HOMEDEPOT HOME DECORATORS Series User manual

1/12
ASSEMBLY INSTRUCTIONS
BF-24688 PROVENCE SINGLE BOOKCASE
Made In China

JKL
IH
G
BACK PANEL-1PC
LEFT SIDE PANEL-1PC
C
F
BA
ED TOP PANEL-1PC LEGS-4PCS
PARTS LIST
2/12
FRONT PANEL-1PC
PANELS-2PCS
Thank you for purchasing this quality product.Be sure to check all packing
carton during shipment. Count all parts and material hardware and
compare with parts list to ensure all parts are present.If any parts are
missing or damaged,phone,fax,or mail to our Customer Service
numbered to assure fast,easy and correct assembly.
Follow instructions listed below in proper sequence as
Department.For efficient and speedy service please indicate the
material carefully for small parts,which may have came loose inside the
model number and code letter of part(s) needed
IMPORTANT NOTE:
BOTTOM PANEL-1PC
RIGHT SIDE PANEL-1PC
SHELVES-4PCS
CAM-BOLTS-15PCS CAM-LOCKS-15PCS
ACROSS PANEL-1PC

V
3/12
NOTE:THE SURFACE WITH THE STICKER IS THE BACK SIDE.
SCREWS-8PCS
CAM-TOOL-1PC
ALLEN WRENCH-1PC
MNO
R
Q
P
STU
SCREWS-26PCS
SHELF SUPPORTS-16PCS
SCREWS-6PCS
HANGERS-4PCS
HOOKS-4PCS
SCREWS-4PCS PLASTIC BELTS-2PCS
SCREWS-4PCS
MAT SLICES-8PCS
FEET-4PCS
WX
Y

SHOULDER
HOW TO USE THE CAM-TOOL
NOTE:
NOTE:
LEAST TWO PEOPLE.
K
4/12
NOTE:
ARROW
L
THE ARROWS ON THE HIDDEN CAM-LOCKS SHOULD POINT TO THE CAM-BOLTS
TO PREVENT DAMAGE DURING ASSEMBLY,PLEASE ASSEMBLE THIS ITEM WITH AT
UPON OPENING THOROUGHLY CLEAN ALL WOOD SURFACES TO REMOVE DUST
AND DIRT THAT MAY HAVE SETTLED ONTO FINISH DURING SHIPMENT.IN ORDER
TURN THE CAM-BOLT SCREWS UNTIL THEY
AGAINST THE SURFACE OF THE PART.
ARE TIGHT, THE SHOULDER SHOULD BE
ARROW

T
HOW TO USE THE ALLEN WRENCH
V
C
C
C
C
B
F
J
SJ
S
V
T
UU
X

PLACE CAM-BOLTS(K)INTO HOLES IN PANEL(I)AND ATTACH USING 4 CAM-LOCKS(L).
ROTATE THE 4 CAM-BOLTS(K)INTO HOLES IN SIDE PANELS(D/E).
K
L
I
A
F
L
K

B
K
L
E
D

A
K
L
DE

S
J
J
W

H
H
H
H

G
The anti-tip hardware must be used as part of assembly!
Warning
QQ
P
P
R

Q
Q
O
MQ
N
wall
DRILL 4 HOLES INTO WALL,PLEASE REFER TO THE REAR TOP PANEL'S HOLES DISTANCE AND HEIGHT.
PUT 4 HANGERS(N)INTO HOLES IN THE WALL,AND ROTATE 4 SCREWS(M) INTO HANGERS(N).
CONNECT THE TWO HOOKS WITH A PLASTIC BELT.