are broken, damaged, or loose. If equipment appears to be
damaged or defective please contact us for assistance.
3. Special Attention
(i) The installer must comply with electrical safety standards.
There must be sufficient space between the camera's
power supply and video line and any high voltage
equipment and/or cables.
(ii) To help ensure the camera's life and proper operation do
not point the camera towards the sun or strong light.
(iii) Do not install the camera in an environment where the
temperature is too high or too low, recommended operating
temperature is 14F ~ 122F.
(iv) Do not install the camera near a magnetic field or a high-
power motor.
(v) Only use a dry cloth to clean the camera. If there is dirt that
is difficult to remove, wipe gently with a mild detergent.
Never use strong or abrasive detergents.
(vi) A 12V DC 1A or 2A power supply must be used. AC power
cannot be applied. AC power will damage the camera and
void warranty. Power supply output voltage, current,
