Honeywell RCWL330A User manual

Installation
Instructions
RCWL330A (51459SL)
P4 Premium Portable Plus Wireless Chime and Push
69-2148EFS-01
69-2148EFS_A.indd 1 3/20/2008 9:34:24 AM

Installation Instructions
69-2148EFS—01 ii
Contents
Checking pack contents .........................................................................................................................1
Safety .......................................................................................................................................................2
Quick start................................................................................................................................................2
Open the bell push ..................................................................................................................................3
Install the push battery ...........................................................................................................................4
Install the chime battery..........................................................................................................................4
Switch positions ......................................................................................................................................5
Sliding window.........................................................................................................................................6
Volume control.........................................................................................................................................7
Use of icons.............................................................................................................................................8
Programming procedures .....................................................................................................................10
Recall function.......................................................................................................................................11
Chime sounds........................................................................................................................................11
Mount bell push.....................................................................................................................................12
Chime position.......................................................................................................................................13
Troubleshooting .....................................................................................................................................14
Specifications ........................................................................................................................................16
Disposal and recycling..........................................................................................................................17
Declaration.............................................................................................................................................17
Guarantee ..............................................................................................................................................17
69-2148EFS_A.indd 2 3/20/2008 9:34:24 AM

RCWL330A
1 69-2148EFS—01
Premium Portable Plus Wirefree Chime with Push
Thank you for choosing this Honeywell product. Please use the following instruc-
tions to ensure correct installation and use. Keep these notes in a safe place for
future reference.
Checking Pack Contents
Unpack your chime kit and identify the
following parts:
• Chime
• Chime bracket
• Bell push
• CR2032 battery for bell push
• 4 self-adhesive icons strips (2 pre-
fitted on chime)
• 2 screws for push
• 2 screws for chime wall bracket
• 2 wall plugs
• Adhesive pad
You will need:
• A Phillips-head screwdriver
• A small flat-bladed screwdriver
• A 1/4-in. (6 mm) masonry drill
• 4 LR14 “C” alkaline batteries
69-2148EFS_A.indd 1 3/20/2008 9:34:24 AM

Installation Instructions
69-2148EFS—01 2
Safety
Before proceeding with the installation, please note the following safety warnings:
• Always follow the manufacturer’s advice when using power tools and wear
suitable protective equipment (e.g. safety goggles) when drilling holes, etc.
• Before drilling holes in walls, check for hidden electricity cables and water pipes.
The use of a cable/pipe locator is advisable if in doubt.
Quick Start
The bell push supplied with this kit is pre-programmed to operate with the chime. You
need to do the following to get started:
• Open the bell push
• Install the push battery
• Install the chime batteries
• Check the chime switch setting
• Check the volume setting
When you operate the bell push, the
chime will sound and the first icon will
flash. If you have additional pushes or
you want to assign a different icon to
your push, you will need to follow the
programming procedure.
69-2148EFS_A.indd 2 3/20/2008 9:34:24 AM

RCWL330A
3 69-2148EFS—01
Open the Bell Push
Insert a flat-bladed screwdriver into the slot A, at the base of the push.
Carefully lever the cover and base apart (Fig. 1).
M27269
A
Fig. 1
69-2148EFS_A.indd 3 3/20/2008 9:34:24 AM

Installation Instructions
69-2148EFS—01 4
Install the Chime Batteries
To remove the chime battery cover, press at point C
and slide the cover back, then lift off. Insert
4 LR14 “C” alkaline batteries (not
supplied). Observe polarity as
marked inside the battery com-
partment (Fig. 3).
M27270
C
Fig. 3
Install the Bell Push Battery
Insert the CR2032 coin cell. Ensure the face
marked “+” is facing up (Fig. 2).
M27153
CR2032
+
CR2032
+
Fig. 2
69-2148EFS_A.indd 4 3/20/2008 9:34:24 AM

RCWL330A
5 69-2148EFS—01
Switch Positions
Mute with flash on
To keep the flash on and turn the
sound off, set switch (D) to posi-
tion 1.
Flash off with sound on
To turn the blue flashing light off,
set switch (D) to position 3.
Normal operation
For normal operation (sound and
flashing light on), set switch (D) to
position 2.
1 2 3
M27286
D
Fig. 4
69-2148EFS_A.indd 5 3/20/2008 9:34:24 AM

Installation Instructions
69-2148EFS—01 6
Sliding Window
Release the catch (E) and slide open the window.
M27271
E
23
1
56
Fig. 5
Shown with number
icon strips.
69-2148EFS_A.indd 6 3/20/2008 9:34:24 AM

RCWL330A
7 69-2148EFS—01
Volume Control
The volume control is behind the sliding window on the front
of the chime. Initially, set the control to mid-point. After you
have tested your system, adjust to the desired volume.
M27272
VOLUME
CONTROL
23
1
56
Fig. 6
69-2148EFS_A.indd 7 3/20/2008 9:34:24 AM

Installation Instructions
69-2148EFS—01 8
Use of Icons
In addition to the chime sounds, your chime has a visual indication to show which
device has activated it. An icon will illuminate when the chime is activated by a bell
push or another compatible device. The chime supports six icons:
MAIN
DOOR
BACK
DOOR
ALERT
SYMBOL
INTRUDER TELEPHONE PAGER/
KEY FOB
M27289
69-2148EFS_A.indd 8 3/20/2008 9:34:24 AM