a treatment. This is
usually most noticeable around the hairs themselves.
EStop use immediately if you see your skin is very red.
EContact your physician immediately, if you experience any
complication.
Flash&Go Pro BellaFlash Pro UM NA 2102B inside ED131-01.indd 14 20/03/2017 11:52:23

EN
15
9. Get started
To get started:
1. Remove the device and other components from box.
2. Plug the adapter cord into the device socket and plug the adapter into
an electrical outlet. All energy level indicator lights will turn on, and then
go o.
9.1 Before your rst treatment
ERemove all jewelry before use.
You must decide which energy level is right for your skin and the area you want
to treat.The device has 5 levels of energy from 1 (the lowest) to 5 (the highest).
For example, you might treat one area at energy level 1, and another at level 4.
For information on energy levels, refer to section "8.2 Energy levels".
Spot Test
To choose the right energy level, test each treatment area separately (refer to
the skin color chart at the front of this manual).
1. Press the control button to turn on the device. The level 1 energy level
indicator light will go on.
2. Place the treatment surface on your skin to deliver one pulse. If you
did not experience abnormal discomfort after 24 hours, increase the
energy level on your next test spot.To increase the energy level, remove
the device from your skin and press the control button again. This will
increase the energy level.
3. Deliver one pulse on a dierent spot at energy level 2. Use the energy
levels indicated on the skin color chart. Wait 24 hours. If there are no
adverse eects, use a dierent test spot and continue testing at
increased energy levels to nd the highest level that is comfortable for
you, without adverse eects.
4. When you nd the highest energy level that is most comfortable for
that treatment area, you can start your treatment.
Flash&Go Pro BellaFlash Pro UM NA 2102B inside ED131-01.indd 15 20/03/2017 11:52:23

EN
16
EUse a lower energy level if you experience any discomfort.
Be sure to do a spot test for each part of the body you wish
to treat.
9.2 Treatments with Silk'n BellaFlash Pro
Follow these steps each time you treat an area.
1. Before treating an area, the skin should be shaved, clean, dry and free
of any powders, antiperspirants or deodorants. Do not wax, pluck or
tweeze the hair out.
MBe sure to cover up moles, warts or other marks on the skin
that should not be treated.
2. Press the control button. The device will turn on, the level 1 energy
indicator light will be on, and a fan sound will start.
3. Approximately 1 second after pressing the controlbutton, the readylight
will turn on. The device is then ready to use at the lowest energy level.
4. Set the energy level. Press the control button repeatedly to increase
the energy level until you have the level you want. The energy level
indicator lights indicate the energy level setting (refer to section "8.2
Energy levels").
5. Decide if you wish to treat the area by Gliding or Pulsing (refer to section
"8.3 Pulsing and gliding").
6. Apply the treatmentsurfaceto the skin. Make sure that the skin is spread
evenly and smoothly. When the treatment surface is in full contact with
the skin, the ready light will start blinking slowly.
7. The device will rst determine the color of your skin automatically, and
it will ash a pulse of light onto your skin.You will feel a mild sensation of
warmth and tingling, and you may hear a popping sound.
8. If you are pulsing, remove the device from your skin. The device
will immediately recharge for the next pulse. After a few seconds
(depending on the energy level) the ready light will turn on again, and
start blinking slowly when pressed against the skin.
Flash&Go Pro BellaFlash Pro UM NA 2102B inside ED131-01.indd 16 20/03/2017 11:52:23

EN
17
9. If you are pulsing, repeat the process. If you are gliding, simply continue.
Continue to pulse or glide until you have treated the area fully.
EStop use immediately, if your skin blisters or burns.
10. After treatment
When you have nished your treatment session:
1. Turn the device o by giving the control button an extended press.
Remember the last energy level setting you used, because it will not be
restored when you turn the device on again.
2. Remove the adapter from the electrical outlet.
11. Maintenance
It is important to clean your Silk'n BellaFlash Pro device after each treatment.To
clean the device:
LUnplug the device.
LTo clean the device including the treatment surface, wipe with
a clean, dry cloth. Never use acetone or other abrasive uids,
because they will damage your device.
LAfter cleaning, we recommend you store the device in its
original box.
ENever immerse your Silk'n BellaFlash Pro or any of its parts
in water.
Flash&Go Pro BellaFlash Pro UM NA 2102B inside ED131-01.indd 17 20/03/2017 11:52:23

EN
18
12. Troubleshooting
Do not attempt to open or repair your device . You may expose yourself to
dangerous electrical components or pulsed light energy and may cause
serious harm to yourself. It will also void your warranty.
Problem Checks
My device does not
start.
Make sure the adapter is properly connected to the
device and that it is plugged into an electrical outlet
on the wall.
There is no light pulse
when the device
touches my skin.
Check that the device is connected and the ready
light is on. Make sure that the treatment surface is
evenly and rmly pressed to the skin and that you
are moving the device across your skin.
One or more lights
blink. The device has malfunctioned.
The device has stopped
working and is in
standby mode.
Press the control button again to start the device.
For problems or queries, please contact Silk'n Customer Service.
13. Customer service
For more information about this or other Silk'n products, visit our website:
www.silkn.com. This manual is also available as a PDF download from:
www.silkn.com/manuals.
Report unexpected operations or events, or any other problem with
your device to Customer Service. Contact us on our toll free number:
1-877-367-4556.
14. Warranty
Refer to your Silk'n warranty card.
Flash&Go Pro BellaFlash Pro UM NA 2102B inside ED131-01.indd 18 20/03/2017 11:52:23

EN
19
15. Disposal
N
Help protect the environment. Do not dispose with household waste
and be sure to follow your country's laws for the disposal of electrical
items.
16. Specications
Model no. H3220
Spot size 0.9cm x 3cm [2.7cm²]
Technology Home Pulsed Light
Maximum energy level Max 4J/cm²
Wavelength 475-1200nm
Operation & safety Skin color sensor ensures use on
appropriate skin types.
Pulse duration 500-800 micro seconds
Pulse interval 0.9 sec minimum
Repetition rate 1.1 Hz maximum
Package size 220x220x135 mm
System weight 275 gm
Transport & storage between uses
and storage condition
Temperature: minus 40° - 70°C
Relative humidity : 10% - 90%
Atmospheric pressure: 500 - 1060 hPa
Operating conditions
Temperature: 10° - 35°C
Relative humidity: 30% - 75%
Atmospheric pressure: 700 - 1060 hPa
Flash&Go Pro BellaFlash Pro UM NA 2102B inside ED131-01.indd 19 20/03/2017 11:52:23

EN
20
Time from minimum storage
temperature between uses to
minimum operating temperature
with ambient temperature of 20°C
degrees
30 minutes
Time from maximum storage
temperature between uses to
maximum operating temperature
with ambient temperature of 20°C
degrees
30 minutes
Mode of operation Continuous
Protection against electrical shock Class II Medical equipment type BF
applied part
Adapter models and rating
KSAPV0361200300D5
PMA36R-120
Input: 100-240VAC, 50-60 Hz, 0.9A.
Output: 12V, 3.0A
The device was tested and complies
with
IEC 60601-1 (Safety)
IEC 60601-1-2 (EMC)
IEC 60601-1-11 (Environment)
IEC60601-2-57 (Safety of non-laser
source)
Expected service life of the
equipment 5 years
Flash&Go Pro BellaFlash Pro UM NA 2102B inside ED131-01.indd 20 20/03/2017 11:52:24