HOMEDEPOT 6209N57-01-KD User manual

PAGE 1
ASSEMBLY INSTRUCTIONS
CONSOLE TABLE
MODEL # 6209N57-01-KD
WE ARE HERE TO HELP!
LINON HOME DECOR PRODUCTS, INC.
PLEASE READ ALL INSTRUCTIONS IN THIS BOOKLET BEFORE
STARTING ASSEMBLY.
IMPORTANT:
TOLL FREE NUMBER 1.800.262.1852
MADE IN BRAZIL
FOR LINON HOME DECOR PRODUCTS, INC.
TEL: [phone] FAX: [phone]
e-mail: [e-mail]
WE TRY TO INSURE THAT YOUR FURNITURE ARRIVES IN EXCELLENT
CONDITIONS.OUR SERVICE REPRESENTATIVES ARE READY TO HELP YOU
WITH QUICK SERVICE.PLEASE CALL IF A PART IS DAMAGED OR MISSING.
PLEASE CALL PRIOR TO RETURNING THE ITEM TO THE STORE. OUR OFFICE
IS OPEM 9 AM TO 5 PM EASTERN STANDARD TIME.
05/03
50”
18 7/8”
29 1/8”

A
08SCREW 2 3/4”
ALLEN WRENCH
ADHESIVE FELT
01
04
B
C
1 - TABLE TOP
2 - LEGS (4X)
STEP 1)
1.1. FIX LEG # 02 (4x) TO TABLE TOP # 1 USING (08) SCREWS (A) - TWO PER
LEG - AND AN ALLEN WRENCH (PROVIDED “B”), AS SHOWN ON FIGURE 1.2.
PAGE 3PAGE 2
OPEN HARDWARE PACKAGE ON A FLAT SURFACE COVERED WITH NEWSPAPER.
COUNT EACH PIECE OF HARDWARE TO MATCH THE QUANTITY NUMBER IN THE
HARDWARE LIST COLUMN. CALL CUSTOMER SERVICE IF ANY PARTS ARE MISSING.
FOLLOW THE LETTER IDENTIFICATION WHEN READING THE ASSEMBLY DRAWING
"A" THROUGH "C".
HARDWARE PACKAGE COUNT.
HARDWARE IDENTIFICATION
PARTS IDENTIFICATION
1
IMPORTANT:
PLEASE USE ALL THE HARDWARE MENTIONED ABOVE.
THEY WILL ASSURE THE ITEM STABILITY AND SAFETY.
TOOLS REQUIRED
AN ALLEN WRENCH (PROVIDED “B”) IS REQUIRED TO ASSEMBLE
THIS UNIT.
2
2
2
2
FIGURE 1.2
A
1
2
2
2
2
A
B
1
2
C
C
C
C
C
ATTENTION NOTE:
BEFORE USING THIS UNIT, ATTACH (04) ADHESIVE FELTS (C) TO THE
BOTTOM OF EACH LEG #02 IN ORDER TO AVOID DAMAGES TO FLOOR.
ATTENTION:
ASSEMBLE DESK FACING DOWN ON A CLEAN SURFACE (CARPET,
CARTON, ETC...) TO AVOID SCRATCHING THE SURFACE.