HomeSpot BTADP-236-LL User manual

TECHNICAL
SPECIFIC
A
TIONS
Blue
t
ooth
Blue
t
ooth
V4.2
A2DP
Ope
r
ating Distance
T
ypically 10m / 33ft
Cha
r
ging Input
DC 5V/ 0.5A
W
eight
26g / 0.92
o
z
Model
B
T
ADP-236-LL
The Bluetooth word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks
by HomeSpot is under license.
Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or its subsidiaries.
Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other
countries. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the
United States and other countries.

PACKAGE CONTENTS
PRODUCT OVERVIEW
1) Pairing Indicator 5) 3.5mm Audio Output
2) aptX Indicator 6) micro-USB Charging Jack
3) aptX-LL Indicator
4) Pairing / MultiLink Button

aptX and aptX Low Latency codec.
AAC / SBC Mode
(1) Pairing Indicator light on.
aptX Mode
(1) Pairing Indicator & (2) aptX
Indicator lights on.
aptX Low Latency Mode
(1) Pairing Indicator & (3) aptX-LL
Indicator lights on.
Qualcomm aptX Low Latency

Connect the Bluetooth Receiver to the audio input on your
audio / video system. You can either connect with 3.5mm
or RCA audio connection. Consult your audio / video
system user manual for more information on how to
accomplish this.
Connect the micro-USB cable to the Bluetooth Receiver,
plug the power adapter (10) into a power outlet.
The Indicators (1) & (2) will flash alternately with voice
turned on.
TIPS : If your audio system has a RCA audio input por
t, use
the bundled RCA cable for better user experience.
SETTING UP YOUR BLUETOOTH RECEIVER
ANALOG IN

1. The Bluetooth Receiver will enter into Pairing Mode
2. The Indicators (1) & (2) will flash alternately.
3. Activate the Bluetooth function on your Bluetooth
HomeSpot
aptXLL XX
XX
installations.
4. Once paired and connected, 1 low tone will be
played. The Indicator (1) will be turned on.
5. The Bluetooth Receiver is then ready to stream audio
from your device to the connected sound system.
6. If your device supports aptX, the Indicator (2) will be
on during audio streaming.
7. If your device supports aptX-Low Latency, the
Indicator (3) will be on during audio streaming.
The Bluetooth Receiver will remain in Pairing Mode for
120 seconds, or until it is successfully paired.
Upon powering up, the Bluetooth Music Receiver will try
reconnecting to the last connected device.
If reconnection fails, the Bluetooth Receiver will enter
idle mode (Indicator (1) blinks slowly). Press and hold
Button (4) for 1 second to switch the Bluetooth Receiver
into Pairing Mode.
The Bluetooth Receiver can receive audio from two
PAIRING YOUR BLUETOOTH RECEIVER
AUTO-RECONNECT

mobile devices or Bluetooth transmitter devices
simultaneously.
1.
2. Stop audio streaming.
3. Press and hold the Button (4) for 1 second to force the
Bluetooth Receiver into Pairing Mode, you will hear
4. First device will be disconnected
5. Pair and connect with the 2nd device.
6.
7. Now both devices are connected to the Bluetooth
Receiver.
8. Upon powering up, the Bluetooth Receiver will try to
reconnect to both devices automatically.
9.
connections, do a Factory Reset on the Bluetooth
Receiver.
1. Power on the Bluetooth Receiver.
2. Disconnect all the connection with mobile phone.
3. Press and hold the Button (4) for 3 seconds until 2 low
tone is played.
4. Remove power connection.
5. All pairing records will be cleared from memory, and
the Bluetooth Receiver will enter into Pairing Mode
upon powering up.
MULTIPOINT CONNECTIONS
FACTORY RESET