Honeywell CT3600 Installation and operating instructions

® U.S. Registered Trademark
Copyright © 2002 Honeywell • •All Rights Reserved
OWNER’S GUIDE ADDENDUM
69- 1583- 1
CT3600, CT3611, CT3500, CT3595,
CT8602 Thermostats
FURNACE AIR FILTER, HUMIDIFIER
PAD AND ULTRAVIOLET (UV) LAMP
TIMERS
Your thermostat has up to three timers that remind you to
change or clean your furnace air filter, whole-house
humidifier pad or UV (ultraviolet air treatment system)
lamp.
Customize Your Timers (See Owner’s
Guide for Instructions on Entering
Customize Mode)
Furnace Air Filter Timer (Feature No. 43)
Filter timer options:
0 = off
1 = 30 days
2 = 90 days (preset)
3 = 180 days
4 = 365 days
To change your filter timer:
❑Press ▲ until display shows the desired number of
days.
❑Press Time ▲ to move to next feature or press Run
Program to return to main display.
NOTE: The filter time is based on calendar days.
Humidifier Pad Timer (Feature No. 44)
Humidifier pad timer options:
0 = off
1 = 90 days
2 = 180 days
3 = 365 days
To change your humidifier pad timer:
❑Press ▲ until display shows the desired number of
days.
❑Press Time ▲ to move to next feature or press Run
Program to return to main display.
NOTE: The humidifier pad time is based on calendar
days. See your humidifier instructions for com-
plete details on replacing and/or cleaning your
humidifier pad.
Ultraviolet (UV) Lamp Timer (Feature No. 45)
UV lamp timer options:
0 = off (preset)
1 = 365 days
To change your UV lamp timer:
❑Press ▲ until display shows the desired number of
days.
❑Press Time ▲ to move to next feature or press Run
Program to return to main display.
NOTE: The UV lamp time is based on calendar days.
See your UV lamp instructions for complete
details on replacing your UV lamps.
M2024
6
M2024
5
FEATURE
NUMBER OPTION
M2024
7

69-1583-1 G.H. Rev 05-02 www.honeywell.com/yourhome
CT3600, CT3611, CT3500, CT3595, CT8602 THERMOSTATS
Printed in U.S.A. on recycled
paper containing at least 10%
post-consumer paper fibers.
Automation and Control Solutions
Honeywell Honeywell Limited-Honeywell Limitée
1985 Douglas Drive North 35 Dynamic Drive
Golden Valley, MN 55422 Scarborough, Ontario
M1V 4Z9
View or Reset Timer Settings
When the thermostat activates a timer, the thermostat
flashes Filter until the timer resets.
1. Reset the timer by pressing the i key until the
expired timer is displayed.
2. Press the time ▲key to reset the timer.
3. Press the Run Program key.
NOTE: You can view the number of days remaining at
any time by pressing the ikey three or four
times. If more than one timer is active, all active
timers show sequentially when pressing the i
key several times.
For complete instructions on replacing or cleaning your
furnace filter, humidifier pad or UV lamp, see the product
owner’s manuals. Contact your local contractor or visit
www.honeywell.com/yourhome.
M2024
3
Filter Days
M2024
4
Filter Days