Home Styles HS-5050 User manual

IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damage occurring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Part List
Home Styles Consumer Assistance: www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Hardware List
88 5050 103
Modern Craftsman
3 Tier Tower
B.
Side Frame
1 Pc.
Hex Wrench
1 Pc.
Small
Hex Wrench
1 Pc.
Head Cap Bolt
8 Pcs.(+1 extra)
Flat Washer
8 Pcs.(+1 extra)
Spring Washer
8 Pcs.(+1 extra)
Tapered Head Cap Bolt
8 Pcs.(+1 extra)
Wood Screw (long)
6 Pcs.(+1 extra)
Wood Screw (short)
4 Pcs.(+1 extra)
Tools recommended for assembly : Level
C.
Side Frame
1 Pc.
D.
Back Stretcher
1 Pc.
E.
Back Stretcher
1 Pc. F.
Back Frame
1 Pc.
G.
Front Stretcher
1 Pc.
H.
Front Stretcher
2 Pcs.
A.
Top
1 Pc.
I.
Shelf
2 Pcs.
Tools required for assembly : Phillips screwdriver

Assembly Instructions 2
IMPORTANT
* Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Do not tighten up all the bolts until each part is properly assembled.
* Use a soft cloth between these parts and the oor.
STEP 1
Attach Back Stretcher (D) and Back Stretcher (E)
to Back Frame (F) with Tapered Head Cap Bolts.
Tighten all Bolts with Hex Wrench.
(See Figure 1)
STEP 2
Attach Front Stretcher (G) to Side Frame (C) with Tapered Head
Cap Bolts.
Attach unit from Step 1, Front Stretchers (H) and Side Frame (B)
to unit with Head Cap Bolts, Spring Washers, Flat Washers and
Tapered Head Cap Bolts.
Tighten all Bolts with Hex Wrench. (See Figure 2)
C
B
H
G
H
B
D
B
F
B
E
Figure 1
Figure 2
/3
Tapered Head Cap Bolt
Tapered Head Cap Bolt
Head Cap Bolt
Spring Washer
Flat Washer

Assembly Instructions 3/3
STEP 3
Turn the unit over to its’ upright position.
Place Top (A) and Shelves (I) into position.
STEP 4
Place Top (A) onto unit with Wood Screws (short).
Attach Shelves (I) to unit with Wood Screws (long).
To level the unit, adjust the adjustable levelers on the
bottom of legs.
(See Figure 3)
Note: Unit must be level to work property.
Figure 3
Wood Screw (short)
Wood Screw (long)
A
I
I
I
I
A