HOME8 FDS1300 User manual

User Manual
Fall Detector
(FDS1300)
1

Device Activation
In the App sidebar menu, tap “Device
Management”, tap “+” in upper-right corner, and
then select “Sensor”.
21 3
Notice: The device activation steps are only for adding new devices.
2

Scan the QR code on the back of the sensor.
Once the fall detector has been successfully added,
“Fall Detector has been added successfully” will
show up on the top of the App.
You can find Fall Detector icon in your Sensor List
appear in grey color.
3

To activate, power up your fall
detector, the LED indicator will turn
green for a second and then turn
red.
Meanwhile, the sensor icon will
become red and is ready for
use.
4

Function and Notification
Attach the lanyard and
wear the fall detector as
pendant.
Fall detector triggered alarm
Note: Fall detection technology follows basic physics
principles that detect the movement of human body’s
velocity –impact –stable (whatever direction) to identify a
fall down situation.
Note: For the best use of this sensor, it is recommend to keep the
length of lanyard as short as within your comfortable zone.
5

“Fall detected” notification will
be sent when fall situation has
been detected.
The notification will be sent
again till someone presses
sensor’s centre button.
Once a fall down situation has been
detected, the fall detector will start
beeping and the LED will be flashing
red. Local Siren will be triggered after
10 seconds.
Beep…Beep….
Notification
Alarm Cancelation:
Before local Siren sounded, you can cancel the alarm by short
pressing the centre button. Fall detector will stop beeping and
No notification will be sent.
6

By pressing and hold the central button
for 3 seconds, an emergency alarm will
be triggered for notifying the caregivers
in case of any emergency situation.
To cancel, press the button again.
Emergency button triggered alarm
The owner and authorized users
will get a push notification of
“Emergency”.
The notification will be sent
again till someone presses
sensor’s centre button.
7

Other information
Power Consumption
7days
(under the assumption that the sensor is triggered twice a day . It is
recommended to charge daily to avoid the sensor stops response
during usage)
Low Battery Alarm
Low battery only alarms when another alarm
triggered or heartbeat.
LED Indicator Status
•Charging: red LED lighting
•Fully Charged: green LED lighting
•Stand By: green LED flashing（15s in average）
•Alarm: red LED flashing
•Low power : red and green LED flashing
8