Home Styles 20 04420 0095 User manual

Part List
20 04420 0095
IMPORTANT
Carefully remove all the parts from the carton and
place them individually on a soft cloth to prevent
scratches or other damage.
Carefully and strictly follow these assembly instructions
to ensure a completed product as designed.
Do not use power tools above 8 volts to assemble.
Kitchen Cart
Refer to later page(s) of these
instructions for drawer assembly.
D.
Middle Panel
1 pc.
E.
Post
1 pc.
F.
Post
1 pc.
S.
Drawer
2 pcs.
Q.
Shelf
2 pcs.
Home Styles Customer Service: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Tool(s) required for assembly: Phillips screwdriver
A.
Top
1 pc.
B.
Side Frame
1 pc.
C.
Side Panel
1 pc.
J.
Rail
1 pc.
K.
Rail
1 pc.
M.
Back Rail
1 pc.
N.
Back Rail
1 pc.
L.
Back Rail
1 pc.
P.
Back Panel
1 pc.
O.
Base
1 pc.
R.
Drawer
1 pc.
H.
Support
1 pc.
I.
Support
1 pc.
G.
Support
1 pc.

Hardware List
M6x25
Head Cap Bolt
4 pcs. (+1 extra)
Cam Lock
45 pcs. (+4 extra)
Cam Lock Screw
44 pcs. (+4 extra)
Cam Lock Screw (long)
1 pc. (+1 extra)
Insert
1 pc. (+1 extra)
Insert Cover
3 pcs. (+1 extra)
Cover
37 pcs. (+4 extra)
Dowel
48 pcs. (+1 extra)
M3.5x12
Wood Screw
12 pcs. (+1 extra)
M7x50
ScrewAssembly
10 pcs. (+1 extra)
Left Runner
3 pcs.
M4x16
Caster Screw
16 pcs. (+1 extra)
Locking
Caster
2 pcs.
Non-Locking
Caster
2 pcs.
Left Guide
3 pcs.
Side Bar
2 pcs.
Adjustable Pin
8 pcs. (+1 extra)
M4x12
Machine Screw
4 pcs.
M4x22
Machine Screw (long)
4 pcs.
M3.5x50
Flat Head Screw
16 pcs. (+1 extra)
Plastic Clip
10 pcs. (+1 extra)
M3.5x19
Plastic Clip Screw
10 pcs. (+1 extra)
Handle
4 pcs.
M7x10
Varianta Screw
12 pcs. (+1 extra)
Right Guide
3 pcs.
Right Runner
3 pcs.
Assembly Instructions 2/10

Assembly Instructions 3/10
IMPORTANT
Use a soft cloth between these parts and the floor.
Do not use power tools above 8 volts to assemble.
STEP 1
Insert Cam Lock Screws into pre-drilled holes
in Top (A), Side Frame (B), Middle Panel (D),
Supports (G), (H) and Posts (E), (F), then tighten.
(See Figure 1)
Attach Left Guides to Side Frame (B) and Middle Panel (D) with Varianta Screws.
(See Figure 2)
Insert Insert into pre-drilled hole in Post (F), insert Cam Lock Screw (long) into Insert, then tighten.
Cover Insert with Insert Cover.
(See Figure 4)
Figure 1
A
B
Varianta Screw
Left Guide Cam Lock Screw
Insert Cover
Insert
Cam Lock Screw (long)
E
G
Figure 2 Figure 3 Figure 4
D
F
H

Assembly Instructions 4/10
STEP 4
Attach Supports (G), (H), (I) and Posts (E), (F)
to Side Panel (C) with Dowels and Cam Locks.
(See Figure 5)
Cover Cam Locks with Insert Covers.
(See Figure 6)
Attach Right Guides to unit
with Varianta Screws.
STEP 2
Attach Back Rail (L) to Back Rail (M)
with Assembly Screw. L
M
Assembly Screw
Assembly Screw
Dowel
STEP 3
Attach unit and Rail (K)
to Middle Panel (D) with
Dowels and Assembly Screws.
D
K
F
E
C
G
H
I
Varianta Screw
Right Guide
Insert Cover
Cam Lock
Dowel
Figure 5
Figure 6

Assembly Instructions 5/10
STEP 6
Attach Back Rail (N) and Side Frame (B) to
unit from Step 3 with Dowels, Cam Lock Screw and Cam Locks.
Attach Rail (J) and Side Panel (C) to unit with Dowels and Cam Locks.
Cover Cam Locks with Covers.
STEP 5
Cover Cam Locks with Covers.
(See Figure 7)
B
C
N
J
Cam Lock
Cover
Dowel
Cam Lock Screw
Figure 7
Cover

Instructions 3/6
Assembly Instructions 6/10
Dowel
Assembly Screw
O
O
STEP 7
Place Base (O) upside down on a soft cloth.
Attach Casters to Base (O) with Caster Screws into pre-drilled holes, with Locking Casters
at front. (See Figure 8)
Note: Arrow label indicates front of unit.
STEP 8
Slide Back Panel (P) into position.
Attach Base (O) to unit with
Dowels and Assembly Screws.
Non-Locking Caster
Caster Screw
Arrow label at front
Locking Caster
Figure 8
P

Cover
Cam Lock
Dowel STEP 10
Attach Top (A) to unit
with Dowels and Cam Locks.
Cover Cam Locks with Covers.
Insert Adjustable Pins into side panel
and middle panel at desired level.
(See Figure 10)
Figure 10
A
Adjustable Pin
STEP 9
Turn unit to its upright position.
Attach Side Bars to unit with
Head Cap Bolts into pre-drilled holes.
Attach Plastic Clips to unit with
Plastic Clip Screws. (See Figure 9)
Side Bar
Head Cap Bolt
Plastic Clip
Plastic Clip Screw
Assembly Instructions 7/10
Figure 9

Part List
R2.
Drawer Back
1 pc.
R5.
Drawer Bottom
1 pc.
R6.
Support
2 pcs.
R1.
Drawer Front
1 pc.
R3.
Drawer Side
1 pc.
R4.
Drawer Side
1 pc.
R5
R6
R6
Drawer (R)
Cam Lock
Cam Lock Screw
Dowel
Flat Head Screw
R1
R2
R3
R4
Dowel
Cam Lock Screw
Cam Lock
Cover
STEP 11
Attach Drawer Sides (R3) and
(R4) to Drawer Front (R1) with
Cam Lock Screws, Dowels and Cam Locks.
Cover Cam Locks with Covers.
Handle
Plastic Clip Screw
Plastic Clip
Wood Screw
Left Runner
Roller at back
Right Runner
Assembly Instructions 8/10
STEP 12
Slide Drawer Bottom (R5) into groove.
Attach Supports (R6) and Drawer Back (R2)
to unit with Cam Lock Screws, Dowels,
Cam Locks and Flat Head Screws.
STEP 13
Attach Left Runner and
Right Runner to unit with Wood Screws.
Attach Plastic Clips to unit with Plastic Clip Screws.
STEP 14
Attach Handles with Machine Screws (long).
Machine Screw (long)

Part List
S2.
Drawer Back
2 pcs.
S5.
Drawer Bottom
2 pcs.
S3.
Drawer Side
2 pcs.
S4.
Drawer Side
2 pcs.
S5
Drawer (S)
Flat Head Screw
S2
S3
S4
S1 Cam Lock
Cover STEP 15
Attach Drawer Sides (S3) and
(S4) to Drawer Front (S1) with
Cam Lock Screws, Dowels and Cam Locks.
Cover Cam Locks with Covers.
Handle
Wood Screw
Left Runner
Roller at back
Right Runner
Assembly Instructions 9/10
STEP 16
Slide Drawer Bottom (S5) into groove.
Attach Drawer Back (S2) to unit with
Flat Head Screws.
STEP 17
Attach Left Runner and
Right Runner to unit with Wood Screws.
Attach Plastic Clips to unit with Plastic Clip Screws.
STEP 18
Attach Handle with Machine Screws.
Machine Screw
Cam Lock Screw
Dowel
Plastic Clip Screw
Plastic Clip
S1.
Drawer Front
2 pcs.

Assembly Instructions 10/10
STEP 19
Place Shelves (Q) into position.
Slide Drawers (R) and (S) into position.
Q
Q
R
S
S