Honeywell T6 Pro Z-Wave User manual

T6 Pro Z-Wave
Programmable Thermostat
User Guide
*TH6320ZW2003 depicted. Other models may vary.
Actual size 4.09'' x 4.09'' x 1.06''
This user guide is designed to help you get acquainted with your new T6 Pro ZWave
thermostat. Check out the table of contents on page 2 to browse by topic.
Welcome
Web: yourhome.honeywell.com/
Phone: 18004681502
Social: Twitter: @HoneywellHome, Facebook: Honeywell Home
Need help? Get in touch.

2
Table of contents
Thermostat features................................................................................................................ 3
Thermostat overview............................................................................................................... 4
Basic thermostat operation
Adjusting the temperature ....................................................................................................................4
Program schedule overrides.................................................................................................................5
Adjusting the temperature in Auto mode ......................................................................................6
Selecting system mode...........................................................................................................................7
Built-in compressor protection...........................................................................................................8
Setting the fan .............................................................................................................................................8
Main menu settings
ZWave setup................................................................................................................................................9
ZWave connection status.....................................................................................................................10
Main menu overview.................................................................................................................................11
Scheduling options ...................................................................................................................................12
Setting a schedule.....................................................................................................................................13
Reset schedule ............................................................................................................................................14
Screen lock settings..................................................................................................................................14
Adjusting backlight brightness...........................................................................................................15
Enabling/disabling Adaptive Intelligent Recovery....................................................................15
Setting the time and date ......................................................................................................................16
Cleaning the thermostat screen.........................................................................................................16
Choosing Fahrenheit or Celsius.........................................................................................................17
Viewing equipment status.....................................................................................................................17
Viewing thermostat information.........................................................................................................18
Battery replacement .................................................................................................................................19
Alerts and maintenance reminders ................................................................................... 20
Appendices
Troubleshooting..........................................................................................................................................22
5-year warranty............................................................................................................................................23
General system information .................................................................................................................24
Regulatory information...........................................................................................................................24

3
Thermostat features
The Honeywell T6 Pro ZWave Programmable Thermostat is a ZWave Plus certified
thermostat designed to work with any ZWave compliant controller or gateway for easy
programming and automation to deliver energy savings and comfort at the same time.
When integrated with the app that controls your ZWave controller, it lets you program
and control your home’s HVAC system as well as control other ZWave devices
connected to the same ZWave controller.
Smart Scheduling: You can choose whether you want the thermostat to follow just
Home/Away temperature triggered by your ZWave controller or if home, whether you
want to differentiate between Home/Sleep temperature.
The T6 Pro ZWave thermostat can also work as regular programmable thermostat
when disconnected from your ZWave network. You can program a schedule where
every day is different or a schedule where weekdays and weekends are different with
four periods per day.
Displays ambient air temperature, % relative indoor humidity and reports HVAC
system status: You can display actual temperature or % relative humidity, or to see
whether your cooling / heating system is running.
Auto change from heat to cool: When Auto mode is selected, the T6 Pro ZWave
thermostat can automatically determine whether your home needs heating or
cooling to reach the desired temperature at the right time.
Smart Alerts: The T6 Pro ZWave thermostat can alert you when your HVAC
system is not working properly and can remind you for things like when to change
your furnace filter.
Adaptive Intelligent Recovery: The T6 Pro ZWave thermostat learns your
heating and cooling cycle times to make sure the system delivers the temperature
you want, when you want it.
!

4
Mode
Touch to select
system mode:
• Auto (if enabled)
• Heat
• Cool
• Off
• Em Heat
(Emergency Heat)
Menu
Touch to program
a schedule and see
other customizable
options.
Fan
Touch to select fan
mode:
• Auto
• On
• Circulate
Desired temperature
Shows desired
indoor temperature.
Indoor Temperature/
% Relative Indoor
Humidity
Touch to display
either the current
indoor temperature
or current % relative
indoor humidity.
Adjust temperature
Touch or to
set your desired
temperature.
PM
Menu FanMode
Fan
Auto
Mode
Heat
Thermostat overview
Adjusting the temperature
To adjust the desired temperature up or down,
touch or on the thermostat home screen.
How long the change will be held depends on
whether your thermostat is included or excluded
in ZWave network and what schedule type is
selected.
AM
Menu FanMode
Fan
Auto
Mode
Heat
AwayHomeSleep
Following Schedule

5
Program schedule overrides
AM
AM
Heat On
Hold Until
Menu FanMode
Fan
Auto
Mode
Heat
AM
AM
Hold UntilPermanent Hold
Run Schedule
Back
AM
AM
Heat On
Hold Until
Menu FanMode
Fan
Auto
Mode
Heat
AM
AM
Hold UntilPermanent Hold
Run Schedule
Back
If the thermostat is included in ZWave network it typically follows the setting on your
ZWave controller. If you adjust the temperature setpoint, it overrides the current
setpoint until away state or new temperature setpoint is received from ZWave
controller. Setting of Hold until time and Permanent hold (see below) will not be
available on the thermostat screen.
If the thermostat is not included in the ZWave network and the thermostat is
following time based schedule, you can set what time the new temperature setpoint
will be held until or you can hold the new setpoint permanently.
There are several scheduling options available for the thermostat. For more
information go to page 12.
Program schedule override (temporary)
1 Touch or on the thermostat home
screen to set your desired temperature. Hold
Until will appear together with the time the
hold will end.
2 To change when the hold will end, touch the
time and wait until the time starts blinking.
Then, touch or to set when you want
the hold to end. Touch Hold Until once more
to confirm changes and return to the home
screen.
After the hold period ends, the thermostat will
automatically return to the program schedule. If
you want to cancel the hold, touch Hold Until and
then touch Run Schedule.
Program schedule override (perma-
nent)
1 Touch or on the thermostat home
screen to reach your desired temperature.
Hold Until will appear together with the time
you want the hold to end.
2 Touch Hold Until. Permanent Hold will appear
on screen. Touch Permanent Hold to hold this
temperature until you manually change it.
To end permanent hold and return to the
program schedule, touch Permanent Hold and then
touch Run Schedule.

6
Auto mode (when the thermostat automatically chooses heating or cooling to
reach your desired temperature) is disabled by default. If your heating or cooling
professional enabled it, you’ll see Auto appear as an option under Mode on the
thermostat home screen.
To choose your preferred temperatures for both heating and cooling in Auto mode,
follow the steps below.
Adjusting the temperature in Auto mode
1 Touch Mode on the thermostat home screen
until Auto appears. Then touch or to
choose your preferred temperature for the
mode that’s currently active (heating or
cooling).
2 Next, touch the text area where the active
mode is displayed to switch to the inactive
mode.
3 Touch or to choose your preferred
temperature in the other mode. After
5 seconds of inactivity, your setting will take
effect, and the thermostat screen will show
the set point of the active mode.
Auto Chg. On
AM
Heat On
Menu FanMode
Fan
Auto
Mode
Heat
AwayHomeSleep
Following Schedule
Auto Chg. On
AM
Heat On
Menu FanMode
Fan
Auto
Mode
Heat
AwayHomeSleep
Following Schedule
AM
Heat On
Menu FanMode
Fan
Auto
Mode
Heat
AwayHomeSleep
Following Schedule
Auto Chg. On
AM
Menu FanMode
Fan
Auto
Mode
Heat
AwayHomeSleep
Following Schedule

7
Current system mode (Heat, Cool, Off, Em
Heat) is displayed to the left of current indoor
temperature on the thermostat home screen.
The mode that’s currently running (Heat On, Cool
On, Em Heat On) is displayed in the upper-left
corner of the thermostat home screen.
To cycle through the available modes, touch Mode
on the thermostat home screen and select the
appropriate mode for your desired temperature.
• Heat: Controls the heating system.
• Cool: Controls the cooling system.
• Off: Turns the heating and cooling systems
off.
• Auto: When enabled, the thermostat will
automatically use heating or cooling to reach
the desired temperature.
• Em Heat: Controls auxiliary or emergency
heat; only available on systems with a heat
pump.
Notes:
• Em Heat and Auto modes may not appear
on the thermostat screen depending on your
equipment and how your thermostat was
installed.
• Em Heat is only available for heat pump
systems. The thermostat must also be
configured to control a heat pump and an
auxiliary/emergency heat stage.
• When Auto mode is selected, Auto Chg. On
will appear in the upper-right corner of the
thermostat home screen, and the active mode
(Heat or Cool) will display under Mode. To set
your temperature preferences in Auto mode,
see page 6.
Selecting system mode
AM
Menu FanMode
Fan
Auto
Mode
Heat
AwayHomeSleep
Following Schedule
AM
Menu FanMode
Fan
Auto
Mode
Cool
AwayHomeSleep
Following Schedule
Auto Chg. On
AM
Menu FanMode
Fan
Auto
Mode
AwayHomeSleep
Following Schedule

8
If the compressor is restarted too soon after
a shutdown, system damage can occur. The
built-in compressor protection feature forces
the compressor to wait a few minutes before
restarting, helping to prevent damage to the
heating or cooling system.
During the brief wait period, the thermostat will
flash Cool On (or Heat On if you have a heat
pump) until the wait period is over, at which point
the compressor will turn back on.
Note: The flashing Cool On or Heat On message
is also used for startup delay protection if AC
power loss occurs.
Built-in compressor protection
Setting the fan
Touch Fan on the thermostat home screen to
cycle through available fan modes until the
desired mode is displayed. Your changes will
save automatically.
Available fan modes:
• On: The fan will run continuously.
• Auto: The fan will run only when the heating
or cooling system is on.
• Circ: The fan will run at random intervals at
least 35% of the time to keep air circulating
throughout your home.
AM
Menu FanMode
Fan
Circ
Mode
Heat
AwayHomeSleep
Following Schedule
AM
Menu FanMode
Fan
On
Mode
Heat
AwayHomeSleep
Following Schedule
AM
Menu FanMode
Fan
Auto
Mode
Heat
AwayHomeSleep
Following Schedule
AM
Cool On
Menu FanMode
Fan
Auto
Mode
Cool
AwayHomeSleep
Following Schedule

9
To include or exclude the thermostat from ZWave
network, go to thermostat
MENU/ZWAVE SETUP.
• Touch Select. You will be asked to set your primary
controller to INCLUDE MODE. Please refer to
the user manual of your ZWave controller.
• After inclusion procedure has been initiated
on your ZWave controller, touch Select on the
thermostat.
• If the inclusion procedure is successful,
"INCLUDED", the node ID, and the ZWave
connected status icon appear on the screen.
If the procedure fails, “FAILED TO INCLUDE”
appears on the screen.
• Your controller will indicate whether the thermostat was successfully added to its
network. (Please refer to the user manual of your ZWave controller.)
NOTES:
• Before adding the thermostat to a ZWave network, check that it does not already
belong to one. If the thermostat is included in ZWave network, it offers to exclude.
If the thermostat is excluded from ZWave network, it offers to include. You can
also check the status by viewing the Node ID located in the thermostat MENU/
DEVICE INFO. An excluded thermostat should show zero for the Node ID (000).
• Whether you are including or excluding thermostat from your ZWave network, first
you have to initiate it on your ZWave controller. Please refer to the user manual of
your ZWave controller.
• For other specific tasks, such as adding the thermostat to home automation
scenes or groups, refer to the ZWave controller instructions.
• The T6 Pro ZWave thermostat works in the optional ZWave battery mode or
normal power mode based on its power source. The ZWave power mode can only
be changed when thermostat is NOT included in ZWave network. You can check
the power mode in the thermostat menu under MENU/DEVICE INFO.
• If 24 VAC power source is not used or available, the thermostat must be powered
by batteries. The thermostat will operate in LSS mode (power-save, sleep mode)
to help conserve battery life after it has been included in a ZWave network. The
ZWave radio supports beaming. It allows other devices in the network to wake up
the ZWave thermostat, accept commands, and then go back to sleep.
• If you need the thermostat to operate AOS mode (always listening mode) to
act as signal repeater and to increase network reliability, you need to ask your
professional installer to power the thermostat by 24 VAC.
ZWave setup
Cancel
Back Select
Back Select

10
ZWave connection status is located in the
upper-right corner of the screen.
• Thermostat is included and connected to a
ZWave network.
• Thermostat is excluded from a ZWave
network.
• Thermostat is either included in a ZWave
network but the ZWave signal is lost, or
is included but AC power is lost (battery
used as backup). In this case, ZWave
radio is turned off to preserve battery life.
AC power must be restored or you have to
change the power mode. It can be done via
excluding thermostat from ZWave network
and including again in battery power mode
where batteries are used as main power
source. You can check the actual power
mode in the thermostat
MENU/DEVICE INFO.
ZWave connection status
AM
Menu FanMode
Fan
Auto
Mode
Heat
Wake AwayHomeSleep
Following Schedule
Example of Wi-Fi is connected.
Wifi is on and
connected
Wifi is disconnected
or wifi is not setup
Wifi is off
AM
Menu FanMode
Fan
Auto
Mode
Heat
Wake AwayHomeSleep
Following Schedule
Example of Wi-Fi is connected.
Wifi is on and
connected
Wifi is disconnected
or wifi is not setup
Wifi is off
AM
Menu FanMode
Fan
Auto
Mode
Heat
Wake AwayHomeSleep
Following Schedule
Example of Wi-Fi is connected.
Wifi is on and
connected
Wifi is disconnected
or wifi is not setup
Wifi is off
AM
Menu FanMode
Fan
Auto
Mode
Heat
AwayHomeSleep
Following Schedule
Example of thermostat
included and connected in
a
Z-Wave network.

11
Touch Menu on the thermostat screen and then use the or arrows to page through
the following options.
Main menu overview
CLEAN SCREEN
Disable the touchscreen for
30 seconds so you can clean it.
TEMP SCALE
Choose Fahrenheit or Celsius.
RESET
Schedule: Resets to the default
MondayFriday, SaturdaySunday
schedule.
EQMP STATUS
View current status of your heating or
cooling equipment.
DEVICE INFO
View your thermostat’s device
information, such as ZWave power
mode, ZWave node, home ID, and
model number.
ALERTS
View, snooze or dismiss active alerts
and reminders (available only when you
see the active alert symbol on the
thermostat home screen).
Navigating the menus
Menu: Touch to access all options and sub-menus.
or :Touch to page through options and sub-menus.
or : Touch to adjust things such as temperature, time and date.
Back or Cancel: Touch to discard changes or go back to the previous menu.
Select: Touch to access a sub-menu.
Done: Touch to confirm selection.
Tip: You can touch Select to access a sub-menu, or you can touch the text in the
message area (the word SCHEDULE, for example).
SCHEDULE
Create and edit a schedule for your
thermostat to follow. (Available to edit
only if time based schedule or smart
schedule is configured.)
AWAY SETTING
Set energy saving temperature
setpoints for when you are away.
(Available if thermostat is included in
ZWave network.)
SCREEN LOCK
Lock the screen to limit access to
thermostat settings.
Z-Wave SETUP
Include or exclude the thermostat from
ZWave network.
BRIGHTNESS
Set the brightness of an inactive
backlight. (Available if the thermostat is
powered by 24 VAC.)
RECOVERY
Enable or disable the Adaptive
Intelligent Recovery feature.
CLOCK / DATE
Manually set the clock, clock format
and daylight saving time in the CLOCK
sub-menu, and date in the DATE sub-
menu.

12
Scheduling options
The T6 Pro ZWave thermostat offers flexible scheduling. The options available differ
depending on whether the thermostat is included/excluded from ZWave network.
1 No schedule
2 Time based schedule
3 Occupancy based schedule
4 Smart schedule
If the thermostat is not included in ZWave network:
The thermostat can be set as non-programmable (1), or you can program and follow a Time
based schedule (2) based on the time of day or day of the week.
The default program schedule is 52 (MonFri; SatSun), with different settings for weekdays
and weekends, four time periods per day. See the table below for the default settings, which
have adjustable periods and temperature setpoints.
Time based schedule:
Period Start Time Heat (MonFri) Cool (MonFri) Heat (SatSun) Cool (SatSun)
Wake 6:00 am 70 °78 °70 °78 °
Away 8:00 am 62 °85 °62 °85 °
Home 6:00 Pm 70 °78 °70 °78 °
Sleep 10:00 Pm 62 °85 °62 °85 °
If the thermostat is included in ZWave network:
It typically follows the settings of your ZWave controller. When not in Away mode,
it can either follow your Home temperature setpoint based on occupancy states
(Home/Away) sent by ZWave controller (3) or it can even differentiate between
Home and Sleep temperature setpoints according to actual time period (4).
The default program schedule is the Smart schedule, 52 (MonFri; SatSun), with
different settings for weekdays and weekends. See the table below for the default
settings, which have adjustable periods and temperature setpoints.
Smart Schedule:
Period Start Time Heat (MonFri) Cool (MonFri) Heat (SatSun) Cool (SatSun)
Away N/A* 62 °85 °62 °85 °
Home 6:00 Am 70 °78 °70 °78 °
Sleep 10:00 Pm 62 °85 °62 °85 °
To turn the Smart schedule off and to use just Occupancy based schedule (Home/
Away temperature setpoints only) go to thermostat MENU/SCHEDULE and turn
the Time based schedule off. See table below with default, adjustable temperature
setpoints.
Occupancy based schedule:
Period Start Time Heat Cool
Away N/A* 62 °85 °
Home N/A* 72 °78 °
*Triggered by ZWave controller
NOTES (for when the thermostat is INCLUDED in ZWave network):
• Away mode is an Energy saving setback mode triggered by ZWave controller or
gateway.
• Away setpoint is adjustable and common for all days, configurable in the
thermostat MENU/AWAY SETTING.
• Home setpoint in the Occupancy based schedule is temperature setpoint
adjustable on the thermostat Home screen. Common for all days.
• Home and Sleep setpoints in the Smart schedule are configurable in the
thermostat MENU/SCHEDULE.
Back Sched. On/Off

13
AM
Menu FanMode
Fan
Auto
Mode
Heat
Following Schedule
Schedule status
Active Time based schedule or Smart schedule is
indicated by "Following Schedule" text in top left
corner of the thermostat screen.
Schedule period
Shows current schedule period.
• Time-based schedule: Wake, Away, Home or
Sleep.
• Smart schedule: Away, Home or Sleep.
• Occupancy based schedule: Away or Home.
• No schedule: Schedule periods are not
displayed
Back Select
Setting a schedule
To edit a schedule on the thermostat screen,
follow the steps below.
1 Touch Menu on the thermostat home screen.
2 Touch the or arrows until you see
SCHEDULE, then touch Select.
3 Touch the or arrows to select a period in
a day or set of days, then touch Select on the
period you want to edit.
4 Touch the time area, then touch or to
adjust when the period starts. Touch Select to
confirm.
5 Touch the temperature area, then touch
or to adjust your preferred temperature
for the mode that’s currently active (either
heating or cooling). Touch Select to confirm.
Then touch or to adjust your preferred
temperature for the inactive mode. Touch
Select to confirm.
6 Edit the next period or use the until you
see DONE, then press Select to save changes
and go to the home screen.
NOTES:
• Schedule menu is available only if time based
schedule or smart schedule is configured.
• If not connected to ZWave network, Away
setpoint is programmable for each day or
group of days in MENU/SCHEDULE.
• If connected to ZWave network, Away
setpoint is a common for all days,
programmable in MENU/AWAY SETTING.
Back Select Sched. On/Off
AM
Menu FanMode
Fan
Auto
Mode
Heat
AwayHomeSleep
Following Schedule
Back Select Sched. On/Off
AM
HeatTo
Back Select
AM
HeatTo
Back Select

14
Reset schedule
Back Select
Back Select
No Yes
To reset your schedule back to the default
temperature setpoints (see page 12), follow
steps below.
1 Touch Menu on the thermostat screen.
2 Touch the or arrows until you see
RESET, then touch Select.
3 Touch the or arrows until you see
SCHEDULE, then touch Select.
4 Touch Yes to confirm.
To prevent unauthorized access to the thermostat, or to limit changes to the system
settings, there are two screen lock settings you can apply.
• Partial lock: Only the temperature can be changed.
• Full lock: No access is allowed without a PIN number.
Screen lock settings
Back Select
Back Select
No Yes
Back Select
Applying a screen lock setting
1 Touch Menu on the thermostat home screen.
2 Touch the or arrows until you see
SCREEN LOCK, then touch Select.
3 Touch the or arrows to select your
desired screen lock setting, then touch Select.
4 A PIN number will appear on screen. Write it
down and keep it in a safe place.
5 Touch Select, and confirm your screen lock
setting by touching Yes.
A partially or fully locked screen will be indicated
by a lock symbol at the bottom of the thermostat
screen.
Back Select
Unlocking the screen
1 Touch the lock symbol on the thermostat
home screen.
2 When prompted to enter a PIN number,
touch or to select the first number of
the PIN code. Touch Select to confirm, and
repeat for the remaining numbers.
When you enter the correct PIN, you’ll return
to the thermostat home screen. To re-lock the
screen after you’re done making changes, follow
the steps above to apply a lock setting.
AM
Fan
Auto
Mode
Heat
AwayHomeSleep
Following Schedule

15
When the thermostat is in idle mode, you can
adjust how bright you’d like the screen. You
can choose a brightness level from 00 (display
backlight is off, which is the default) up to 05
(maximum brightness). To adjust backlight
brightness, follow the steps below.
1 Touch Menu on the thermostat home screen.
2 Touch the or arrows until you see
BRIGHTNESS, then touch Select.
3 Touch or to adjust the brightness level,
which will change immediately.
4 Touch Done to confirm.
NOTE: This setting is only available if thermostat
is powered by 24 VAC. This setting only applies
to times when thermostat is not touched. When
adjusting settings thermostat is always at full
brightness.
Adjusting backlight brightness
Back Select Done Cancel
Over time, your T6 Pro ZWave thermostat will
learn how long it takes your system to reach the
desired temperature. It can then turn on your
heating or cooling equipment at the right time to
make sure your home is comfortable by the time
you expect. This feature is enabled by default. To
disable it, follow the steps below.
1 Touch Menu on the thermostat home screen.
2 Touch the or arrows until you see
RECOVERY, then touch Select.
3 Touch the or arrows to select
RECOVERY ON or RECOVERY OFF, then
touch Done to confirm.
When Adaptive Intelligent Recovery is active,
you’ll see the recovery symbol in the upper-right
corner of the thermostat screen.
Enabling/disabling Adaptive Intelligent Recovery
Back Select Done
Cancel
Recovery
AM
Menu FanMode
Fan
Auto
Mode
Heat
AwayHomeSleep
Following Schedule
Recovery

16
Setting the time and date
Back Select
PM
Done Cancel
Back Select
Setting the time
1 Touch Menu on the thermostat home screen.
2 Touch the or arrows until you see
CLOCK, then touch Select.
3 Touch the or arrows until you see SET
TIME, then touch Select.
4 Press or to set the time (or press and
hold the buttons to move more quickly).
Touch Done when finished.
5 Set clock format (12 hours or 24 hours) and
daylight saving time in the same CLOCK
sub-menu.
Setting the date
1 Touch Menu on the thermostat home screen.
2 Touch the or arrows until you see DATE,
then touch Select.
3 Touch or to set the month, then touch
Select to confirm.
4 Continue to set day and year in the same
way. Touch Select to save your changes.
Back Select
With the clean screen option, you can lock the
thermostat screen so you don’t accidentally
change your settings when you clean. Follow the
steps below to activate clean screen mode.
1 Touch Menu on the thermostat home screen.
2 Touch the or arrows until you see
CLEAN SCREEN, then touch Select.
The screen will deactivate for 30 seconds. A
countdown timer will display the amount of time
until screen reactivation.
Tip: To clean the thermostat screen, spray water
or household cleaner onto a cloth, then use
the cloth to clean the screen. Avoid abrasive
cleaners and do NOT spray liquid directly on the
thermostat.
Cleaning the thermostat screen
Back Select

17
To select a temperature scale, follow the steps
below.
1 Touch Menu on the thermostat home screen.
2 Touch the or arrows until you see TEMP
SCALE, then touch Select.
3 Touch the or arrows to select
FAHRENHEIT or CELSIUS then touch Done to
save your changes.
4 Touch Back to return to the thermostat home
screen.
Choosing Fahrenheit or Celsius
Back Select
Done
Cancel
Recovery
You can check the status of your heating or
cooling equipment and fan by following the
steps below. Please note that system data may
vary depending on thermostat model and how
the thermostat was installed.
1 Touch Menu on the thermostat home screen.
2 Touch the or arrows until you see EQMT
STATUS, then touch Select.
3 Touch the or arrows to select which
system you want status information on.
After 3 seconds, system status information will
scroll on the screen.
Viewing equipment status
Back Select
Done
Done

18
To see your thermostat’s technical information,
follow the steps below.
1 Touch Menu on the thermostat home screen.
2 Touch the or arrows until you see
DEVICE INFO, then touch Select.
3 Touch the or arrows to view information
such as:
• Model Number
• Power Mode
• ZWave Node ID
• ZWave Home ID
• Serial Number
• Date code
• Firmware version
• ZWave Firmware version
• ZWave library
Viewing thermostat information
Back Select

19
Battery replacement
Batteries are optional (to provide backup power)
if your thermostat was wired to run on 24 VAC
power when installed. If your thermostat was
wired to run on 24 VAC power, then batteries are
NOT required.
Install fresh batteries immediately when the low
battery alert appears. The alert appears about
two months before the batteries are depleted.
Even if the low battery alert does not appear, you
should replace batteries once a year, or before
leaving home for more than a month.
If batteries are inserted within two minutes, the
time and day will not have to be reset. All other
settings are permanently stored in memory, and
do not require battery power.
NOTES:
• When replacing batteries, alkaline batteries
are recommended.
• When the battery power is low, the
thermostat’s backlight is disabled to save
battery power.
• When battery power is critically low, only the
alert icon and the battery icon are displayed,
and the thermostat cannot control your
HVAC system. Batteries must be replaced
immediately.
When the low battery alert appears,
press gently to loosen the thermostat
and then carefully pull it from the
wall mount.
Insert fresh alkaline AA batteries and
reinstall thermostat. Match the polar-
ity of the batteries with the
+ / – marks inside the battery com-
partment.
Auto Chg. On
AM
Menu FanMode
Fan
Auto
Mode
Heat
AwayHomeSleep
Following Schedule

20
Alerts and maintenance reminders
The T6 Pro ZWave thermostat comes with a set of Smart Alerts that helps keep your
heating and cooling system running correctly and efficiently. If Smart Alerts are set up
by your HVAC professional, you can get reminders when it’s time to change the filter
and when your system is not running correctly.
Non-critical alerts and maintenance reminders can be snoozed for up to 7 days and/
or dismissed. Some critical alerts cannot be snoozed or dismissed as your heating or
cooling system may require service.
When there’s an active alert or maintenance reminder, you’ll see the alert symbol
on the thermostat home screen. To see alert information, follow the steps below.
1 Touch Menu on the thermostat home screen, then you’ll see the ALERTS sub-menu.
(The ALERTS sub-menu will only be available when there’s an active alert.)
2 Touch Select to view the alert. A 3-digit alert code will appear by the thermostat’s
clock and a description of the alert will scroll on the screen.
3 If the alert is non-critical, you’ll have the option to Snooze or Dismiss it. If you have
multiple alerts, touch the or arrows to page through the list of active alerts
and follow steps 1 and 2 above.
To see what each 3-digit alert code means and the action you should take, refer to the
chart below.
Number Alert/Reminder Definition
54 Thermostat
Humidity
Sensor Error
The sensor of the thermostat has encountered
an error. Please contact dealer to replace the
thermostat.
164 Heat Pump
Needs Service
Heat pump needs service. Contact dealer to
diagnose and service heat pump.
170 Internal Memory
Error
The memory of the thermostat has encountered an
error. Please contact dealer for assistance.
171 Set the Date
and Time
Set the date and time on your thermostat. The date
and time are required for certain features to operate,
like the program schedule.
173 Thermostat
Temperature
Sensor Error
The sensor of the thermostat has encountered
an error. Please contact dealer to replace the
Thermostat.
177 Indoor
Temperature
Sensor Error
Wired indoor temperature sensor is not connected
or there is a wiring short. Please contact dealer for
assistance.
178 Outdoor
Temperature
Sensor Error
Wired outdoor temperature sensor is not connected
or there is a wiring short. Please contact dealer for
assistance.
181 Replace Air
Filter (1)
Replace air filter (1). Reset the timer by touching
the "dismiss" button on thermostat screen after it is
replaced.
182 Replace Air
Filter (2)
Replace air filter (2). Reset the timer by touching
the "dismiss" button on thermostat screen after it is
replaced.