Honggi HK-A326 User manual

User Manual
HK-A326
Honggi

General introduction & Functionality
Remote Controller
A
B
C
D
Receiver & Switcher
AAM(1.5V)
AAM(1.5V)
AB
☞ Battery Specifications
DC 3.0V
AAM X 2
Rear View
Power Input
120V AC
Controlled Outputs
A Port B Port
Common
Button
Receiver A-Port turn on/off
Receiver B-Port turn on/off
Receiver All-Ports turn on/off
Delayed auto off function
(2 times press button)
-2 -

Safety Instructions
Cleaning and maintenance
Recycling and disposal
Warranty and servise
FCC ID &..
Specifications
☞ Do not immerse in water.
☞ Do not use in wet environment.
☞ To avoid scratching. remote control should only be cleaned
with soft dry cloth.
the plastic parts.
☞ Do not use strong chemical or cleaning agent as it may damage
☞ Please dispose in accordance with instructions from the local authority.
☞ Remove the batteries when you discard the remote control.
☞ Do not throw the batteries away with normal household waste.
☞ If you service or information or if you have a problem,
Please contact the store of purchase.
☞ The product A/S period is 2 years.
Part Name Parameters
Operation Voltage AC 120V ± 10%
Output power 150 Watts Max. (each Ports)
Ambient Temperature 0℃∼40℃
Transmission method RF 315MHz (OOK Mod.)
Transmission distance 10 Meters Min.(Omni-directional)
Battery Voltage DC3.0V ( AAM X 2 )
Receiver
Remote
controller
±
-3 -
Last update : 10/04/21

Part 15 statements
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.