HomeSpot HS-BTADP-258-LR User instructions

www.homespotdigital.com
The Bluetooth word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks
by HomeSpot is under license.
Qualcomm aptX is a product of Qualcomm Technologies, Inc. and/or its subsidiaries.
Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other
countries. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the
United States and other countries.

PACKAGE CONTENTS
Micro USB Cable 3.5mm Aux Cable RCA Audio Cable
Optical TOSLINK Cable
Antenna
Power Adapter
Bluetooth Receiver
Awesome!
User Guide &
Warranty Card

1) Pairing Indicator 5) TOSLINK Digital Output Jack
2) aptX Indicator 6) Antenna Connector
3) aptX-LL Indicator 7) Pairing Button
4) Coaxial Digital Output Jack 8) 3.5mm Audio Output Jack
9) micro-USB Charging Jack
PRODUCT OVERVIEW

AAC / SBC Mode
(1) Pairing Indicator light on.
aptX Mode
(1) Pairing Indicator & (2) aptX
Indicator lights on.
aptX Low Latency Mode
(1) Pairing Indicator & (3) aptX-
LL Indicator lights on.
Qualcomm aptX Low Latency
aptX and aptX Low Latency codec.
The Bluetooth Receiver supports AAC, SBC, Qualcomm

Install the Antenna to the (6) Antenna Connector. Connect
the Bluetooth Receiver to the audio input on your audio /
video system. You can either connect with 3.5mm, RCA,
Optical TOSLINK or Digital Coaxial audio connection.
Consult your audio / video system user manual for more
information on how to accomplish this.
Connect the Bluetooth Receiver with the Power Adapter
using the supplied micro-USB cable.
The Indicators (1) & (2) will flash alternately with voice
prompt “Power On” to indicate that the unit is turned on.
SETTING UP YOUR BLUETOOTH RECEIVER

1. The Bluetooth Receiver will enter into Pairing Mode
on the first time you power on.
2. The Indicators (1) & (2) will flash alternately.
3. Activate the Bluetooth function on your Bluetooth
A2DP device. Search for “HomeSpot LongRN XX”
and select to pair.
4. Once paired and connected, 1 low tone will be
played. The Indicator (1) will be turned on.
5. The Bluetooth Receiver is then ready to stream audio
from your device to the connected sound system.
6. If your device supports aptX, the Indicators (1) and
(2) will be turned on.
7. If your device supports aptX-Low Latency, the
Indicators (1) and (3) will be turned on.
The Bluetooth Receiver will remain in Pairing Mode for
120 seconds, or until it is successfully paired.
The Bluetooth Receiver can be connected to two mobile
devices or Bluetooth transmitter devices simultaneously.
1.
2. Stop audio streaming.
Pair the first device (follow Pairing section).
3. Press and hold the (7) Pairing Button for 3 seconds
to force the Bluetooth Receiver into Pairing Mode,
you will hear voice prompt “Pairing”.
4. First device will be disconnected
5. Pair and connect with the 2nd device.
Connect to the Bluetooth Receiver from the first
6.
PAIRING YOUR BLUETOOTH RECEIVER
MULTIPOINT CONNECTIONS

device.
7. Now both devices are connected to the Bluetooth
Receiver.
8. If you have difficulties in establishing multipoint
connections, do a Factory Reset on the Bluetooth
Receiver.
9. The Bluetooth Receiver can only receive audio stream
from one device at a time.
The Bluetooth Receiver will search for the last two
connected devices for 60 seconds upon power up, and will
automatically connect to the last two connected devices.
Two Bluetooth Receivers can connect to each other for
Bluetooth extension.
1. Reset both Bluetooth Receivers by pressing and
holding the (7) Pairing Button for 8 seconds until 2 low
tone is played.
2. Power on both Bluetooth Receivers.
3. Double press the (7) Pairing Button on both Bluetooth
Receivers, a voice prompt “Repeat Mode Enabled” will
be played from both Bluetooth Receivers.
4. A voice prompt “Repeat Mode Connected” will be
played once the two Bluetooth Receivers are
connected to each other.
5. Press and hold (7) Pairing Button for 3 seconds on one
of the Bluetooth Receivers to switch it into Pairing
Mode.
BLUETOOTH REPEATER

6. Pair and connect the Receiver with your mobile device.
7. You can now stream audio from your mobile device to
both Bluetooth Receivers simultaneously.
NOTE: Multipoint function will be disabled during
Bluetooth Repeat Mode.
Blue
t
ooth Specifications
Blue
t
ooth V4.2
A2DP
Operating Distance
Bluetooth Profile
T
ypically 50m / 164ft
Cha
r
ging Input
DC 5V/ 0.5A
W
eight
74g / 2.61oz
Model
HS-
B
T
ADP-258-LR
FACTORY RESET
TECHNICAL SPECIFICATIONS
1. Disconnect from all mobile devices.
2. Press and hold the (7) Pairing Button for 8 seconds
until 2 low tone is played.
3. Disconnect the power source and reconnect to the
Bluetooth Receiver.
4. All pairing records will be cleared from memory, and
the Bluetooth Receiver will enter into Pairing Mode
upon powering up.